UCD-SNMP-MIB DEFINITIONS ::= BEGIN

-- Design notes:
--
-- The design of this mib may seem unusual in parts, as it was
-- designed for ease of numerical management routines.
--
-- In that light, most sub-sections of this mib have four common
-- numerical oid consistencies:
--
-- 2021.ID.1   : an integer index value.  In scalers, this is always
--               of value 1.  In tables it is a row index.
-- 2021.ID.2   : a name of the script, process, etc. that this row represents.
-- 2021.ID.100 : An error flag indicating if an error is present on
--               that row (a threshold value was crossed, etc).
-- 2021.ID.101 : An error string describing why the error flag is non-0.
--
-- These conventions enable managers to easy examine portions of the
-- mib by setting the ID to the sub-section they are interested in
-- monitoring, and then scanning the .100 value to check for an
-- error(s), and get a more specific error message from .101 for the
-- named check found in .2.
--
-- Row numbers between 2 and 100 are sub-section specific.
--
-- Mib sections utilizing the above conventions:
--   Tables:   procTable, execTable, diskTable, loadTable
--   Scalers: memory, snmperrs


IMPORTS
   OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY,
   Integer32, Opaque, enterprises, Counter32
       FROM SNMPv2-SMI

   TEXTUAL-CONVENTION, DisplayString, TruthValue
FROM SNMPv2-TC;

ucdavis MODULE-IDENTITY
   LAST-UPDATED "200209050000Z"
   ORGANIZATION "University of California, Davis"
   CONTACT-INFO
"This mib is no longer being maintained by the University of
California and is now in life-support-mode and being
maintained by the net-snmp project.  The best place to write
for public questions about the net-snmp-coders mailing list
at net-snmp-coders@lists.sourceforge.net.

        postal:   Wes Hardaker
                  P.O. Box 382
                  Davis CA  95617

        email:    net-snmp-coders@lists.sourceforge.net
       "
   DESCRIPTION
"Added ssCpuRawSoftIRQ for Linux (2.6) and forgotten raw swap counters."
   REVISION "200404070000Z"
   DESCRIPTION
"Deprecate the non-raw objects."
   REVISION "200209050000Z"
   DESCRIPTION
"This file defines the private UCD SNMP MIB extensions."
   REVISION "200101170000Z"
   DESCRIPTION
"Added raw CPU and IO counters."
   REVISION "9912090000Z"
   DESCRIPTION
"SMIv2 version converted from older MIB definitions."
   ::= { enterprises 2021 }

-- Current UCD core mib table entries:
--   prTable          OBJECT IDENTIFIER ::= { ucdavis   2 }
--   memory           OBJECT IDENTIFIER ::= { ucdavis   4 }
--   extTable         OBJECT IDENTIFIER ::= { ucdavis   8 }
--   diskTable        OBJECT IDENTIFIER ::= { ucdavis   9 }
--   loadTable        OBJECT IDENTIFIER ::= { ucdavis  10 }
--   systemStats      OBJECT IDENTIFIER ::= { ucdavis  11 }
--   ucdDemoMIB       OBJECT IDENTIFIER ::= { ucdavis  14 } - UCD-DEMO-MIB
--   fileTable        OBJECT IDENTIFIER ::= { ucdavis  15 }
--   logmatch         OBJECT IDENTIFIER ::= { ucdavis  15 }
--   version          OBJECT IDENTIFIER ::= { ucdavis 100 }
--   snmperrs         OBJECT IDENTIFIER ::= { ucdavis 101 }
--   mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 }

-- Older mib table entries that were changed to new locations above:
--   processes        OBJECT IDENTIFIER ::= { ucdavis   1 }
--   exec             OBJECT IDENTIFIER ::= { ucdavis   3 }
--   disk             OBJECT IDENTIFIER ::= { ucdavis   6 }
--   load             OBJECT IDENTIFIER ::= { ucdavis   7 }

-- Never implemented and removed from the mib:
--   lockd            OBJECT IDENTIFIER ::= { ucdavis   5 }

-- Branches for registering other UCD MIB modules:
ucdInternal           OBJECT IDENTIFIER ::= { ucdavis 12 }
ucdExperimental       OBJECT IDENTIFIER ::= { ucdavis 13 }

-- OID values assigned in the ucdExperimental branch:
--   ucdIpFwAccMIB    OBJECT IDENTIFIER ::= { ucdExperimental  1 } - UCD-IPFWACC-MIB
--   ucdIpFilter      OBJECT IDENTIFIER ::= { ucdExperimental  2 } - UCD-IPFILTER-MIB
--   wavelan          OBJECT IDENTIFIER ::= { ucdExperimental  3 } - WL-MIB
--   ucdDlmodMIB      OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB
--   ucdDiskIOMIB     OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB
--   lmSensors        OBJECT IDENTIFIER ::= { ucdExperimental 16 } - LM-SENSORS-MIB


-- These are the returned values of the agent type.
-- returned to:  .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0

ucdSnmpAgent      OBJECT IDENTIFIER ::= { ucdavis 250 }
hpux9             OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 }
sunos4            OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 }
solaris           OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 }
osf               OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 }
ultrix            OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 }
hpux10            OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 }
netbsd1           OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 }
freebsd           OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 }
irix              OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 }
linux             OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 }
bsdi              OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 }
openbsd           OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 }
win32  OBJECT IDENTIFIER ::= { ucdSnmpAgent 13 } -- unlucky
hpux11            OBJECT IDENTIFIER ::= { ucdSnmpAgent 14 }
unknown           OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 }


--
-- Define the Float Textual Convention
--   This definition was written by David Perkins.
--

Float ::= TEXTUAL-CONVENTION
   STATUS      current
   DESCRIPTION
       "A single precision floating-point number.  The semantics
        and encoding are identical for type 'single' defined in
        IEEE Standard for Binary Floating-Point,
        ANSI/IEEE Std 754-1985.
        The value is restricted to the BER serialization of
        the following ASN.1 type:
            FLOATTYPE ::= [120] IMPLICIT FloatType
        (note: the value 120 is the sum of '30'h and '48'h)
        The BER serialization of the length for values of
        this type must use the definite length, short
        encoding form.

        For example, the BER serialization of value 123
        of type FLOATTYPE is '9f780442f60000'h.  (The tag
        is '9f78'h; the length is '04'h; and the value is
        '42f60000'h.) The BER serialization of value
        '9f780442f60000'h of data type Opaque is
        '44079f780442f60000'h. (The tag is '44'h; the length
        is '07'h; and the value is '9f780442f60000'h."
   SYNTAX Opaque (SIZE (7))

--
-- Process table checks
--

prTable OBJECT-TYPE
   SYNTAX SEQUENCE OF PrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"A table containing information on running
programs/daemons configured for monitoring in the
snmpd.conf file of the agent.  Processes violating the
number of running processes required by the agent's
configuration file are flagged with numerical and
textual errors."
   ::= { ucdavis 2 }

prEntry OBJECT-TYPE
   SYNTAX PrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       "An entry containing a process and its statistics."
   INDEX { prIndex }
   ::= { prTable  1 }

PrEntry ::= SEQUENCE {
   prIndex Integer32,
   prNames DisplayString,
   prMin Integer32,
   prMax Integer32,
   prCount Integer32,
   prErrorFlag Integer32,
   prErrMessage DisplayString,
   prErrFix Integer32,
   prErrFixCmd DisplayString
}

prIndex OBJECT-TYPE
   SYNTAX Integer32 (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Reference Index for each observed process."
   ::= { prEntry 1 }

prNames OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The process name we're counting/checking on."
   ::= { prEntry 2 }

prMin OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The minimum number of processes that should be
running.  An error flag is generated if the number of
running processes is < the minimum."
   ::= { prEntry 3 }

prMax OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The maximum number of processes that should be
running.  An error flag is generated if the number of
running processes is > the maximum."
   ::= { prEntry 4 }

prCount OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The number of current processes running with the name
in question."
   ::= { prEntry 5 }

prErrorFlag OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"A Error flag to indicate trouble with a process.  It
goes to 1 if there is an error, 0 if no error."
   ::= { prEntry 100 }

prErrMessage OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"An error message describing the problem (if one exists)."
   ::= { prEntry 101 }

prErrFix OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
"Setting this to one will try to fix the problem if
the agent has been configured with a script to call
to attempt to fix problems automatically using remote
snmp operations."
   ::= { prEntry 102 }

prErrFixCmd OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The command that gets run when the prErrFix column is
set to 1."
   ::= { prEntry 103 }



extTable OBJECT-TYPE
   SYNTAX SEQUENCE OF ExtEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"A table of extensible commands returning output and
result codes.  These commands are configured via the
agent's snmpd.conf file."
   ::= { ucdavis 8 }

extEntry OBJECT-TYPE
   SYNTAX     ExtEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       "An entry containing an extensible script/program and its output."
   INDEX      { extIndex }
   ::= { extTable  1 }

ExtEntry ::= SEQUENCE {
   extIndex Integer32,
   extNames DisplayString,
   extCommand DisplayString,
   extResult Integer32,
   extOutput DisplayString,
   extErrFix Integer32,
   extErrFixCmd DisplayString
}

extIndex OBJECT-TYPE
   SYNTAX Integer32 (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Reference Index for extensible scripts.  Simply an
integer row number."
   ::= { extEntry 1 }

extNames OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"A Short, one name description of the extensible command."
   ::= { extEntry 2 }

extCommand OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The command line to be executed."
   ::= { extEntry 3 }

extResult OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The result code (exit status) from the executed command."
   ::= { extEntry 100 }

extOutput OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The first line of output of the executed command."
   ::= { extEntry 101 }

extErrFix OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
"Setting this to one will try to fix the problem if
the agent has been configured with a script to call
to attempt to fix problems automatically using remote
snmp operations."
   ::= { extEntry 102 }

extErrFixCmd OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The command that gets run when the extErrFix column is
set to 1."
   ::= { extEntry 103 }

--
-- Memory usage/watch reporting.
-- Not supported on all systems!
-- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture.
--
memory OBJECT IDENTIFIER ::= { ucdavis 4 }

memIndex OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Bogus Index.  This should always return the integer 0."
   ::= { memory 1 }

memErrorName OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Bogus Name. This should always return the string 'swap'."
   ::= { memory 2 }

memTotalSwap OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total Swap Size configured for the host."
   ::= { memory 3 }

memAvailSwap OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Available Swap Space on the host."
   ::= { memory 4 }

memTotalReal OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total Real/Physical Memory Size on the host."
   ::= { memory 5 }

memAvailReal OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Available Real/Physical Memory Space on the host."
   ::= { memory 6 }

memTotalSwapTXT OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total virtual memory used by text."
   ::= { memory 7 }

memAvailSwapTXT OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Active virtual memory used by text."
   ::= { memory 8 }

memTotalRealTXT OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total Real/Physical Memory Size used by text."
   ::= { memory 9 }

memAvailRealTXT OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Active Real/Physical Memory Space used by text."
   ::= { memory 10 }

memTotalFree OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total Available Memory on the host"
   ::= { memory 11 }

memMinimumSwap OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Minimum amount of free swap required to be free
or else memErrorSwap is set to 1 and an error string is
returned memSwapErrorMsg."
   ::= { memory 12 }

memShared OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total Shared Memory"
   ::= { memory 13 }

memBuffer OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total Buffered Memory"
   ::= { memory 14 }

memCached OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total Cached Memory"
   ::= { memory 15 }

memSwapError OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Error flag.  1 indicates very little swap space left"
   ::= { memory 100 }

memSwapErrorMsg OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Error message describing the Error Flag condition"
   ::= { memory 101 }


dskTable OBJECT-TYPE
   SYNTAX SEQUENCE OF DskEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Disk watching information.  Partions to be watched
are configured by the snmpd.conf file of the agent."
   ::= { ucdavis 9 }

dskEntry OBJECT-TYPE
   SYNTAX     DskEntry
   MAX-ACCESS not-accessible
   STATUS     current
   DESCRIPTION
       "An entry containing a disk and its statistics."
   INDEX      { dskIndex }
   ::= { dskTable  1 }

DskEntry ::= SEQUENCE {
   dskIndex Integer32,
   dskPath DisplayString,
   dskDevice DisplayString,
   dskMinimum Integer32,
   dskMinPercent Integer32,
   dskTotal Integer32,
   dskAvail Integer32,
   dskUsed Integer32,
   dskPercent Integer32,
   dskPercentNode Integer32,
   dskErrorFlag Integer32,
   dskErrorMsg DisplayString
}

dskIndex OBJECT-TYPE
   SYNTAX Integer32 (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Integer reference number (row number) for the disk mib."
   ::= { dskEntry 1 }

dskPath OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Path where the disk is mounted."
   ::= { dskEntry 2 }

dskDevice OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Path of the device for the partition"
   ::= { dskEntry 3 }

dskMinimum OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Minimum space required on the disk (in kBytes) before the
        errors are triggered.  Either this or dskMinPercent is
        configured via the agent's snmpd.conf file."
   ::= { dskEntry 4 }

dskMinPercent OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Percentage of minimum space required on the disk before the
        errors are triggered.  Either this or dskMinimum is
        configured via the agent's snmpd.conf file."
   ::= { dskEntry 5 }

dskTotal OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Total size of the disk/partion (kBytes)"
   ::= { dskEntry 6 }

dskAvail OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Available space on the disk"
   ::= { dskEntry 7 }

dskUsed OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Used space on the disk"
   ::= { dskEntry 8 }

dskPercent OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Percentage of space used on disk"
   ::= { dskEntry 9 }

dskPercentNode OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Percentage of inodes used on disk"
   ::= { dskEntry 10 }

dskErrorFlag OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Error flag signaling that the disk or partition is under
the minimum required space configured for it."
   ::= { dskEntry 100 }

dskErrorMsg OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"A text description providing a warning and the space left
on the disk."
   ::= { dskEntry 101 }

laTable OBJECT-TYPE
   SYNTAX SEQUENCE OF LaEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Load average information."
   ::= { ucdavis 10 }

laEntry OBJECT-TYPE
   SYNTAX LaEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"An entry containing a load average and its values."
   INDEX { laIndex }
   ::= { laTable  1 }

LaEntry ::= SEQUENCE {
   laIndex Integer32,
   laNames DisplayString,
   laLoad DisplayString,
   laConfig DisplayString,
   laLoadInt Integer32,
   laLoadFloat Float,
   laErrorFlag Integer32,
   laErrMessage DisplayString
}

laIndex OBJECT-TYPE
   SYNTAX Integer32 (0..3)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"reference index/row number for each observed loadave."
   ::= { laEntry 1 }

laNames OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The list of loadave names we're watching."
   ::= { laEntry 2 }

laLoad OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The 1,5 and 10 minute load averages (one per row)."
   ::= { laEntry 3 }

laConfig OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The watch point for load-averages to signal an
error.  If the load averages rises above this value,
the laErrorFlag below is set."
   ::= { laEntry 4 }

laLoadInt OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The 1,5 and 10 minute load averages as an integer.
This is computed by taking the floating point
loadaverage value and multiplying by 100, then
converting the value to an integer."
   ::= { laEntry 5 }

laLoadFloat OBJECT-TYPE
   SYNTAX Float
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The 1,5 and 10 minute load averages as an opaquely
wrapped floating point number."
   ::= { laEntry 6 }

laErrorFlag OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"A Error flag to indicate the load-average has crossed
its threshold value defined in the snmpd.conf file.
It is set to 1 if the threshold is crossed, 0 otherwise."
   ::= { laEntry 100 }

laErrMessage OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"An error message describing the load-average and its
surpased watch-point value."
   ::= { laEntry 101 }


version OBJECT IDENTIFIER ::= { ucdavis 100 }

versionIndex OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Index to mib (always 0)"
   ::= { version 1 }

versionTag OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"CVS tag keyword"
   ::= { version 2 }

versionDate OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Date string from RCS keyword"
   ::= { version 3 }

versionCDate OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Date string from ctime() "
   ::= { version 4 }

versionIdent OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Id string from RCS keyword"
   ::= { version 5 }

versionConfigureOptions OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Options passed to the configure script when this agent was built."
   ::= { version 6 }

versionClearCache OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
"Set to 1 to clear the exec cache, if enabled"
   ::= { version 10 }

versionUpdateConfig OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
"Set to 1 to read-read the config file(s)."
   ::= { version 11 }

versionRestartAgent OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
"Set to 1 to restart the agent."
   ::= { version 12 }

versionSavePersistentData OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
"Set to 1 to force the agent to save it's persistent data immediately."
   ::= { version 13 }

versionDoDebugging OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
"Set to 1 to turn debugging statements on in the agent or 0
to turn it off."
   ::= { version 20 }


snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 }

snmperrIndex OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Bogus Index for snmperrs (always 0)."
   ::= { snmperrs 1 }

snmperrNames OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"snmp"
   ::= { snmperrs 2 }

snmperrErrorFlag OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"A Error flag to indicate trouble with the agent.  It
goes to 1 if there is an error, 0 if no error."
   ::= { snmperrs 100 }

snmperrErrMessage OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"An error message describing the problem (if one exists)."
   ::= { snmperrs 101 }


mrTable OBJECT-TYPE
   SYNTAX SEQUENCE OF MrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"A table displaying all the oid's registered by mib modules in
the agent.  Since the agent is modular in nature, this lists
each module's OID it is responsible for and the name of the module"
   ::= { ucdavis 102 }

mrEntry OBJECT-TYPE
   SYNTAX MrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"An entry containing a registered mib oid."
   INDEX { IMPLIED mrIndex }
   ::= { mrTable 1 }

MrEntry ::= SEQUENCE {
   mrIndex OBJECT IDENTIFIER,
   mrModuleName DisplayString
}

mrIndex OBJECT-TYPE
   SYNTAX OBJECT IDENTIFIER
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The registry slot of a mibmodule."
   ::= { mrEntry  1 }

mrModuleName OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The module name that registered this OID."
   ::= { mrEntry  2 }

systemStats OBJECT IDENTIFIER ::= { ucdavis 11 }

ssIndex OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Reference Index for each observed systemStat (1)."
   ::= { systemStats 1 }

ssErrorName OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The list of systemStats names (vmstat) we're Counting."
   ::= { systemStats 2 }

ssSwapIn OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Amount of memory swapped in from disk (kB/s)."
   ::= { systemStats 3 }

ssSwapOut OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Amount of memory swapped to disk (kB/s)."
   ::= { systemStats 4 }

ssIOSent OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS deprecated
   DESCRIPTION
"Blocks sent to a block device (blocks/s). Deprecated, replaced by
the ssIORawSent object"
   ::= { systemStats 5 }

ssIOReceive OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS deprecated
   DESCRIPTION
"Blocks received from a block device (blocks/s). Deprecated, replaced by
the ssIORawReceived object"
   ::= { systemStats 6 }

ssSysInterrupts OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS deprecated
   DESCRIPTION
"The number of interrupts per second, including the clock.
Deprecated, replaced by ssRawInterrupts"
   ::= { systemStats 7 }

ssSysContext OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS deprecated
   DESCRIPTION
"The number of context switches per second.
Deprecated, replaced by ssRawContext"
   ::= { systemStats 8 }

ssCpuUser OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS deprecated
   DESCRIPTION
"percentages of user CPU time. Deprecated, replaced by the ssCpuRawUser
object"
   ::= { systemStats 9 }

ssCpuSystem OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS deprecated
   DESCRIPTION
"percentages of system CPU time. Deprecated, replaced by of the
ssCpuRawSystem object"
   ::= { systemStats 10 }

ssCpuIdle OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS deprecated
   DESCRIPTION
"percentages of idle CPU time. Deprecated, replaced by of the
ssCpuRawIdle object"
   ::= { systemStats 11 }

-- The agent only implements those of the following counters that the
-- kernel supports! Don't expect all to be present.

ssCpuRawUser OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "user CPU time."
   ::= { systemStats 50 }

ssCpuRawNice OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "nice CPU time."
   ::= { systemStats 51 }

ssCpuRawSystem OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "system CPU time."
   ::= { systemStats 52 }

ssCpuRawIdle OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "idle CPU time."
   ::= { systemStats 53 }

ssCpuRawWait OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "iowait CPU time. This is primarily a SysV thingie"
   ::= { systemStats 54 }

ssCpuRawKernel OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "kernel CPU time."
   ::= { systemStats 55 }

ssCpuRawInterrupt OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "interruptlevel CPU time. This is primarily a BSD thingie"
   ::= { systemStats 56 }

ssIORawSent OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of blocks sent to a block device"
   ::= { systemStats 57 }

ssIORawReceived OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of blocks received from a block device"
   ::= { systemStats 58 }

ssRawInterrupts OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of interrupts processed"
   ::= { systemStats 59 }

ssRawContexts OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of context switches"
   ::= { systemStats 60 }

ssCpuRawSoftIRQ OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Soft IRQ CPU time. This is for Linux 2.6"
   ::= { systemStats 61 }

ssRawSwapIn OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of blocks swapped in"
   ::= { systemStats 62 }

ssRawSwapOut OBJECT-TYPE
   SYNTAX      Counter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "Number of blocks swapped out"
   ::= { systemStats 63 }

-- possibly used in the future:
--
-- ssErrorFlag OBJECT-TYPE
--     SYNTAX   Integer32
--     MAX-ACCESS  read-only
--     STATUS      current
--     DESCRIPTION
--         "Error flag."
--     ::= { systemStats 100 }
--
-- ssErrMessage OBJECT-TYPE
--     SYNTAX      DisplayString
--     MAX-ACCESS  read-only
--     STATUS      current
--     DESCRIPTION
--         "Error message describing the errorflag condition."
--     ::= { systemStats 101 }


ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 }

ucdStart NOTIFICATION-TYPE
   STATUS current
   DESCRIPTION
""
   ::= { ucdTraps 1 }

ucdShutdown NOTIFICATION-TYPE
   STATUS current
   DESCRIPTION
"This trap is sent when the agent terminates"
   ::= { ucdTraps 2 }

--
-- File Table:  monitor a list of files to check for a maximum size.
--

fileTable OBJECT-TYPE
   SYNTAX SEQUENCE OF FileEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Table of monitored files."
   ::= { ucdavis 15 }

fileEntry OBJECT-TYPE
   SYNTAX FileEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Entry of file"
   INDEX { fileIndex }
   ::= { fileTable 1 }

FileEntry ::= SEQUENCE {
   fileIndex Integer32,
   fileName DisplayString,
   fileSize Integer32,
   fileMax Integer32,
   fileErrorFlag TruthValue,
   fileErrorMsg DisplayString
}

fileIndex OBJECT-TYPE
   SYNTAX Integer32 (0..2147483647)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Index of file"
   ::= { fileEntry 1 }

fileName OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Filename"
   ::= { fileEntry 2 }

fileSize OBJECT-TYPE
   SYNTAX Integer32
   UNITS       "kB"
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Size of file (kB)"
   ::= { fileEntry 3 }

fileMax OBJECT-TYPE
   SYNTAX Integer32
   UNITS       "kB"
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Limit of filesize (kB)"
   ::= { fileEntry 4 }

fileErrorFlag OBJECT-TYPE
   SYNTAX TruthValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Limit exceeded flag"
   ::= { fileEntry 100 }

fileErrorMsg OBJECT-TYPE
   SYNTAX DisplayString
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Filesize error message"
   ::= { fileEntry 101 }

logMatch OBJECT IDENTIFIER ::= { ucdavis 16 }

logMatchMaxEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of logmatch entries
this snmpd daemon can support."
::= { logMatch 1 }

logMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of monitored files."
::= { logMatch 2 }

logMatchEntry OBJECT-TYPE
SYNTAX LogMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of file"
INDEX { logMatchIndex }
::= { logMatchTable 1 }

LogMatchEntry ::=
SEQUENCE {
logMatchIndex
Integer32,
logMatchName
DisplayString,
logMatchFilename
DisplayString,
logMatchRegEx
DisplayString,
logMatchGlobalCounter
Counter32,
logMatchGlobalCount
Integer32,
logMatchCurrentCounter
Counter32,
logMatchCurrentCount
Integer32,
logMatchCounter
Counter32,
logMatchCount
Integer32,
logMatchCycle
Integer32,
logMatchErrorFlag
TruthValue,
logMatchRegExCompilation
DisplayString
}

logMatchIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of logmatch"
::= { logMatchEntry 1 }

logMatchName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"logmatch instance name"
::= { logMatchEntry 2 }

logMatchFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"filename to be logmatched"
::= { logMatchEntry 3 }

logMatchRegEx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"regular expression"
::= { logMatchEntry 4 }

logMatchGlobalCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"global count of matches"
::= { logMatchEntry 5 }

logMatchGlobalCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 6 }

logMatchCurrentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Regex match counter. This counter will
be reset with each logfile rotation."
::= { logMatchEntry 7 }

logMatchCurrentCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 8 }

logMatchCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Regex match counter. This counter will
be reset with each read"
::= { logMatchEntry 9 }

logMatchCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 10 }

logMatchCycle OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time between updates (if not queried) in seconds"
::= { logMatchEntry 11 }

logMatchErrorFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"errorflag: is this line configured correctly?"
::= { logMatchEntry 100 }

logMatchRegExCompilation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"message of regex precompilation"
::= { logMatchEntry 101 }

END