Domino-MIB-Version V6.0
Welcome: Guest
Search for:
in
SNMP Center > Mibs > Raw Text View
NOTES-MIB: IBM Domino MIB Specification
-- Domino MIB Specification (the "Specification")
-- Copyright (c) 1994-2003 IBM Corporation
--
--<< Domino-MIB-Version V6.0
--
--References to NotesView are purely historical in nature and should not
--be construed as continued support for NotesView.
--
--Use and restrictions. You are permitted to use, reproduce and distribute
--the Specification and this document ("Document"), provided you comply
--with the following terms.
--
--You shall distribute the Specification and Document with the text of this
--entire copyright notice and agreement. You may not modify, alter or create
--derivatives of the Specification or Document without prior written
--permission from Lotus. You may not loan or license the Specification or
--Document, or any copy.
--
--Ownership. All intellectual property rights in the Specification and
--Document are owned by Lotus or its suppliers and are protected by United
--States and Canadian copyright laws, other applicable copyright laws, and
--international treaty provisions.
--Lotus retains all rights not expressly granted.
--
--No warranty. Lotus is supplying the Specification and Document "as is",
--without warranty, representation, promise or guarantee, either express or
--implied, statutory or otherwise, with respect to the Specification and
--Document, including their quality, performance, merchantability or fitness
--for a particular purpose.
--
--LIMITATION OF LIABILITY
--Because software is inherently complex and may not be completely free of
--errors, it is your responsibility to verify your work and to make backup
--copies, and Lotus will not be responsible for your failure to do so. In
--no event will Lotus be liable for direct, indirect, special, incidental,
--or consequential damages arising out of this Agreement or out of the use
--Lotus products or services, including, without limitation, damages or
--costs relating to the loss of profits, business, goodwill, data or
--computer programs, even if advised of the possibility of such damages. The
--foregoing limitations shall not apply to claims relating to death or
--personal injury which arise out of products deemed to be consumer goods
--under applicable law. Some states or provinces do not allow the exclusion
--or limitation of implied warranties or limitation of liability for
--incidental or consequential damages, so the above exclusion or limitation
--may not apply to you.
--
--For U.S. customers: Should you have any questions concerning this
--Agreement or Lotus software use policies, write to Inside Sales and
--Service, Lotus Development Corporation, 55 Cambridge Parkway,
--Cambridge, MA 02142, or call 1-800-343-5414.
NOTES-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
TRAP-TYPE FROM RFC-1215;
--Definitions for Lotus enterprise branch and Notes sub-branch
lotus OBJECT IDENTIFIER ::= { enterprises 334 }
notes OBJECT IDENTIFIER ::= { lotus 72 }
notesPump OBJECT IDENTIFIER ::= { lotus 73 }
--Definitions of Notes main groups
lnInfo OBJECT IDENTIFIER ::= { notes 1 }
lnControl OBJECT IDENTIFIER ::= { notes 2 }
lnInterceptor OBJECT IDENTIFIER ::= { notes 3 }
lnUnix OBJECT IDENTIFIER ::= { notes 4 }
mpaInfo OBJECT IDENTIFIER ::= { notes 100 }
--Definitions of sub-groups of the lnInfo group
lnStats OBJECT IDENTIFIER ::= { lnInfo 1 }
--Definitions of sub-groups of the lnStats group
lnMail OBJECT IDENTIFIER ::= { lnStats 4 }
lnReplica OBJECT IDENTIFIER ::= { lnStats 5 }
lnServer OBJECT IDENTIFIER ::= { lnStats 6 }
lnComm OBJECT IDENTIFIER ::= { lnStats 7 }
lnDisk OBJECT IDENTIFIER ::= { lnStats 8 }
lnMem OBJECT IDENTIFIER ::= { lnStats 9 }
lnDatabase OBJECT IDENTIFIER ::= { lnStats 10 }
lnAgentMgr OBJECT IDENTIFIER ::= { lnStats 11 }
lnMTA OBJECT IDENTIFIER ::= { lnStats 12 }
lnWeb OBJECT IDENTIFIER ::= { lnStats 13 }
lnObject OBJECT IDENTIFIER ::= { lnStats 14 }
lnDomino OBJECT IDENTIFIER ::= { lnStats 15 }
lnCalendar OBJECT IDENTIFIER ::= { lnStats 16 }
lnCollector OBJECT IDENTIFIER ::= { lnStats 17 }
lnFT OBJECT IDENTIFIER ::= { lnStats 18 }
lnICM OBJECT IDENTIFIER ::= { lnStats 19 }
lnIMAP OBJECT IDENTIFIER ::= { lnStats 20 }
lnLDAP OBJECT IDENTIFIER ::= { lnStats 21 }
lnMailByDest OBJECT IDENTIFIER ::= { lnStats 22 }
lnMonitor OBJECT IDENTIFIER ::= { lnStats 23 }
lnNNTP OBJECT IDENTIFIER ::= { lnStats 24 }
lnPOP3 OBJECT IDENTIFIER ::= { lnStats 25 }
lnQOS OBJECT IDENTIFIER ::= { lnStats 26 }
lnReporter OBJECT IDENTIFIER ::= { lnStats 27 }
lnSem OBJECT IDENTIFIER ::= { lnStats 28 }
lnSMTP OBJECT IDENTIFIER ::= { lnStats 29 }
lnSMTPMTA OBJECT IDENTIFIER ::= { lnStats 30 }
lnSpin OBJECT IDENTIFIER ::= { lnStats 31 }
--Definitions of sub-groups of the lnServer group
lnServerTask OBJECT IDENTIFIER ::= { lnServer 1 }
lnServerInfo OBJECT IDENTIFIER ::= { lnServer 2 }
lnServerStats OBJECT IDENTIFIER ::= { lnServer 3 }
lnCluster OBJECT IDENTIFIER ::= { lnServer 4 }
--Definitions of sub-groups of the lnCluster group
lnOpenRedirects OBJECT IDENTIFIER ::= { lnCluster 8 }
lnOpenRequest OBJECT IDENTIFIER ::= { lnCluster 9 }
lnClusterTrans OBJECT IDENTIFIER ::= { lnCluster 10 }
--Definitions of sub-groups of the lnReplica group
lnReplicaCluster OBJECT IDENTIFIER ::= { lnReplica 6 }
--Definitions of sub-groups of the lnDomino group
lnDominoInfo OBJECT IDENTIFIER ::= { lnDomino 1 }
lnDominoCmdInfo OBJECT IDENTIFIER ::= { lnDomino 2 }
lnDominoConfig OBJECT IDENTIFIER ::= { lnDomino 3 }
--Define information provided by the Main Proxy Agent.
lnMainProxyAgentVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Information relevant to the Lotus Main SNMP Proxy Agent."
::= { mpaInfo 1 }
--The full (uninterpreted) statistics structure table
lnAllStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnAllStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing a one statistic per entry view of the
entire Notes server statistics structure."
::= { lnStats 1 }
lnAllStatsEntry OBJECT-TYPE
SYNTAX LnAllStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The entry type definition for the lnAllStatsTable."
INDEX { lnStatisticIndex }
::= { lnAllStatsTable 1 }
LnAllStatsEntry ::= SEQUENCE {
lnStatisticIndex INTEGER,
lnStatisticString DisplayString
}
lnStatisticIndex OBJECT-TYPE --<< INDEX *
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each statistic in the Notes server
statistics structure."
::= { lnAllStatsEntry 1 }
lnStatisticString OBJECT-TYPE --<< STRING *
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string describing one statistic from the Notes
Server statistics structure."
::= { lnAllStatsEntry 2 }
--Times related to statistics
lnStatsStartTime OBJECT-TYPE --<< TIME stats.time.start
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time and date at which the statistics agent was
last started. Represented as the number of seconds
since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnStats 2 }
lnStatsCurrentTime OBJECT-TYPE --<< TIME stats.time.current
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time and date of the last statistics update. Represented
as the number of seconds since midnight 1/1/70 GMT
(UNIX epoch)."
::= { lnStats 3 }
lnDeadMail OBJECT-TYPE --<< INT mail.dead
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of dead (undeliverable) mail messages."
::= { lnMail 1 }
lnDeliveredMail OBJECT-TYPE --<< INT mail.delivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messges received by router."
::= { lnMail 2 }
lnTotalMailFailures OBJECT-TYPE --<< INT mail.totalfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of routing failures since the server started."
::= { lnMail 3 }
lnTotalRoutedMail OBJECT-TYPE --<< INT mail.totalrouted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of mail messages routed since the server started."
::= { lnMail 4 }
lnTransferredMail OBJECT-TYPE --<< INT mail.transferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages router attempted to transfer."
::= { lnMail 5 }
lnWaitingMail OBJECT-TYPE --<< INT mail.waiting
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages waiting to be routed."
::= { lnMail 6 }
lnNumWaitingRecipients OBJECT-TYPE --<< INT mail.waitingrecipients
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of pending mail messages awaiting local delivery."
::= { lnMail 7 }
lnMailDomain OBJECT-TYPE --<< STRING mail.domain
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Notes server's mail domain."
::= { lnMail 8 }
lnAverageMailDeliverTime OBJECT-TYPE --<< INT mail.averagedelivertime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average time for mail delivery in seconds."
::= { lnMail 9 }
lnAverageMailServerHops OBJECT-TYPE --<< INT mail.averageserverhops
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average number of server hops for mail delivery."
::= { lnMail 10 }
lnAverageMailSizeDelivered OBJECT-TYPE --<< INT mail.averagesizedelivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average size of mail messages delivered in bytes."
::= { lnMail 11 }
lnMaximumMailDeliverTime OBJECT-TYPE --<< INT mail.maximumdelivertime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum time for mail delivery in seconds."
::= { lnMail 12 }
lnMaximumMailServerHops OBJECT-TYPE --<< INT mail.maximumserverhops
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of server hops for mail delivery."
::= { lnMail 13 }
lnMaximumMailSizeDelivered OBJECT-TYPE --<< INT mail.maximumsizedelivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum size of mail delivered in bytes."
::= { lnMail 14 }
lnMinimumMailDeliverTime OBJECT-TYPE --<< INT mail.minimumdelivertime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum time for mail delivery in seconds."
::= { lnMail 15 }
lnMinimumMailServerHops OBJECT-TYPE --<< INT mail.minimumserverhops
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum number of server hops for mail delivery."
::= { lnMail 16 }
lnMinimumMailSizeDelivered OBJECT-TYPE --<< INT mail.minimumsizedelivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum size of mail delivered in bytes."
::= { lnMail 17 }
lnTotalKBTransferred OBJECT-TYPE --<< INT mail.totalkbtransferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total mail transferred in kilobytes."
::= { lnMail 18 }
lnMailTransferFailures OBJECT-TYPE --<< INT mail.transferfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages the router was unable to transfer."
::= { lnMail 19 }
lnMailDeliveries OBJECT-TYPE --<< INT mail.deliveries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of actual mail items delivered (may be different from
delivered which counts individual messages)."
::= { lnMail 20 }
lnMailHold OBJECT-TYPE --<< INT mail.hold
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages in message queue on hold."
::= { lnMail 21 }
lnMailIMAPCacheMsgInsertAttempts OBJECT-TYPE --<< INT mail.imap.cache.msginsertattempts
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server attempts to insert message in cache."
::= { lnMail 22 }
lnMailIMAPFindCacheAttempted OBJECT-TYPE --<< INT mail.imap.findcacheattempted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of attempts by IMAP server to find message in cache."
::= { lnMail 23 }
lnMailIMAPNumCacheHits OBJECT-TYPE --<< INT mail.imap.numcachehits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages IMAP server found in cache."
::= { lnMail 24 }
lnMailIMAPNumMsgInsertedInCache OBJECT-TYPE --<< INT mail.imap.nummsginsertedincache
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages IMAP server inserted into Cache."
::= { lnMail 25 }
lnMailPeakByteTransferRate OBJECT-TYPE --<< INT mail.peakbytetransferrate
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak transfer rate."
::= { lnMail 26 }
lnMailPeakMessagesTransferred OBJECT-TYPE --<< INT mail.peakmessagestransferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of messages transferred."
::= { lnMail 27 }
lnMailPeakMessageTranferRate OBJECT-TYPE --<< INT mail.peakmessagetranferrate
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak message transfer rate."
::= { lnMail 28 }
lnMailPeakMessageTranferRateTime OBJECT-TYPE --<< TIME mail.peakmessagetranferrate.time
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time of peak message transfer rate."
::= { lnMail 29 }
lnMailPeakTotalBytesTransferred OBJECT-TYPE --<< INT mail.peaktotalbytestransfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Highest number of bytes transferred."
::= { lnMail 30 }
lnMailTotalPending OBJECT-TYPE --<< INT mail.totalpending
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages pending."
::= { lnMail 31 }
lnMailTotalRoutedSMTP OBJECT-TYPE --<< INT mail.totalrouted.smtp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages moved from MAIL.BOX via SMTP."
::= { lnMail 32 }
lnMailTotalRouterNRPC OBJECT-TYPE --<< INT mail.totalrouter.nrpc
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages moved from MAIL.BOX via NRPC."
::= { lnMail 33 }
lnMailWaitingforDNS OBJECT-TYPE --<< INT mail.waitingfordns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages in MAIL.BOX waiting for DNS."
::= { lnMail 34 }
lnRepDocsAdded OBJECT-TYPE --<< INT replica.docs.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of docs added via replication since server was started."
::= { lnReplica 1 }
lnRepDocsDeleted OBJECT-TYPE --<< INT replica.docs.deleted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of docs deleted via replication since server was started."
::= { lnReplica 2 }
lnRepDocsUpdated OBJECT-TYPE --<< INT replica.docs.updated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of docs updated via replication since server was started."
::= { lnReplica 3 }
lnRepFailed OBJECT-TYPE --<< INT replica.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of replications that generated an error."
::= { lnReplica 4 }
lnRepSuccessful OBJECT-TYPE --<< INT replica.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of successful replications."
::= { lnReplica 5 }
lnRepClusterDocsAdded OBJECT-TYPE --<< INT replica.cluster.docs.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of documents added by the cluster replicator."
::= { lnReplicaCluster 1 }
lnRepClusterDocsDeleted OBJECT-TYPE --<< INT replica.cluster.docs.deleted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of documents deleted by the cluster replicator."
::= { lnReplicaCluster 2 }
lnRepClusterDocsUpdated OBJECT-TYPE --<< INT replica.cluster.docs.updated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of documents updated by the cluster replicator."
::= { lnReplicaCluster 3 }
lnRepClusterFailed OBJECT-TYPE --<< INT replica.cluster.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of failed replications since server startup."
::= { lnReplicaCluster 4 }
lnRepClusterFilesLocal OBJECT-TYPE --<< INT replica.cluster.files.local
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases on the current server for which
there are replicas on other servers in the cluster."
::= { lnReplicaCluster 5 }
lnRepClusterFilesRemote OBJECT-TYPE --<< INT replica.cluster.files.remote
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases on other servers to which the
cluster replicator pushes changes."
::= { lnReplicaCluster 6 }
lnRepClusterRetrySkipped OBJECT-TYPE --<< INT replica.cluster.retry.skipped
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times the cluster replicator did not attempt
to replicate a database. The retry is skipped when the
destination server is known to be unreachable, or the database
is waiting for another retry attempt."
::= { lnReplicaCluster 7 }
lnRepClusterRetryWaiting OBJECT-TYPE --<< INT replica.cluster.retry.waiting
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of replicas that are waiting for retry attempts."
::= { lnReplicaCluster 8 }
lnRepClusterSecondsOnQueue OBJECT-TYPE --<< INT replica.cluster.secondsonqueue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The amount of time in seconds that the last database
replicated spent on the work queue."
::= { lnReplicaCluster 9 }
lnRepClusterSecondsOnQueueAvg OBJECT-TYPE --<< INT replica.cluster.secondsonqueue.avg
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The average amount of time in seconds that a database
spent on the work queue."
::= { lnReplicaCluster 10 }
lnRepClusterSecondsOnQueueMax OBJECT-TYPE --<< INT replica.cluster.secondsonqueue.max
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum amount of time in seconds that a database
spent on the work queue."
::= { lnReplicaCluster 11 }
lnRepClusterServers OBJECT-TYPE --<< INT replica.cluster.servers
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of other servers in the cluster that are receiving
replications from this server."
::= { lnReplicaCluster 12 }
lnRepClusterSessionBytesIn OBJECT-TYPE --<< INT replica.cluster.sessionbytes.in
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of bytes received during cluster replication."
::= { lnReplicaCluster 13 }
lnRepClusterSessionBytesOut OBJECT-TYPE --<< INT replica.cluster.sessionbytes.out
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of bytes sent during cluster replication."
::= { lnReplicaCluster 14 }
lnRepClusterSuccessful OBJECT-TYPE --<< INT replica.cluster.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of successful replications since server startup."
::= { lnReplicaCluster 15 }
lnRepClusterWorkQueueDepth OBJECT-TYPE --<< INT replica.cluster.workqueuedepth
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current number of databases awaiting replication by
the cluster replicator."
::= { lnReplicaCluster 16 }
lnRepClusterWorkQueueDepthAvg OBJECT-TYPE --<< INT replica.cluster.workqueuedepth.avg
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The average work queue depth since server startup."
::= { lnReplicaCluster 17 }
lnRepClusterWorkQueueDepthMax OBJECT-TYPE --<< INT replica.cluster.workqueuedepth.max
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum depth reached by the work queue since server startup."
::= { lnReplicaCluster 18 }
lnReplicaClusterCachedHandles OBJECT-TYPE --<< INT replica.cluster.cachedhandles
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of handles cached by cluster."
::= { lnReplicaCluster 19 }
lnTaskCount OBJECT-TYPE --<< INT server.tasks
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of Notes server tasks currently executing."
::= { lnServerTask 1 }
lnTaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnTaskEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each Notes server
task that is actually running."
::= { lnServerTask 2 }
lnTaskEntry OBJECT-TYPE
SYNTAX LnTaskEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnTaskTable."
INDEX { lnTaskIndex }
::= { lnTaskTable 1 }
LnTaskEntry ::= SEQUENCE {
lnTaskIndex INTEGER,
lnTaskType INTEGER,
lnTaskData DisplayString,
lnTaskName DisplayString
}
lnTaskIndex OBJECT-TYPE --<< INDEX server.task
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnTaskTable."
::= { lnTaskEntry 1 }
lnTaskType OBJECT-TYPE --<< TASKtype server.task
SYNTAX INTEGER {
databaseServer(1),
event(2),
reporter(3),
replicator(4),
indexer(5),
router(6),
eventInterceptor(7),
querySetHandler(8),
reflectorAgent(9),
webRetriever(10),
calendarConnector(11),
scheduleManager(12),
unknownAddin(13),
adminProcess(14),
httpWebServer(15),
chronos(16),
collector(17),
inotes(18),
billing(19),
clusterReplicator(20),
clusterDbDirMgr(21),
clusterAdmin(22),
agentManager(23),
cataloger(24),
databaseCompactor(25),
designer(26),
objectStoreMgr(27),
pop3Server(28),
statistics(29),
stats(30),
databaseFixup(31),
inNews(32),
webPublisher(33),
ccMailMTA(34),
smtpMTA(35),
x400MTA(36),
ldapServer(37),
nntpServer(38),
imapServer(39),
imap4Server(40)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The type of server task being represented by this entry."
::= { lnTaskEntry 2 }
lnTaskData OBJECT-TYPE --<< TASKdata server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Information associated with this task entry. See the
description for lnTaskType."
::= { lnTaskEntry 3 }
lnTaskName OBJECT-TYPE --<< TASKname server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The actual name of the task as it appears in the
SERVER.TASK statistic on the server."
::= { lnTaskEntry 4 }
lnReplicatorStatus OBJECT-TYPE --<< TASKreplicator server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of the Replicator task. Provided as a separate MIB
variable for the sake of efficiency."
::= { lnServerTask 3 }
lnRouterStatus OBJECT-TYPE --<< TASKrouter server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of the Router task. Provided as a separate MIB
variable for the sake of efficiency."
::= { lnServerTask 4 }
lnEventStatus OBJECT-TYPE --<< TASKevent server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of the Event task. Provided as a separate MIB
variable for the sake of efficiency."
::= { lnServerTask 5 }
lnServerName OBJECT-TYPE --<< STRING server.name
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Server Name."
::= { lnServerInfo 1 }
lnServerTitle OBJECT-TYPE --<< STRING server.title
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Title assigned to this server."
::= { lnServerInfo 2 }
lnServerAdministrators OBJECT-TYPE --<< STRING server.administrator
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Contents of Administrator field from server record in
Public Address book."
::= { lnServerInfo 3 }
lnServerNotesVersion OBJECT-TYPE --<< STRING server.version.notes
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Release of the Notes server that is running."
::= { lnServerInfo 4 }
lnServerSystemVersion OBJECT-TYPE --<< STRING server.version.os
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Release of the Operating System running on the server."
::= { lnServerInfo 5 }
lnServerBootID OBJECT-TYPE --<< INT server.bootid
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Unique number identifying the time this server was last booted."
::= { lnServerInfo 6 }
lnServerDataPath OBJECT-TYPE --<< STRING server.path.data
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Drive and directory defined as this server's data directory."
::= { lnServerInfo 7 }
lnServerSwapPath OBJECT-TYPE --<< STRING server.path.swap
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Drive and directory for this server's swap file
(NOTE: this stat relies on the NOTES.INI variable
'SWAPPATH' if config.sys contains a swap path
different from the default.)"
::= { lnServerInfo 8 }
lnServerRS232Ports OBJECT-TYPE --<< INT server.ports.rs232
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of RS232 ports on this server."
::= { lnServerInfo 9 }
lnServerCoprocessor OBJECT-TYPE --<< BOOL server.coprocessor
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Returns 'Yes', if server is a 486 or 386 w/ 387,
otherwise, Returns 'No'."
::= { lnServerInfo 10 }
lnServerOS OBJECT-TYPE -- Internally implemented.
SYNTAX INTEGER {
os2(1),
netWare(2),
windowsNT(3),
unix(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Operating System the current Notes server is running."
::= { lnServerInfo 11 }
lnServerCPUCount OBJECT-TYPE --<< INT server.cpu.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of processors installed on this server."
::= { lnServerInfo 12 }
lnServerCPUType OBJECT-TYPE --<< STRING server.cpu.type
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The type of processor installed on the server (386,486, Pentium, etc)."
::= { lnServerInfo 13 }
lnServerUsersTable OBJECT-TYPE -- Never implemented.
SYNTAX SEQUENCE OF LnServerUsersEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table containing one entry for each Notes user on the server."
::= { lnServerInfo 14 }
lnServerPorts OBJECT-TYPE --<< STRING server.ports
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A list of ports on the server."
::= { lnServerInfo 15 }
lnServerPoweredBy OBJECT-TYPE --<< STRING server.poweredby
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Indicates what is powering the Domino server. A value here
would indicate the system is running Release 4.5 or better
of the Domino server. Value should = Notes."
::= { lnServerInfo 16 }
lnServerDescription OBJECT-TYPE --<< STRING server.description
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Server's one line description from server's Name & Address book entry."
::= { lnServerInfo 17 }
lnServerLocation OBJECT-TYPE --<< STRING server.location
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Physical location of server."
::= { lnServerInfo 18 }
lnServerUsersEntry OBJECT-TYPE -- Never implemented.
SYNTAX LnServerUsersEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The entry type definition for the lnServerUsersTable."
INDEX { lnServerUsersIndex }
::= { lnServerUsersTable 1 }
LnServerUsersEntry ::= SEQUENCE {
lnServerUsersIndex INTEGER,
lnServerUserName DisplayString,
lnServerUserSessionID DisplayString,
lnServerUserAccessedDBs INTEGER
}
lnServerUsersIndex OBJECT-TYPE -- Never implemented.
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"A unique value for each entry in lnServerUsersTable."
::= { lnServerUsersEntry 1 }
lnServerUserName OBJECT-TYPE -- Never implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Notes UserName of server user."
::= { lnServerUsersEntry 2 }
lnServerUserSessionID OBJECT-TYPE -- Never implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The user's Notes session ID."
::= { lnServerUsersEntry 3 }
lnServerUserAccessedDBs OBJECT-TYPE -- Never implemented.
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of databases accessed by the users."
::= { lnServerUsersEntry 4 }
lnServerDroppedSessions OBJECT-TYPE --<< INT server.sessions.dropped
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of dropped sessions."
::= { lnServerStats 1 }
lnServerTransPerMin OBJECT-TYPE --<< INT server.trans.perminute
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average number of transactions per minute since the
server was started."
::= { lnServerStats 2 }
lnServerTransPerMinPeak OBJECT-TYPE --<< INT server.trans.perminute.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of transactions that took place in any
given minute since the server was started."
::= { lnServerStats 3 }
lnServerTransPerMinPeakTime OBJECT-TYPE --<< TIME server.trans.perminute.peak.time
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of transactions
per minute was last reached. Represented as the number
of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 4 }
lnServerTransTotal OBJECT-TYPE --<< INT server.trans.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of transactions the server has completed
since it was started."
::= { lnServerStats 5 }
lnServerUsers OBJECT-TYPE --<< INT server.users
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of users with sessions open on the server."
::= { lnServerStats 6 }
lnServerUsers1MinPeak OBJECT-TYPE --<< INT server.users.1minpeak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent users active within the last minute."
::= { lnServerStats 7 }
lnServerUsers1MinPeakTime OBJECT-TYPE --<< TIME server.users.1minpeaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of active concurrent
users were reached within the last minute. Represented as
the number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 8 }
lnServerUsers5MinPeak OBJECT-TYPE --<< INT server.users.5minpeak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent users that were active
within the last five minutes."
::= { lnServerStats 9 }
lnServerUsers5MinPeakTime OBJECT-TYPE --<< TIME server.users.5minpeaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of active concurrent
users were reached within the last five minutes. Represented
as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 10 }
lnServerUsersPeak OBJECT-TYPE --<< INT server.users.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent users with open sessions
since the server was started."
::= { lnServerStats 11 }
lnServerUsersPeakTime OBJECT-TYPE --<< TIME server.users.peak.time
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of concurrent users
with open sessions was last reached. Represented as the
number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 12 }
lnServerOpenReqMaxUsers OBJECT-TYPE --<< INT server.openrequest.maxusers
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times that a client has attempted to open
a database on this server when the server was at its
MAXUSERS limit."
::= { lnServerStats 13 }
lnServerOpenReqPreV4Client OBJECT-TYPE --<< INT server.openrequest.prev4client
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times Notes Release 4.0 (or higher)
clients have attempted to open a database on this server."
::= { lnServerStats 14 }
lnServerOpenReqRestricted OBJECT-TYPE --<< INT server.openrequest.restricted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times that a client has attempted to open
a database on this server when the server was RESTRICTED."
::= { lnServerStats 15 }
lnServerOpenReqV4Client OBJECT-TYPE --<< INT server.openrequest.v4client
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times Notes Clients post Release 4.0 have
attempted to open a database on this server."
::= { lnServerStats 16 }
lnServerBusyTimeQueryReceivedCount OBJECT-TYPE --<< INT server.busytimequery.receivedcount
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of external 'busytime' queries the server has received."
::= { lnServerStats 17 }
lnServerBusyTimeQueryRetObjSched OBJECT-TYPE --<< INT server.busytimequery.returned.objects.schedules
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of schedules that were returned by queries counted
by lnServerBusyTimeQueriesReceivedCount."
::= { lnServerStats 18 }
lnServerAvailabilityIndex OBJECT-TYPE --<< INT server.availabilityindex
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current percentage index of a server's availability. Value
range is 0-100. Zero (0) indicates no available resources;
a value of 100 indicates server completely available."
::= { lnServerStats 19 }
lnServerAvailabilityThreshold OBJECT-TYPE --<< INT server.availabilitythreshold
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current setting of a server's availability threshold. When
a server's availability index drops below its availability
threshold, the server becomes BUSY."
::= { lnServerStats 20 }
lnServerMinIdleDisconnect OBJECT-TYPE --<< INT server.minidledisconnect
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum number of minutes for disconnect."
::= { lnServerStats 21 }
lnServerMinIdleDisconnectTime OBJECT-TYPE --<< TIME server.minidledisconnect.time
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time at which minimum number of minutes for disconnect happened."
::= { lnServerStats 22 }
lnServerMonitorStart OBJECT-TYPE --<< TIME server.monitor.start
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time at which server monitor started."
::= { lnServerStats 23 }
lnServerTimeStart OBJECT-TYPE --<< TIME server.time.start
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time at which server was started."
::= { lnServerStats 24 }
lnServerWorkThreads OBJECT-TYPE --<< INT server.workthreads
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of concurrent transactions to create."
::= { lnServerStats 25 }
lnNumClosedOldSessions OBJECT-TYPE --<< INT comm.numoldsessionsclosed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of sessions dropped because of too many concurrent users."
::= { lnComm 1 }
lnNetbiosTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNetbiosEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each active NetBIOS
port on the server. Notes R3 only."
::= { lnComm 2 }
lnNetbiosEntry OBJECT-TYPE
SYNTAX LnNetbiosEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNetbiosTable, Notes R3."
INDEX { lnNBIndex }
::= { lnNetbiosTable 1 }
LnNetbiosEntry ::= SEQUENCE {
lnNBIndex INTEGER,
lnNBPort DisplayString,
lnNBUnitNumber INTEGER,
lnNBMajVersion INTEGER,
lnNMMinVersion INTEGER,
lnNBReportPeriod INTEGER,
lnNBInUseSessions INTEGER,
lnNBMaxSessions INTEGER,
lnNBAvailCmdBlocks INTEGER,
lnNBTotalCmdBlocks INTEGER,
lnNBPacketSize INTEGER,
lnNBReceivedPackets INTEGER,
lnNBSentPackets INTEGER,
lnNBAbortedTransmissions INTEGER,
lnNBRetriedTransmissions INTEGER,
lnNBAlignmentErrors INTEGER,
lnNBCollisionErrors INTEGER,
lnNBCRCErrors INTEGER,
lnNBReceiverResourcesExhausted INTEGER
}
lnNBIndex OBJECT-TYPE --<< INDEX netbios.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnNetbiosTable."
::= { lnNetbiosEntry 1 }
lnNBPort OBJECT-TYPE --<< NAME netbios.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"NetBIOS port associated with this table entry."
::= { lnNetbiosEntry 2 }
lnNBUnitNumber OBJECT-TYPE --<< INT netbios.*.unit.num
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Unit number for this NetBIOS port."
::= { lnNetbiosEntry 3 }
lnNBMajVersion OBJECT-TYPE --<< INT netbios.*.version.major
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Major version number of the NetBIOS driver being run on this port."
::= { lnNetbiosEntry 4 }
lnNMMinVersion OBJECT-TYPE --<< INT netbios.*.version.minor
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minor version number of the NetBIOS driver being run on this port."
::= { lnNetbiosEntry 5 }
lnNBReportPeriod OBJECT-TYPE --<< INT netbios.*.reportperiodminutes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Period of time over which the statistics for this port have
been accumulating."
::= { lnNetbiosEntry 6 }
lnNBInUseSessions OBJECT-TYPE --<< INT netbios.*.sessions.inuse
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NetBIOS sessions currently in use."
::= { lnNetbiosEntry 7 }
lnNBMaxSessions OBJECT-TYPE --<< INT netbios.*.sessions.maximum
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of concurrent NetBIOS sessions
configured for this port."
::= { lnNetbiosEntry 8 }
lnNBAvailCmdBlocks OBJECT-TYPE --<< INT netbios.*.commandblocks.available
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of NetBIOS command blocks which are
currently available for use."
::= { lnNetbiosEntry 9 }
lnNBTotalCmdBlocks OBJECT-TYPE --<< INT netbios.*.commandblocks.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of NetBIOS command blocks configured for this port."
::= { lnNetbiosEntry 10 }
lnNBPacketSize OBJECT-TYPE --<< INT netbios.*.session.datapacketsize
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Packet size for this NetBIOS port (in bytes)."
::= { lnNetbiosEntry 11 }
lnNBReceivedPackets OBJECT-TYPE --<< INT netbios.*.packets.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of packets received by this port."
::= { lnNetbiosEntry 12 }
lnNBSentPackets OBJECT-TYPE --<< INT netbios.*.packets.transmitted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of packets sent from this port."
::= { lnNetbiosEntry 13 }
lnNBAbortedTransmissions OBJECT-TYPE --<< INT netbios.*.transmissions.aborted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of aborted transmissions for this port."
::= { lnNetbiosEntry 14 }
lnNBRetriedTransmissions OBJECT-TYPE --<< INT netbios.*.transmissions.retried
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retried transmissions for this port."
::= { lnNetbiosEntry 15 }
lnNBAlignmentErrors OBJECT-TYPE --<< INT netbios.*.errors.alignment
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of alignment errors for this port."
::= { lnNetbiosEntry 16 }
lnNBCollisionErrors OBJECT-TYPE --<< INT netbios.*.errors.collisions
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of collision errors for this port."
::= { lnNetbiosEntry 17 }
lnNBCRCErrors OBJECT-TYPE --<< INT netbios.*.errors.crc
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of checksum errors for this port."
::= { lnNetbiosEntry 18 }
lnNBReceiverResourcesExhausted OBJECT-TYPE --<< INT netbios.*.receiver.resources.exhausted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of exhausted NetBios resources."
::= { lnNetbiosEntry 19 }
lnXPCTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnXPCEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each active XPC port on the server."
::= { lnComm 3 }
lnXPCEntry OBJECT-TYPE
SYNTAX LnXPCEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnXPCTable."
INDEX { lnXPCIndex }
::= { lnXPCTable 1 }
LnXPCEntry ::= SEQUENCE {
lnXPCIndex INTEGER,
lnXPCPort DisplayString,
lnXPCStatus DisplayString,
lnXPCCarrierSpeed INTEGER,
lnXPCPortSpeed INTEGER,
lnXPCActiveSessions INTEGER,
lnXPCKiloBytesReceived INTEGER,
lnXPCKiloBytesSent INTEGER,
lnXPCMsgsReceived INTEGER,
lnXPCMsgsSent INTEGER,
lnXPCCRCErrors INTEGER,
lnXPCPortErrors INTEGER,
lnXPCRetransmissions INTEGER
}
lnXPCIndex OBJECT-TYPE --<< INDEX xpc.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnXPCTable."
::= { lnXPCEntry 1 }
lnXPCPort OBJECT-TYPE --<< NAME xpc.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"XPC port associated with this table entry."
::= { lnXPCEntry 2 }
lnXPCStatus OBJECT-TYPE --<< STRING xpc.*.status
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The status of this XPC port."
::= { lnXPCEntry 3 }
lnXPCCarrierSpeed OBJECT-TYPE --<< INT xpc.*.speed.carrier
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Communication speed (in bits per second) between
local modem and remote modem."
::= { lnXPCEntry 4 }
lnXPCPortSpeed OBJECT-TYPE --<< INT xpc.*.speed.port
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Communication speed (in bits per second) between
server and local modem."
::= { lnXPCEntry 5 }
lnXPCActiveSessions OBJECT-TYPE --<< INT xpc.*.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of active user sessions on this XPC port."
::= { lnXPCEntry 6 }
lnXPCKiloBytesReceived OBJECT-TYPE --<< INT xpc.*.userbytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of kilobytes received by this port."
::= { lnXPCEntry 7 }
lnXPCKiloBytesSent OBJECT-TYPE --<< INT xpc.*.userbytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of kilobytes sent by this port."
::= { lnXPCEntry 8 }
lnXPCMsgsReceived OBJECT-TYPE --<< INT xpc.*.usermsgs.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages received by this port."
::= { lnXPCEntry 9 }
lnXPCMsgsSent OBJECT-TYPE --<< INT xpc.*.usermsgs.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages sent by this port."
::= { lnXPCEntry 10 }
lnXPCCRCErrors OBJECT-TYPE --<< INT xpc.*.errors.crc
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of checksum errors from this port."
::= { lnXPCEntry 11 }
lnXPCPortErrors OBJECT-TYPE --<< INT xpc.*.errors.port
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of port errors."
::= { lnXPCEntry 12 }
lnXPCRetransmissions OBJECT-TYPE --<< INT xpc.*.errors.retransmittedpackets
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retransmissions from this port."
::= { lnXPCEntry 13 }
lnAppleTalkStatsLogged OBJECT-TYPE --<< INT comm.appletalk.appletalk.statslogged
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of AppleTalk statistics logged by the Notes server."
::= { lnComm 4 }
lnNetWareSPXIIStatsLogged OBJECT-TYPE --<< INT comm.netware.spxii.statslogged
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NetWare SPX II statistics logged by the Notes server."
::= { lnComm 5 }
lnNetPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNetPortEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each configured Notes network
port on the server. This table is new to the MIB as of Notes
Release 4. This table replaces most of the lnComm variables,
remaining for backward compatibility, found in Release 3 of Notes."
::= { lnComm 6 }
lnNetPortEntry OBJECT-TYPE
SYNTAX LnNetPortEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNetPortTable.
This is specific to Notes Release 4."
INDEX { lnNetPortIndex }
::= { lnNetPortTable 1 }
LnNetPortEntry ::= SEQUENCE {
lnNetPortIndex INTEGER,
lnNetPortName DisplayString,
lnNetPortKBytesRec INTEGER,
lnNetPortKBytesSent INTEGER,
lnNetPortSessEstIn INTEGER,
lnNetPortSessEstOut INTEGER,
lnNetPortSessLimit INTEGER,
lnNetPortSessLimitMax INTEGER,
lnNetPortSessLimitMin INTEGER,
lnNetPortSessPeak INTEGER,
lnNetPortSessRecycled INTEGER,
lnNetPortSessRecycling INTEGER,
lnSNARemoteLU INTEGER,
lnSNALocalLU INTEGER,
lnSNALNCVersion INTEGER,
lnSNAVersion INTEGER,
lnSNAMaxSessions INTEGER,
lnSNAActiveSessions INTEGER,
lnSNATPType INTEGER,
lnSNATPState INTEGER,
lnSNAConversationId INTEGER,
lnSNAMaxSendRUSize INTEGER,
lnSNAMaxRcvRUSize INTEGER,
lnSNASendPacingSize INTEGER,
lnSNARcvPacingSize INTEGER,
lnSNAPacingType INTEGER,
lnX25LocalResets INTEGER,
lnX25RemoteResets INTEGER,
lnX25WindowSize INTEGER,
lnX25FrameSize INTEGER,
lnX25PktSize INTEGER,
lnX25UnderRuns INTEGER,
lnX25OverRuns INTEGER,
lnX25REJTran INTEGER,
lnX25REJRcv INTEGER,
lnX25VCCfg INTEGER,
lnX25VCInUse INTEGER,
lnX25CRCErrors INTEGER,
lnX25LocalDTEAddress INTEGER
}
lnNetPortIndex OBJECT-TYPE --<< INDEX net.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnPortTable."
::= { lnNetPortEntry 1 }
lnNetPortName OBJECT-TYPE --<< NAME net.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The port name associate with this entry."
::= { lnNetPortEntry 2 }
lnNetPortKBytesRec OBJECT-TYPE --<< KINT net.*.bytesreceived
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes received on this port.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnNetPortEntry 3 }
lnNetPortKBytesSent OBJECT-TYPE --<< KINT net.*.bytessent
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes sent on this port.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnNetPortEntry 4 }
lnNetPortSessEstIn OBJECT-TYPE --<< INT net.*.sessions.established.incoming
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of inbound sessions established on this port."
::= { lnNetPortEntry 5 }
lnNetPortSessEstOut OBJECT-TYPE --<< INT net.*.sessions.established.outgoing
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of outbound sessions established on this port."
::= { lnNetPortEntry 6 }
lnNetPortSessLimit OBJECT-TYPE --<< INT net.*.sessions.limit
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current limit on the number of concurrent sessions on the port."
::= { lnNetPortEntry 7 }
lnNetPortSessLimitMax OBJECT-TYPE --<< INT net.*.sessions.limitmax
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Upward boundary of the range in which lnPortSessLimit may vary."
::= { lnNetPortEntry 8 }
lnNetPortSessLimitMin OBJECT-TYPE --<< INT net.*.sessions.limitmin
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Lower boundary of the range in which lnPortSessLimit may vary."
::= { lnNetPortEntry 9 }
lnNetPortSessPeak OBJECT-TYPE --<< INT net.*.sessions.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent sessions on this port."
::= { lnNetPortEntry 10 }
lnNetPortSessRecycled OBJECT-TYPE --<< INT net.*.sessions.recycled
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of dropped sessions due to low network resources."
::= { lnNetPortEntry 11 }
lnNetPortSessRecycling OBJECT-TYPE --<< INT net.*.sessions.recycling
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of sessions currently being dropped due to low
network resources."
::= { lnNetPortEntry 12 }
lnSNARemoteLU OBJECT-TYPE --<< INT net.*.remotelu
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Remote LU."
::= { lnNetPortEntry 13 }
lnSNALocalLU OBJECT-TYPE --<< INT net.*.locallu
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Local LU."
::= { lnNetPortEntry 14 }
lnSNALNCVersion OBJECT-TYPE --<< INT net.*.lncversion
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA LNC Version."
::= { lnNetPortEntry 15 }
lnSNAVersion OBJECT-TYPE --<< INT net.*.version
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA Version."
::= { lnNetPortEntry 16 }
lnSNAMaxSessions OBJECT-TYPE --<< INT net.*.maxsessions
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of SNA sessions that can exist."
::= { lnNetPortEntry 17 }
lnSNAActiveSessions OBJECT-TYPE --<< INT net.*.activesessions
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of active SNA sessions."
::= { lnNetPortEntry 18 }
lnSNATPType OBJECT-TYPE --<< INT net.*.tptype
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA transaction program type."
::= { lnNetPortEntry 19 }
lnSNATPState OBJECT-TYPE --<< INT net.*.tpstate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA transaction program state."
::= { lnNetPortEntry 20 }
lnSNAConversationId OBJECT-TYPE --<< INT net.*.conversationid
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA conversation ID."
::= { lnNetPortEntry 21 }
lnSNAMaxSendRUSize OBJECT-TYPE --<< INT net.*.maxsendrusize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum send request unit size sent."
::= { lnNetPortEntry 22 }
lnSNAMaxRcvRUSize OBJECT-TYPE --<< INT net.*.maxrcvrusize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum send request unit size received."
::= { lnNetPortEntry 23 }
lnSNASendPacingSize OBJECT-TYPE --<< INT net.*.sendpacingsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of outstanding request units which can
be transmitted before receiving a pacing response from the
remote LU."
::= { lnNetPortEntry 24 }
lnSNARcvPacingSize OBJECT-TYPE --<< INT net.*.rcvcpacingsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of oustanding request units which can
be received before transmitting a pacing response to the
remote LU."
::= { lnNetPortEntry 25 }
lnSNAPacingType OBJECT-TYPE --<< INT net.*.pacingtype
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The SNA pacing size was originally determined at the creation
of a session and remained constant through the life of the
session. More recent implementations allow the pacing size
to dynamically change through the life of the session to increase
efficiency and take advantage of available buffers. This number
represents the type of pacing done."
::= { lnNetPortEntry 26 }
lnX25LocalResets OBJECT-TYPE --<< INT net.*.localresets
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of local resets on this X25 port."
::= { lnNetPortEntry 27 }
lnX25RemoteResets OBJECT-TYPE --<< INT net.*.remoteresets
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of remote resets on this X25 port."
::= { lnNetPortEntry 28 }
lnX25WindowSize OBJECT-TYPE --<< INT net.*.windowsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The window size on this X25 port."
::= { lnNetPortEntry 29 }
lnX25FrameSize OBJECT-TYPE --<< INT net.*.framesize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The network frame size on this X25 port."
::= { lnNetPortEntry 30 }
lnX25PktSize OBJECT-TYPE --<< INT net.*.pktsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The network packet size on this X25 port."
::= { lnNetPortEntry 31 }
lnX25UnderRuns OBJECT-TYPE --<< INT net.*.underruns
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This occurs when data is not given to the UART on an X.25 board
fast enough for it to generate a complete packet on the wire."
::= { lnNetPortEntry 32 }
lnX25OverRuns OBJECT-TYPE --<< INT net.*.overruns
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This occurs when data is given to the UART on an X.25 board
faster than the board can generate packets to put on the wire."
::= { lnNetPortEntry 33 }
lnX25REJTran OBJECT-TYPE --<< INT net.*.rejtran
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of REJs transmitted by this X25 port."
::= { lnNetPortEntry 34 }
lnX25REJRcv OBJECT-TYPE --<< INT net.*.rejrcv
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of REJs received by this X25 port."
::= { lnNetPortEntry 35 }
lnX25VCCfg OBJECT-TYPE --<< INT net.*.vccfg
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of virtual circuits configured on this X25 port."
::= { lnNetPortEntry 36 }
lnX25VCInUse OBJECT-TYPE --<< INT net.*.vcinuse
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of virtual circuits currently in use on this X25 port."
::= { lnNetPortEntry 37 }
lnX25CRCErrors OBJECT-TYPE --<< INT net.*.crcerrors
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The remote DTE address on this X25 port."
::= { lnNetPortEntry 38 }
lnX25LocalDTEAddress OBJECT-TYPE --<< INT net.*.localdteaddress
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The local DTE address on this X25 port."
::= { lnNetPortEntry 39 }
lnNetLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNetLogEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about unwritten log notes."
::= { lnComm 7 }
lnNetLogEntry OBJECT-TYPE
SYNTAX LnNetLogEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNetLogTable."
INDEX { lnNetLogIndex }
::= { lnNetLogTable 1 }
LnNetLogEntry ::= SEQUENCE {
lnNetLogIndex INTEGER,
lnNetLogName DisplayString,
lnNETLogUnwrittenEntries INTEGER
}
lnNetLogIndex OBJECT-TYPE --<< INDEX net.log.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnNetLogTable."
::= { lnNetLogEntry 1 }
lnNetLogName OBJECT-TYPE --<< NAME net.log.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the user."
::= { lnNetLogEntry 2 }
lnNETLogUnwrittenEntries OBJECT-TYPE --<< INT net.log.*.unwrittenentries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of unwritten log notes waiting to be written."
::= { lnNetLogEntry 3 }
lnDiskFixed OBJECT-TYPE --<< INT disk.fixed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of fixed disks configured on this server."
::= { lnDisk 1 }
lnDiskFreeSwap OBJECT-TYPE --<< INT disk.swapdisk.free
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Amount of free space left in swap area (in kilobytes)."
::= { lnDisk 2 }
lnDriveTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnDriveEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each disk (including
network disks) configured on the server."
::= { lnDisk 3 }
lnDiskRemote OBJECT-TYPE --<< INT disk.remote
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of network disks or volumes mounted."
::= { lnDisk 4 }
lnDriveEntry OBJECT-TYPE
SYNTAX LnDriveEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnDriveTable."
INDEX { lnDriveIndex }
::= { lnDriveTable 1 }
LnDriveEntry ::= SEQUENCE {
lnDriveIndex INTEGER,
lnDriveLetter DisplayString,
lnDriveSize INTEGER,
lnDriveFree INTEGER
}
lnDriveIndex OBJECT-TYPE --<< INDEX disk.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnDriveTable."
::= { lnDriveEntry 1 }
lnDriveLetter OBJECT-TYPE --<< NAME disk.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The drive letter of the disk associated with this entry."
::= { lnDriveEntry 2 }
lnDriveSize OBJECT-TYPE --<< KINT disk.*.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total size of this drive in kilobytes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDriveEntry 3 }
lnDriveFree OBJECT-TYPE --<< KINT disk.*.free
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The amount of free space left on this drive in kilobytes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDriveEntry 4 }
lnMemAllocTotal OBJECT-TYPE --<< INT mem.allocated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total memory allocated (should be sum of process and shared)."
::= { lnMem 1 }
lnMemAllocProcess OBJECT-TYPE --<< INT mem.allocated.process
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total process-private memory allocated by all
currently-running processes."
::= { lnMem 2 }
lnMemAllocShared OBJECT-TYPE --<< INT mem.allocated.shared
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total shared memory allocated."
::= { lnMem 3 }
lnMemAvailability OBJECT-TYPE --<< STRING mem.availability
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Available memory on this server."
::= { lnMem 4 }
lnMemFree OBJECT-TYPE --<< KINT mem.free
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total free memory, reported in kilobytes, as shown
in the MEM.FREE Notes statistic.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnMem 5 }
lnMemSwapSize OBJECT-TYPE --<< INT mem.swapfile.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of swap file (NOTE: this stat relies on the NOTES.INI
variable 'SWAPPATH' if config.sys contains a swap
path different from the default.)"
::= { lnMem 6 }
lnMemPhysicalRAM OBJECT-TYPE --<< INT mem.physicalram
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total amount of physical memory on the server."
::= { lnMem 7 }
lnMemFTVDKMaxBufferSizeUsed OBJECT-TYPE --<< INT mem.ftvdkmaxbuffersizeused
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"FTVDK Max buffer size used."
::= { lnMem 8 }
lnMemQuota OBJECT-TYPE --<< INT mem.quota
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum memory that can be allocated by the server."
::= { lnMem 9 }
lnMemTimeouts OBJECT-TYPE --<< STRING mem.timeouts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Memory timeouts."
::= { lnMem 10 }
lnDBBufferControlPoolSize OBJECT-TYPE --<< INT database.buffercontrolpool.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of the buffer control pool."
::= { lnDatabase 1 }
lnDBBufferControlPoolUsed OBJECT-TYPE --<< INT database.buffercontrolpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes used in buffer control pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 2 }
lnDBBufferPoolAllocated OBJECT-TYPE --<< INT database.bufferpool.allocated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes allocated from the buffer pool."
::= { lnDatabase 3 }
lnDBBufferPoolMaximum OBJECT-TYPE --<< INT database.bufferpool.maximum
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum size of the buffer pool."
::= { lnDatabase 4 }
lnDBBufferPoolUsed OBJECT-TYPE --<< INT database.bufferpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of used buffers from the buffer pool."
::= { lnDatabase 5 }
lnDBNSFPoolSize OBJECT-TYPE --<< INT database.nsfpool.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of NSF pool."
::= { lnDatabase 6 }
lnDBNSFPoolUsed OBJECT-TYPE --<< INT database.nsfpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Amount of space used in NSF pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 7 }
lnDBBufferPoolPercentReadsInBuffer OBJECT-TYPE --<< INT database.bufferpool.percentreadsinbuffer
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Percentage of buffer pool reads."
::= { lnDatabase 8 }
lnDBBufferPoolReads OBJECT-TYPE --<< INT database.bufferpool.reads
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database buffer pool reads."
::= { lnDatabase 9 }
lnDBBufferPoolWrites OBJECT-TYPE --<< INT database.bufferpool.writes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database buffer pool writes."
::= { lnDatabase 10 }
lnDBNIFPoolSize OBJECT-TYPE --<< INT database.nifpool.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of database NIF pool."
::= { lnDatabase 11 }
lnDBNIFPoolUsed OBJECT-TYPE --<< INT database.nifpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database NIF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 12 }
lnDBNIFPoolPeak OBJECT-TYPE --<< INT database.nifpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of database NIF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 13 }
lnDBNSFPoolPeak OBJECT-TYPE --<< INT database.nsfpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of database NSF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 14 }
lnDBCacheCurrentEntries OBJECT-TYPE --<< INT database.dbcache.currententries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases currently in the cache. Administrators
should monitor this number to see whether it approaches the
NSF_DBCACHE_MAXENTRIES setting. If it does, this indicates
the cache is under pressure. If this situation
occurs frequently, the administrator should increase the setting for
NSF_DBCACHE_MAXENTRIES."
::= { lnDatabase 15 }
lnDBCacheHighWaterMark OBJECT-TYPE --<< INT database.dbcache.highwatermark
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of databases in the cache during this
running of the Domino server program. Note that this number
may be artificially high due to startup activity, so it may
be of limited use as a genuine indicator of cache performance."
::= { lnDatabase 16 }
lnDBCacheHits OBJECT-TYPE --<< INT database.dbcache.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times an lnDBCacheInitialDbOpen is satisfied by
finding a database in the cache. A high 'hits-to-opens' ratio
indicates the database cache is working effectively, since
most users are opening databases in the cache without having
to wait for the usual time required by an initial (non-cache)
open. If the ratio is low (in other words, more users are
having to wait for databases not in the cache to open), the
administrator can increase the NSF_DBCACHE_MAXENTRIES
settings."
::= { lnDatabase 17 }
lnDBCacheInitialDbOpens OBJECT-TYPE --<< INT database.dbcache.initialdbopens
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a user/server opened a database that was
not already being used by another user/server. By comparing
this number to lnDBCacheHits, administrators can gauge the
effectiveness of the cache."
::= { lnDatabase 18 }
lnDBCacheLookups OBJECT-TYPE --<< INT database.dbcache.lookups
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of lookups performed on the cache."
::= { lnDatabase 19 }
lnDBCacheMaxEntries OBJECT-TYPE --<< INT database.dbcache.maxentries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases that the server can currently
hold in its cache at once."
::= { lnDatabase 20 }
lnDBCacheOvercrowdingRejections OBJECT-TYPE --<< INT database.dbcache.overcrowdingrejections
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a database is not placed into the
cache when it is closed because lnDBCacheCurrentEntries equals
or exceeds lnDBCacheMaxEntries*1.5. This number should stay
low. If it begins to rise, you should increase the
NSF_DbCache_Maxentries settings."
::= { lnDatabase 21 }
lnDBBufferControlPoolPeak OBJECT-TYPE --<< INT database.buffercontrolpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak size of buffer control pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 22 }
lnDBBufferPoolPeak OBJECT-TYPE --<< INT database.bufferpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of database buffer pools."
::= { lnDatabase 23 }
lnDBExtMgrPoolPeak OBJECT-TYPE --<< INT database.extmgrpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of external manager pools."
::= { lnDatabase 24 }
lnDBExtMgrPoolUsed OBJECT-TYPE --<< INT database.extmgrpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of External Manager pools."
::= { lnDatabase 25 }
lnDBNSFFreeHandleStackHits OBJECT-TYPE --<< INT database.nsf.freehandlestack.freehandlestackhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of free handle stack hits."
::= { lnDatabase 26 }
lnDBNSFFreeHandleStackAllocations OBJECT-TYPE --<< INT database.nsf.freehandlestack.handleallocations
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database free handle stack allocations."
::= { lnDatabase 27 }
lnDBNSFFreeHandleStackMissRate OBJECT-TYPE --<< INT database.nsf.freehandlestack.missrate
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Free handle stack miss rate."
::= { lnDatabase 28 }
lnDailyAccessDenials OBJECT-TYPE --<< INT agent.daily.accessdenials
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times the agent manager failed to execute
a given task, probably due to ACL restrictions."
::= { lnAgentMgr 1 }
lnDailyScheduledRuns OBJECT-TYPE --<< INT agent.daily.scheduledruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks that the agent manager has scheduled
to run during the course of the day."
::= { lnAgentMgr 2 }
lnDailyTriggeredRuns OBJECT-TYPE --<< INT agent.daily.triggeredruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks that the agent manager has had triggered
to run by an event during the course of the day."
::= { lnAgentMgr 3 }
lnDailyUnsuccessfulRuns OBJECT-TYPE --<< INT agent.daily.unsuccessfulruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has unsuccessfully
run during the course of the day."
::= { lnAgentMgr 4 }
lnDailyUsedRunTime OBJECT-TYPE --<< STRING agent.daily.usedruntime
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of seconds used to run an agent."
::= { lnAgentMgr 5 }
lnHourlyAccessDenials OBJECT-TYPE --<< INT agent.hourly.accessdenials
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks that the agent manager failed to
execute during the last hour, probably due to ACL restrictions."
::= { lnAgentMgr 6 }
lnHourlyScheduledRuns OBJECT-TYPE --<< INT agent.hourly.scheduledruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has scheduled to
run during the last hour."
::= { lnAgentMgr 7 }
lnHourlyTriggeredRuns OBJECT-TYPE --<< INT agent.hourly.triggeredruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has had triggered to
run by an event during the last hour."
::= { lnAgentMgr 8 }
lnHourlyUnsuccessfulRuns OBJECT-TYPE --<< INT agent.hourly.unsuccessfulruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has unsuccessfully
run during the last hour."
::= { lnAgentMgr 9 }
lnHourlyUsedRunTime OBJECT-TYPE --<< STRING agent.hourly.usedruntime
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of seconds to run an agent."
::= { lnAgentMgr 10 }
lnMTATable OBJECT-TYPE
SYNTAX SEQUENCE OF LnMTAEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each running Notes server MTA."
::= { lnMTA 1 }
lnMTAEntry OBJECT-TYPE
SYNTAX LnMTAEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnMTATable."
INDEX { lnMTAIndex }
::= { lnMTATable 1 }
LnMTAEntry ::= SEQUENCE {
lnMTAIndex INTEGER,
lnMTAName DisplayString,
lnMTADeadMsgs INTEGER,
lnMTAWaitingRecp INTEGER,
lnMTAWaitingMsgs INTEGER,
lnMTATransferFailures INTEGER,
lnMTATotalKBTransferred INTEGER,
lnMTATransferredMsgs INTEGER,
lnMTATotalRouted INTEGER
}
lnMTAIndex OBJECT-TYPE --<< INDEX mta.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each MTA running on the Notes server."
::= { lnMTAEntry 1 }
lnMTAName OBJECT-TYPE --<< NAME mta.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A string representing the name of a MTA running on the Notes server."
::= { lnMTAEntry 2 }
lnMTADeadMsgs OBJECT-TYPE --<< INT mta.*.dead
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of dead mail messages. (Messages that are stuck
in the MTA queue.)"
::= { lnMTAEntry 3 }
lnMTAWaitingRecp OBJECT-TYPE --<< INT mta.*.waitingrecipients
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of recipients for pending mail. (The number of
recipients responsible for lnMTAWaitingMsgs.)"
::= { lnMTAEntry 4 }
lnMTAWaitingMsgs OBJECT-TYPE --<< INT mta.*.waiting
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The amount of mail awaiting routing. (The number of messages
that are in the process of being routed.)"
::= { lnMTAEntry 5 }
lnMTATransferFailures OBJECT-TYPE --<< INT mta.*.transferfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of messages the MTA could not transfer."
::= { lnMTAEntry 6 }
lnMTATotalKBTransferred OBJECT-TYPE --<< INT mta.*.totalkbtransferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of kilobyte transferred outbound
or into any of the .box's by this MTA."
::= { lnMTAEntry 7 }
lnMTATransferredMsgs OBJECT-TYPE --<< INT mta.*.transferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of messages transferred outbound or
into any of the .box's by this MTA."
::= { lnMTAEntry 8 }
lnMTATotalRouted OBJECT-TYPE --<< INT mta.*.totalrouted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total amount of mail routed (# of recipients routed to)
outbound or into any of the .box's."
::= { lnMTAEntry 9 }
lnWebAccessFtp OBJECT-TYPE --<< INT web.retriever.access.ftp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of FTP connections on this Web server."
::= { lnWeb 1 }
lnWebAccessGopher OBJECT-TYPE --<< INT web.retriever.access.gopher
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Gopher connections on this Web server."
::= { lnWeb 2 }
lnWebAccessHttp OBJECT-TYPE --<< INT web.retriever.access.http
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of HTTP connections on this Web server."
::= { lnWeb 3 }
lnWebKBytesReceived OBJECT-TYPE --<< KINT web.retriever.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes received by this Web server."
::= { lnWeb 4 }
lnWebKBytesSent OBJECT-TYPE --<< KINT web.retriever.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes sent by this Web server."
::= { lnWeb 5 }
lnWebImageCacheHits OBJECT-TYPE --<< INT web.retriever.imagecache.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of successful hits on the image cache."
::= { lnWeb 6 }
lnWebImageCacheMisses OBJECT-TYPE --<< INT web.retriever.imagecache.misses
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of image cache misses."
::= { lnWeb 7 }
lnWebLogMessages OBJECT-TYPE --<< STRING web.retriever.logmessages
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
" 'Yes' if message logging is turned on."
::= { lnWeb 8 }
lnWebActiveProcesses OBJECT-TYPE --<< INT web.retriever.process.num.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of active Web Retriever processes."
::= { lnWeb 9 }
lnWebBusyProcesses OBJECT-TYPE --<< INT web.retriever.process.num.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Web Retriever processes currently busy working."
::= { lnWeb 10 }
lnWebIdleProcesses OBJECT-TYPE --<< INT web.retriever.process.num.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Web Retriever processes that are sitting idle."
::= { lnWeb 11 }
lnWebMaxProcesses OBJECT-TYPE --<< INT web.retriever.process.num.maximum
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of Web Retriever processes allowable on this server."
::= { lnWeb 12 }
lnWebProcessState OBJECT-TYPE --<< STRING web.retriever.process.state
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of image cache misses."
::= { lnWeb 13 }
lnWebTimeCurrent OBJECT-TYPE --<< STRING web.retriever.time.current
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The current time, as set on this Web Retriever."
::= { lnWeb 14 }
lnWebTimeDuration OBJECT-TYPE --<< STRING web.retriever.time.duration
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Shows the amount of time this Web Retriever has been running."
::= { lnWeb 15 }
lnWebTimeStart OBJECT-TYPE --<< STRING web.retriever.time.start
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The time the Web Retriever processes started."
::= { lnWeb 16 }
lnWebUrlFail OBJECT-TYPE --<< INT web.retriever.urls.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number URL requests that have failed on this Web Retriever."
::= { lnWeb 17 }
lnWebUrlRequested OBJECT-TYPE --<< INT web.retriever.urls.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of URL requests on this Web Retriever."
::= { lnWeb 18 }
lnWebUrlSucceeded OBJECT-TYPE --<< INT web.retriever.urls.succeeded
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL requests successfully completed on this server."
::= { lnWeb 19 }
lnWebRetrieverVersion OBJECT-TYPE --<< STRING web.retriever.version
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The version of the Web Retriever software that is running."
::= { lnWeb 20 }
lnWebVpoolMaxBuf OBJECT-TYPE --<< INT web.retriever.vpool.max.buf
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of buffer VPOOLs which have reached maximum size."
::= { lnWeb 21 }
lnWebVpoolMaxElement OBJECT-TYPE --<< INT web.retriever.vpool.max.element
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of element VPOOLs which have reached maximum size."
::= { lnWeb 22 }
lnWebVpoolMaxMarker OBJECT-TYPE --<< INT web.retriever.vpool.max.marker
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of marker VPOOLs which have reached maximum size."
::= { lnWeb 23 }
lnWebVpoolMaxText OBJECT-TYPE --<< INT web.retriever.vpool.max.text
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of text VPOOLs which have reached maximum size."
::= { lnWeb 24 }
lnWebVpoolMaxUrl OBJECT-TYPE --<< INT web.retriever.vpool.max.url
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL VPOOLs which have reached maximum size."
::= { lnWeb 25 }
lnWebProcTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnWebProcEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This table will show statistics for all Web Retriever
processes on the server."
::= { lnWeb 26 }
lnWebRetrieverLogLevel OBJECT-TYPE --<< STRING web.retriever.loglevel
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Web retriever logging Level."
::= { lnWeb 27 }
lnWebRetrieverProcessAccessFTP OBJECT-TYPE --<< INT web.retriever.process.access.ftp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retriever process FTP accesses."
::= { lnWeb 28 }
lnWebRetrieverProcessAccessGopher OBJECT-TYPE --<< INT web.retriever.process.access.gopher
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retriever process Gopher accesses."
::= { lnWeb 29 }
lnWebRetrieverProcessAccessHTTP OBJECT-TYPE --<< INT web.retriever.process.access.http
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retriever process HTTP accesses."
::= { lnWeb 30 }
lnWebRetrieverProcessBytesReceived OBJECT-TYPE --<< INT web.retriever.process.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes received by retriever process."
::= { lnWeb 31 }
lnWebRetrieverProcessBytesSent OBJECT-TYPE --<< INT web.retriever.process.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes sent by retriever process."
::= { lnWeb 32 }
lnWebRetrieverProcessProcessID OBJECT-TYPE --<< INT web.retriever.process.processid
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Process id number."
::= { lnWeb 33 }
lnWebRetrieverProcessURLsFailed OBJECT-TYPE --<< INT web.retriever.process.urls.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed retriever process URLs."
::= { lnWeb 34 }
lnWebRetrieverProcessURLsRequested OBJECT-TYPE --<< INT web.retriever.process.urls.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requested retriever process URLs."
::= { lnWeb 35 }
lnWebRetrieverProcessURLsSucceeded OBJECT-TYPE --<< INT web.retriever.process.urls.succeeded
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of successful retriever process URLs."
::= { lnWeb 36 }
lnWebProcEntry OBJECT-TYPE
SYNTAX LnWebProcEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This defines the MIB variables specific to each Web Retriever process."
INDEX { lnWebProcIndex }
::= { lnWebProcTable 1 }
LnWebProcEntry ::= SEQUENCE {
lnWebProcIndex INTEGER,
lnWebProcNumber DisplayString,
lnWebProcAccFtp INTEGER,
lnWebProcAccGopher INTEGER,
lnWebProcAccHttp INTEGER,
lnWebProcKBytesRec INTEGER,
lnWebProcKBytesSent INTEGER,
lnWebProcCacheHits INTEGER,
lnWebProcCacheMisses INTEGER,
lnWebProcPid INTEGER,
lnWebProcUrlFail INTEGER,
lnWebProcUrlReq INTEGER,
lnWebProcUrlSucc INTEGER,
lnWebProcVpoolCurBuf INTEGER,
lnWebProcVpoolCurElement INTEGER,
lnWebProcVpoolCurMarker INTEGER,
lnWebProcVpoolCurText INTEGER,
lnWebProcVpoolCurUrl INTEGER,
lnWebProcVpoolMaxBuf INTEGER,
lnWebProcVpoolMaxElement INTEGER,
lnWebProcVpoolMaxMarker INTEGER,
lnWebProcVpoolMaxText INTEGER,
lnWebProcVpoolMaxUrl INTEGER
}
lnWebProcIndex OBJECT-TYPE --<< INDEX web.retriever.process.*
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique index entry for each Web Retriever process."
::= { lnWebProcEntry 1 }
lnWebProcNumber OBJECT-TYPE --<< NAME web.retriever.process.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number associated with the Web Retriever process in
the Notes stats structure."
::= { lnWebProcEntry 2 }
lnWebProcAccFtp OBJECT-TYPE --<< INT web.retriever.process.*.access.ftp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of FTP connections this Web Retriever process is handling."
::= { lnWebProcEntry 3 }
lnWebProcAccGopher OBJECT-TYPE --<< INT web.retriever.process.*.access.gopher
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Gopher connections this Web Retriever process
is handling."
::= { lnWebProcEntry 4 }
lnWebProcAccHttp OBJECT-TYPE --<< INT web.retriever.process.*.access.http
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of HTTP connections this Web Retriever process is handling."
::= { lnWebProcEntry 5 }
lnWebProcKBytesRec OBJECT-TYPE --<< KINT web.retriever.process.*.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of kilobytes this Web Retriever process has received."
::= { lnWebProcEntry 6 }
lnWebProcKBytesSent OBJECT-TYPE --<< KINT web.retriever.process.*.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of kilobytes this Web Retriever process has sent."
::= { lnWebProcEntry 7 }
lnWebProcCacheHits OBJECT-TYPE --<< INT web.retriever.process.*.imagecache.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of successful image cache hits for
this Web Retriever."
::= { lnWebProcEntry 8 }
lnWebProcCacheMisses OBJECT-TYPE --<< INT web.retriever.process.*.imagecache.misses
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of image cache misses for this Web Retriever."
::= { lnWebProcEntry 9 }
lnWebProcPid OBJECT-TYPE --<< INT web.retriever.process.*.pid
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The process ID associated with this Web Retriever process."
::= { lnWebProcEntry 10 }
lnWebProcUrlFail OBJECT-TYPE --<< INT web.retriever.process.*.urls.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL opens that failed for this Web Retriever process."
::= { lnWebProcEntry 11 }
lnWebProcUrlReq OBJECT-TYPE --<< INT web.retriever.process.*.urls.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL open requests this Web Retriever process handled."
::= { lnWebProcEntry 12 }
lnWebProcUrlSucc OBJECT-TYPE --<< INT web.retriever.process.*.urls.succeeded
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of successful URL opens this Web Retriever process handled."
::= { lnWebProcEntry 13 }
lnWebProcVpoolCurBuf OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.buf
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of buffer VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 14 }
lnWebProcVpoolCurElement OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.element
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of element VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 15 }
lnWebProcVpoolCurMarker OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.marker
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of marker VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 16 }
lnWebProcVpoolCurText OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.text
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of text VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 17 }
lnWebProcVpoolCurUrl OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.url
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 18 }
lnWebProcVpoolMaxBuf OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.buf
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of buffer VPOOLs allocated for this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 19 }
lnWebProcVpoolMaxElement OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.element
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of element VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 20 }
lnWebProcVpoolMaxMarker OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.marker
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 21 }
lnWebProcVpoolMaxText OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.text
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of text VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 22 }
lnWebProcVpoolMaxUrl OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.url
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 23 }
lnObjectFileName OBJECT-TYPE --<< STRING object.filename
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the primary single-copy object store (SCOS) database
currently in use."
::= { lnObject 1 }
lnObjectTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnObjectEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This table describes statistics for the single-copy object store
of each SCOS database that is currently being accessed."
::= { lnObject 2 }
lnObjectEntry OBJECT-TYPE
SYNTAX LnObjectEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"All items in LnObjectTable."
INDEX { lnObjectIndex }
::= { lnObjectTable 1 }
LnObjectEntry ::= SEQUENCE {
lnObjectIndex INTEGER,
lnObjectName DisplayString,
lnObjectSharedBy01 INTEGER,
lnObjectSharedBy02 INTEGER,
lnObjectSharedBy03 INTEGER,
lnObjectSharedBy04 INTEGER,
lnObjectSharedBy05 INTEGER,
lnObjectSharedBy06 INTEGER,
lnObjectSharedBy07 INTEGER,
lnObjectSharedBy08 INTEGER,
lnObjectSharedBy09 INTEGER,
lnObjectSharedBy10 INTEGER,
lnObjectSharedBy11 INTEGER,
lnObjectSharedBy12 INTEGER,
lnObjectSharedBy13 INTEGER,
lnObjectSharedBy14 INTEGER,
lnObjectSharedBy15 INTEGER,
lnObjectSharedBy16 INTEGER,
lnObjectSharedBy17 INTEGER,
lnObjectSharedBy18 INTEGER,
lnObjectSharedBy19 INTEGER,
lnObjectSharedBy20 INTEGER,
lnObjectSharedByGreater INTEGER,
lnObjectSharedByTotal INTEGER
}
lnObjectIndex OBJECT-TYPE --<< INDEX object.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"An internal index for each SCOS database in use."
::= { lnObjectEntry 1 }
lnObjectName OBJECT-TYPE --<< NAME object.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the single copy object store database."
::= { lnObjectEntry 2 }
lnObjectSharedBy01 OBJECT-TYPE --<< INT object.*.sharedby.01
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 1 pointer."
::= { lnObjectEntry 3 }
lnObjectSharedBy02 OBJECT-TYPE --<< INT object.*.sharedby.02
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 2 pointers."
::= { lnObjectEntry 4 }
lnObjectSharedBy03 OBJECT-TYPE --<< INT object.*.sharedby.03
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 3 pointers."
::= { lnObjectEntry 5 }
lnObjectSharedBy04 OBJECT-TYPE --<< INT object.*.sharedby.04
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 4 pointers."
::= { lnObjectEntry 6 }
lnObjectSharedBy05 OBJECT-TYPE --<< INT object.*.sharedby.05
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 5 pointers."
::= { lnObjectEntry 7 }
lnObjectSharedBy06 OBJECT-TYPE --<< INT object.*.sharedby.06
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 6 pointers."
::= { lnObjectEntry 8 }
lnObjectSharedBy07 OBJECT-TYPE --<< INT object.*.sharedby.07
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 7 pointers."
::= { lnObjectEntry 9 }
lnObjectSharedBy08 OBJECT-TYPE --<< INT object.*.sharedby.08
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 8 pointers."
::= { lnObjectEntry 10 }
lnObjectSharedBy09 OBJECT-TYPE --<< INT object.*.sharedby.09
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 9 pointers."
::= { lnObjectEntry 11 }
lnObjectSharedBy10 OBJECT-TYPE --<< INT object.*.sharedby.10
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 10 pointers."
::= { lnObjectEntry 12 }
lnObjectSharedBy11 OBJECT-TYPE --<< INT object.*.sharedby.11
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 11 pointers."
::= { lnObjectEntry 13 }
lnObjectSharedBy12 OBJECT-TYPE --<< INT object.*.sharedby.12
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 12 pointers."
::= { lnObjectEntry 14 }
lnObjectSharedBy13 OBJECT-TYPE --<< INT object.*.sharedby.13
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 13 pointers."
::= { lnObjectEntry 15 }
lnObjectSharedBy14 OBJECT-TYPE --<< INT object.*.sharedby.14
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 14 pointers."
::= { lnObjectEntry 16 }
lnObjectSharedBy15 OBJECT-TYPE --<< INT object.*.sharedby.15
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 15 pointers."
::= { lnObjectEntry 17 }
lnObjectSharedBy16 OBJECT-TYPE --<< INT object.*.sharedby.16
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 16 pointers."
::= { lnObjectEntry 18 }
lnObjectSharedBy17 OBJECT-TYPE --<< INT object.*.sharedby.17
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 17 pointers."
::= { lnObjectEntry 19 }
lnObjectSharedBy18 OBJECT-TYPE --<< INT object.*.sharedby.18
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 18 pointers."
::= { lnObjectEntry 20 }
lnObjectSharedBy19 OBJECT-TYPE --<< INT object.*.sharedby.19
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 19 pointers."
::= { lnObjectEntry 21 }
lnObjectSharedBy20 OBJECT-TYPE --<< INT object.*.sharedby.20
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 20 pointers."
::= { lnObjectEntry 22 }
lnObjectSharedByGreater OBJECT-TYPE --<< INT object.*.sharedby.greater
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with more than 20 pointers."
::= { lnObjectEntry 23 }
lnObjectSharedByTotal OBJECT-TYPE --<< INT object.*.sharedby.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of shared messages."
::= { lnObjectEntry 24 }
lnDominoBuildName OBJECT-TYPE --<< STRING domino.buildname
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name given to the build."
::= { lnDominoInfo 1 }
lnDominoBuildNumber OBJECT-TYPE --<< STRING domino.buildnumber
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The build number given to the build."
::= { lnDominoInfo 2 }
lnDominoBuildPlatform OBJECT-TYPE --<< STRING domino.buildplatform
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The platform this build was created on."
::= { lnDominoInfo 3 }
lnDominoBuildVersion OBJECT-TYPE --<< STRING domino.buildversion
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The version string associated with this build."
::= { lnDominoInfo 4 }
lnDominoThreadsActivePeak OBJECT-TYPE --<< INT domino.threads.active.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of active threads since the Domino server was started."
::= { lnDominoInfo 5 }
lnDominoThreadsTotal OBJECT-TYPE --<< INT domino.threads.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of available threads to service Domino requests."
::= { lnDominoInfo 6 }
lnDominoThreadsPeakTotal OBJECT-TYPE --<< INT domino.threads.peak.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total peak number of active threads since the Domino server
was started."
::= { lnDominoInfo 7 }
lnDominoThreadsPeakTime OBJECT-TYPE --<< TIME domino.threads.peak.time
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time when the peak number of threads to service Domino requests
occured, represented as the number of seconds since midnight
1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 8 }
lnDominoStartTime OBJECT-TYPE --<< TIME domino.starttime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time and date the Domino server was started, represented as the
number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 9 }
lnDominoReqPerMinTotal OBJECT-TYPE --<< INT domino.requests.per1minute.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requests in the last minute.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 10 }
lnDominoReqPerMinPeak OBJECT-TYPE --<< INT domino.requests.per1minute.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during
a one minute interval."
::= { lnDominoInfo 11 }
lnDominoReqPerMinPeakTime OBJECT-TYPE --<< TIME domino.requests.per1minute.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requests occured during
a one minute interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 12 }
lnDominoReqPer5MinsTotal OBJECT-TYPE --<< INT domino.requests.per5minute.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requests in the last five minutes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 13 }
lnDominoReqPer5MinsPeak OBJECT-TYPE --<< INT domino.requests.per5minute.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during a
five minute interval."
::= { lnDominoInfo 14 }
lnDominoReqPer5MinsPeakTime OBJECT-TYPE --<< TIME domino.requests.per5minute.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requets occured during
a five minute interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 15 }
lnDominoReqPerHourTotal OBJECT-TYPE --<< INT domino.requests.per1hour.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requetss in the last hour.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 16 }
lnDominoReqPerHourPeak OBJECT-TYPE --<< INT domino.requests.per1hour.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during a 1 hour
interval."
::= { lnDominoInfo 17 }
lnDominoReqPerHourPeakTime OBJECT-TYPE --<< TIME domino.requests.per1hour.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requests occured during a
one hour interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 18 }
lnDominoReqPerDayTotal OBJECT-TYPE --<< INT domino.requests.per1day.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requestes in the last day.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 19 }
lnDominoReqPerDayPeak OBJECT-TYPE --<< INT domino.requests.per1day.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during a one day interval."
::= { lnDominoInfo 20 }
lnDominoReqPerDayPeakTime OBJECT-TYPE --<< TIME domino.requests.per1day.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requests occured during
a one day interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 21 }
lnDominoRequestsTotal OBJECT-TYPE --<< INT domino.requests.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requests since the Domino server
was started. A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 22 }
lnDominoCacheCommandDisplaceRate OBJECT-TYPE --<< INT domino.cache.command.displacerate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Command cache displace rate."
::= { lnDominoInfo 23 }
lnDominoCacheCommandHitRate OBJECT-TYPE --<< INT domino.cache.command.hitrate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domino command cache hit rate."
::= { lnDominoInfo 24 }
lnDominoCacheDatabaseDisplaceRate OBJECT-TYPE --<< INT domino.cache.database.displacerate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domino database cache displace rate."
::= { lnDominoInfo 25 }
lnDominoCacheDatabaseHitRate OBJECT-TYPE --<< INT domino.cache.database.hitrate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domino database cache hit rate."
::= { lnDominoInfo 26 }
lnDominoCmdInfoEditDocument OBJECT-TYPE --<< INT domino.command.editdocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of EditDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 1 }
lnDominoCmdInfoOpenServer OBJECT-TYPE --<< INT domino.command.openserver
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenServer commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 2 }
lnDominoCmdInfoOpenDatabase OBJECT-TYPE --<< INT domino.command.opendatabase
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenDatabase commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 3 }
lnDominoCmdInfoOpenView OBJECT-TYPE --<< INT domino.command.openview
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenView commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 4 }
lnDominoCmdInfoOpenDocument OBJECT-TYPE --<< INT domino.command.opendocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 5 }
lnDominoCmdInfoOpenElement OBJECT-TYPE --<< INT domino.command.openelement
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenElement commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 6 }
lnDominoCmdInfoOpenIcon OBJECT-TYPE --<< INT domino.command.openicon
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenIcon commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 7 }
lnDominoCmdInfoOpenForm OBJECT-TYPE --<< INT domino.command.openform
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenForm commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 8 }
lnDominoCmdInfoOpenAgent OBJECT-TYPE --<< INT domino.command.openagent
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenAgent commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 9 }
lnDominoCmdInfoOpenNavigator OBJECT-TYPE --<< INT domino.command.opennavigator
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenNavigator commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 10 }
lnDominoCmdInfoOpenAbout OBJECT-TYPE --<< INT domino.command.openabout
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenAbout commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 11 }
lnDominoCmdInfoOpenHelp OBJECT-TYPE --<< INT domino.command.openhelp
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenHelp commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 12 }
lnDominoCmdInfoCreateDocument OBJECT-TYPE --<< INT domino.command.createdocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of CreateDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 13 }
lnDominoCmdInfoSaveDocument OBJECT-TYPE --<< INT domino.command.savedocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of SaveDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 14 }
lnDominoCmdInfoDeleteDocument OBJECT-TYPE --<< INT domino.command.deletedocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of DeleteDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 15 }
lnDominoCmdInfoSearchSite OBJECT-TYPE --<< INT domino.command.searchsite
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of SearchSite commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 16 }
lnDominoCmdInfoSearchView OBJECT-TYPE --<< INT domino.command.searchview
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of SearchView commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 17 }
lnDominoCmdInfoUnknown OBJECT-TYPE --<< INT domino.command.unknown
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of unrecognized Domino commands."
::= { lnDominoCmdInfo 18 }
lnDominoCmdInfoLogin OBJECT-TYPE --<< INT domino.command.login
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Login commands requested since the Domino server
was started."
::= { lnDominoCmdInfo 19 }
lnDominoCmdInfoNavigate OBJECT-TYPE --<< INT domino.command.navigate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Navigate commands requested since the Domino server
was started."
::= { lnDominoCmdInfo 20 }
lnDominoCmdInfoReadForm OBJECT-TYPE --<< INT domino.command.readform
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Read Form commands requested since the Domino server
was started."
::= { lnDominoCmdInfo 21 }
lnDominoCmdInfoTotal OBJECT-TYPE --<< INT domino.command.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of commands performed since the Domino server
was started."
::= { lnDominoCmdInfo 22 }
lnDominoCfgPortNumber OBJECT-TYPE --<< INT domino.config.portnumber
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The TCP/IP port number from the server record."
::= { lnDominoConfig 1 }
lnDominoCfgPortStatus OBJECT-TYPE --<< INT domino.config.portstatus
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The TCP/IP port status (enabled or disabled)."
::= { lnDominoConfig 2 }
lnDominoCfgHostName OBJECT-TYPE --<< STRING domino.config.hostname
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The HostName of the Domino server."
::= { lnDominoConfig 3 }
lnDominoCfgDNSLookup OBJECT-TYPE --<< INT domino.config.dnslookup
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The status of DNS lookup (enabled or disabled)."
::= { lnDominoConfig 4 }
lnDominoCfgHomeURL OBJECT-TYPE --<< STRING domino.config.homeurl
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The URL that requests are directed to if only the server name
is specified."
::= { lnDominoConfig 5 }
lnDominoCfgWelcomePage OBJECT-TYPE --<< STRING domino.config.welcomepage
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The page name to direct to if no explicit page name is
specified in the URL."
::= { lnDominoConfig 6 }
lnDominoCfgActiveThreadsMax OBJECT-TYPE --<< INT domino.config.activethreads.max
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of active threads servicing HTTP requests."
::= { lnDominoConfig 7 }
lnDominoCfgActiveThreadsMin OBJECT-TYPE --<< INT domino.config.activethreads.min
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The minimum number of active threads servicing HTTP requests."
::= { lnDominoConfig 8 }
lnDominoCfgSSLPortNumber OBJECT-TYPE --<< INT domino.config.ssl.portnumber
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The TCP/IP port number for HTTP requests using SLL."
::= { lnDominoConfig 9 }
lnDominoCfgSSLStatus OBJECT-TYPE --<< INT domino.config.ssl.status
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The SSL status (enabled or disabled)."
::= { lnDominoConfig 10 }
lnDominoCfgSSLKeyFile OBJECT-TYPE --<< STRING domino.config.ssl.keyfile
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The file name for SSL keys."
::= { lnDominoConfig 11 }
lnDominoCfgCacheDirectory OBJECT-TYPE --<< STRING domino.config.cache.directory
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The directory for the Domino cache."
::= { lnDominoConfig 12 }
lnDominoCfgCacheSizeMax OBJECT-TYPE --<< INT domino.config.cache.size.max
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum size of the Domino cache in MB."
::= { lnDominoConfig 13 }
lnDominoCfgCacheDelete OBJECT-TYPE --<< INT domino.config.cache.delete
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Delete Domino cache on shutdown (enabled or disabled)."
::= { lnDominoConfig 14 }
lnDominoCfgGarbageCollectionStatus OBJECT-TYPE --<< INT domino.config.garbagecollection.status
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of garbage collection (enabled or disabled)."
::= { lnDominoConfig 15 }
lnDominoCfgGarbageCollectionInterval OBJECT-TYPE --<< INT domino.config.garbagecollection.interval
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval between garbage collections in minutes."
::= { lnDominoConfig 16 }
lnDominoCfgImageFormat OBJECT-TYPE --<< STRING domino.config.image.format
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Graphics conversion image format."
::= { lnDominoConfig 17 }
lnDominoCfgImageInterlaced OBJECT-TYPE --<< INT domino.config.image.interlaced
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Graphics interlacing (enabled or disabled)."
::= { lnDominoConfig 18 }
lnDominoCfgViewLines OBJECT-TYPE --<< INT domino.config.view.lines
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of lines per view segment."
::= { lnDominoConfig 19 }
lnDominoCfgDirectoryHTML OBJECT-TYPE --<< STRING domino.config.directory.html
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The location of the HTML directory setting."
::= { lnDominoConfig 20 }
lnDominoCfgDirectoryURLPathCGI OBJECT-TYPE --<< STRING domino.config.urlpath.cgi
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The CGI URL path."
::= { lnDominoConfig 21 }
lnDominoCfgDirectoryCGI OBJECT-TYPE --<< STRING domino.config.directory.cgi
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The location of the CGI directory setting."
::= { lnDominoConfig 22 }
lnDominoCfgDirectoryURLPathIcons OBJECT-TYPE --<< STRING domino.config.urlpath.icons
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The Domino icons URL path."
::= { lnDominoConfig 23 }
lnDominoCfgDirectoryIcons OBJECT-TYPE --<< STRING domino.config.directory.icons
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The location of the Domino icons directory setting."
::= { lnDominoConfig 24 }
lnDominoCfgLogAccess OBJECT-TYPE --<< STRING domino.config.log.access
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The filename for Domino access logs."
::= { lnDominoConfig 25 }
lnDominoCfgLogError OBJECT-TYPE --<< STRING domino.config.log.error
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The filename for Domino error logs."
::= { lnDominoConfig 26 }
lnDominoCfgLogTimeStamp OBJECT-TYPE --<< STRING domino.config.log.timestamp
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The Domino timestamp format."
::= { lnDominoConfig 27 }
lnDominoCfgLogFilter OBJECT-TYPE --<< STRING domino.config.log.filter
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The Domino log filter setting."
::= { lnDominoConfig 28 }
lnDominoCfgTimeoutIdleThread OBJECT-TYPE --<< INT domino.config.timeout.idlethread
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before idle threads timeout."
::= { lnDominoConfig 29 }
lnDominoCfgTimeoutInput OBJECT-TYPE --<< INT domino.config.timeout.input
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before timeout expires while waiting
for input."
::= { lnDominoConfig 30 }
lnDominoCfgTimeoutOutput OBJECT-TYPE --<< INT domino.config.timeout.output
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before timeout expires while waiting
for output."
::= { lnDominoConfig 31 }
lnDominoCfgTimeoutCGI OBJECT-TYPE --<< INT domino.config.timeout.cgi
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before CGI timeout expires while waiting
for input."
::= { lnDominoConfig 32 }
lnCalTotalAllApptsResources OBJECT-TYPE --<< INT calendar.total.all.appts.reservations
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of scheduled appointment and resource reservations."
::= { lnCalendar 1 }
lnCalTotalAllUsersResources OBJECT-TYPE --<< INT calendar.total.all.users.resources
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of resources that have been reserved, plus
the number of users with scheduled appointments."
::= { lnCalendar 2 }
lnCalTotalAppointments OBJECT-TYPE --<< INT calendar.total.appts
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of scheduled appointments."
::= { lnCalendar 3 }
lnCalTotalReservations OBJECT-TYPE --<< INT calendar.total.reservations
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of reservations for resources."
::= { lnCalendar 4 }
lnCalTotalResources OBJECT-TYPE --<< INT calendar.total.resources
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of resources that have been reserved."
::= { lnCalendar 5 }
lnCalTotalUsers OBJECT-TYPE --<< INT calendar.total.users
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of users that have scheduled appointments."
::= { lnCalendar 6 }
lnCollectorTimeCollected OBJECT-TYPE --<< TIME collector.time.collected
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time and date at which the statistics collector task last
collected statistics; represented as the number of seconds
since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnCollector 1 }
lnCollectorTimeElapsed OBJECT-TYPE --<< STRING collector.time.elapsed
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that has elapsed since the statistics collector
task was started."
::= { lnCollector 2 }
lnClusterName OBJECT-TYPE --<< STRING server.cluster.name
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the cluster this server is a member of."
::= { lnCluster 1 }
lnClusterAvailIndex OBJECT-TYPE --<< INT server.cluster.availabilityindex
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current percentage or an index of the current server's
availability. A value of 0 indicates that the server has
virtually no available resources. A value of 100 indicates
that the server is completely available."
::= { lnCluster 2 }
lnClusterAvailThreshold OBJECT-TYPE --<< INT server.cluster.availabilitythreshold
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current setting of this server's availability threshold.
The value is compared against lnClusterAvailIndex.
BUSY - The availability index has dropped below the threshold."
::= { lnCluster 3 }
lnClusterPortName OBJECT-TYPE --<< STRING server.cluster.portname
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Default PortName being used for intra cluster network traffic.
There is no default port. Any available and active port may
be used for intra cluster traffic."
::= { lnCluster 4 }
lnClusterProbeCount OBJECT-TYPE --<< INT server.cluster.probecount
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of times this cluster member has completed a
probe request for another cluster member."
::= { lnCluster 5 }
lnClusterProbeTimeout OBJECT-TYPE --<< INT server.cluster.probetimeout(mins)
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"In Minutes. The interval between intra cluster probes or
cluster member heartbeats."
::= { lnCluster 6 }
lnClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnClusterEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each configured Notes server
cluster member known by this server."
::= { lnCluster 7 }
lnClusterProbeError OBJECT-TYPE --<< INT server.cluster.probeerror
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a server received an error while
probing another server."
::= { lnCluster 11 }
lnClusterEntry OBJECT-TYPE
SYNTAX LnClusterEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnClusterTable."
INDEX { lnClusterTableIndex }
::= { lnClusterTable 1 }
LnClusterEntry ::= SEQUENCE {
lnClusterTableIndex INTEGER,
lnClusterMemberName DisplayString,
lnClusterMemberIndex DisplayString
}
lnClusterTableIndex OBJECT-TYPE --<< INDEX server.cluster.member.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnClusterTable."
::= { lnClusterEntry 1 }
lnClusterMemberName OBJECT-TYPE --<< NAME server.cluster.member.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Name of Notes Cluster Member."
::= { lnClusterEntry 2 }
lnClusterMemberIndex OBJECT-TYPE --<< STRING server.cluster.member.*.index
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The last known load information for a cluster member."
::= { lnClusterEntry 3 }
lnClusterFailoverByPathSucc OBJECT-TYPE --<< INT server.cluster.openredirects.failoverbypath.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully able
to redirect a client to another cluster member after the
client was unable to open a database by pathname on
a cluster member."
::= { lnOpenRedirects 1 }
lnClusterFailoverByPathUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.failoverbypath.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client was unable to open a database by pathname for
a cluster member."
::= { lnOpenRedirects 2 }
lnClusterFailoverSucc OBJECT-TYPE --<< INT server.cluster.openredirects.failover.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully
able to redirect a client to another cluster member
after the client was unable to open a database by
replica ID on a cluster member."
::= { lnOpenRedirects 3 }
lnClusterFailoverUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.failover.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client was unable to open a database by replica ID on
a cluster member."
::= { lnOpenRedirects 4 }
lnClusterLoadBalByPathSucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalancebypath.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully able to
redirect a client to another cluster member after the client
attempted to open a database by pathname on a cluster
member that was BUSY."
::= { lnOpenRedirects 5 }
lnClusterLoadBalByPathUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalancebypath.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client attempted to open a database by pathname on a
cluster member that was BUSY."
::= { lnOpenRedirects 6 }
lnClusterLoadBalSucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalance.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully able to
redirect a client to another cluster member after the client
attempted to open a database by replica ID on a cluster
member that was BUSY."
::= { lnOpenRedirects 7 }
lnClusterLoadBalUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalance.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client attempted to open a database by replica ID on
a cluster member that was BUSY."
::= { lnOpenRedirects 8 }
lnClusterOpenReqClustBusy OBJECT-TYPE --<< INT server.cluster.openrequest.clusterbusy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times that a client attempted to open a
database on this cluster member when it and the rest
of the cluster were BUSY."
::= { lnOpenRequest 1 }
lnClusterOpenReqDBOutofServ OBJECT-TYPE --<< INT server.cluster.openrequest.databaseoutofservice
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a client attempted to open a database
that has been marked as out of service on this cluster
member."
::= { lnOpenRequest 2 }
lnClusterOpenReqLoadBalanced OBJECT-TYPE --<< INT server.cluster.openrequest.loadbalanced
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a client attempted to open a database
on this cluster member when the cluster member was BUSY."
::= { lnOpenRequest 3 }
lnClusterTransIntAvgTime OBJECT-TYPE --<< INT server.cluster.trans.intervalavgtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average transaction time (in milliseconds) for this
member of the cluster. Based on transaction data
captured over a number of recent intervals of time."
::= { lnClusterTrans 1 }
lnClusterTransIntInSec OBJECT-TYPE --<< INT server.cluster.trans.intervalinseconds
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current setting for the length of the intervals.
Used to capture transaction data for load balance
computations."
::= { lnClusterTrans 2 }
lnClusterTransIntUsedInAvg OBJECT-TYPE --<< INT server.cluster.trans.intervalsusedinavg
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current setting of the number for intervals being
used to capture transaction data on load balance
computations."
::= { lnClusterTrans 3 }
lnClusterTransLastIntAvgTime OBJECT-TYPE --<< INT server.cluster.trans.lastintervalavgtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average transaction time for the last interval of
transaction data captured on this cluster member."
::= { lnClusterTrans 4 }
lnClusterTransNormValue OBJECT-TYPE --<< INT server.cluster.trans.normalizevalue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current setting for the acceptable average
transaction time (in milliseconds) on this cluster
member."
::= { lnClusterTrans 5 }
lnClusterTransIntervalInMinutes OBJECT-TYPE --<< INT server.cluster.trans.intervalinminutes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Interval between cluster transactions."
::= { lnClusterTrans 6 }
lnClusterTransRunningAvgTime OBJECT-TYPE --<< TIME server.cluster.trans.runningavgtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average total running time of cluster transactions."
::= { lnClusterTrans 7 }
lnClusterTransRunningCount OBJECT-TYPE --<< INT server.cluster.trans.runningcount
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of cluster transactions."
::= { lnClusterTrans 8 }
lnClusterTransRunningTime OBJECT-TYPE --<< TIME server.cluster.trans.runningtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total running time of cluster transactions."
::= { lnClusterTrans 9 }
lnFTDomainIndexBytesPerHour OBJECT-TYPE --<< INT ft.domain.index.bytes.perhour
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domain full text indexing rate per hour of execution."
::= { lnFT 1 }
lnFTDomainIndexCount OBJECT-TYPE --<< INT ft.domain.index.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total domain full text indexing operations (1 per database or
file system)."
::= { lnFT 2 }
lnFTDomainIndexDocumentsAdded OBJECT-TYPE --<< INT ft.domain.index.documents.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of documents added to all domain full text indexes."
::= { lnFT 3 }
lnFTDomainIndexDocumentsDeleted OBJECT-TYPE --<< INT ft.domain.index.documents.deleted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents deleted from all domain full text indexes."
::= { lnFT 4 }
lnFTDomainIndexTotalBytes OBJECT-TYPE --<< INT ft.domain.index.total.bytes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total bytes added to all domain full text indexes."
::= { lnFT 5 }
lnFTDomainIndexTotalTimeMS OBJECT-TYPE --<< INT ft.domain.index.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time performing all domain full text indexing operations
in milliseconds."
::= { lnFT 6 }
lnFTDomainSearchAverageTimeMS OBJECT-TYPE --<< INT ft.domain.search.average.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average domain full text search time in milliseconds."
::= { lnFT 7 }
lnFTDomainSearchCount OBJECT-TYPE --<< INT ft.domain.search.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of all domain full text search operations."
::= { lnFT 8 }
lnFTDomainSearchMaxActualHits OBJECT-TYPE --<< INT ft.domain.search.max.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum documents found in a domain full text search."
::= { lnFT 9 }
lnFTDomainSearchTotalActualHits OBJECT-TYPE --<< INT ft.domain.search.total.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents found in all domain full text searches."
::= { lnFT 10 }
lnFTDomainSearchTotalResults OBJECT-TYPE --<< INT ft.domain.search.total.results
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents returned in all domain full text searches."
::= { lnFT 11 }
lnFTDomainSearchTotalTimeMS OBJECT-TYPE --<< INT ft.domain.search.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time spent performing all domain full text searches
in milliseconds."
::= { lnFT 12 }
lnFTIndexBytesPerHour OBJECT-TYPE --<< INT ft.index.bytes.perhour
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Full text indexing rate per hour of execution."
::= { lnFT 13 }
lnFTIndexCount OBJECT-TYPE --<< INT ft.index.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total full text indexing operations."
::= { lnFT 14 }
lnFTIndexDocumentsAdded OBJECT-TYPE --<< INT ft.index.documents.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of documents added to all full text indexes."
::= { lnFT 15 }
lnFTIndexDocumentsUpdated OBJECT-TYPE --<< INT ft.index.documents.updated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents updated in all full text indexes."
::= { lnFT 16 }
lnFTIndexTotalBytes OBJECT-TYPE --<< INT ft.index.total.bytes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total bytes added to all full text indexes."
::= { lnFT 17 }
lnFTIndexTotalTimeMS OBJECT-TYPE --<< INT ft.index.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time performing all full text indexing operations
in milliseconds."
::= { lnFT 18 }
lnFTSearchAverageTimeMS OBJECT-TYPE --<< INT ft.search.average.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average full text search time in milliseconds."
::= { lnFT 19 }
lnFTSearchCount OBJECT-TYPE --<< INT ft.search.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of all full text search operations."
::= { lnFT 20 }
lnFTSearchMaxActualHits OBJECT-TYPE --<< INT ft.search.max.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum documents found in a full text search."
::= { lnFT 21 }
lnFTSearchMaxResults OBJECT-TYPE --<< INT ft.search.max.results
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum documents returned in a full text search."
::= { lnFT 22 }
lnFTSearchTotalActualHits OBJECT-TYPE --<< INT ft.search.total.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents found in all full text searches."
::= { lnFT 23 }
lnFTSearchTotalResults OBJECT-TYPE --<< INT ft.search.total.results
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents returned in all full text searches."
::= { lnFT 24 }
lnFTSearchTotalTimeMS OBJECT-TYPE --<< INT ft.search.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time spent performing all full text searches in milliseconds."
::= { lnFT 25 }
lnICMCommandRedirectsClusterBusy OBJECT-TYPE --<< INT icm.command.redirects.clusterbusy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of commands received when all servers are busy."
::= { lnICM 1 }
lnICMCommandRedirectsSuccessful OBJECT-TYPE --<< INT icm.command.redirects.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of successful redirects."
::= { lnICM 2 }
lnICMCommandRedirectsUnsuccessful OBJECT-TYPE --<< INT icm.command.redirects.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of unsuccessful redirects."
::= { lnICM 3 }
lnICMCommandTotal OBJECT-TYPE --<< INT icm.command.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of commands received."
::= { lnICM 4 }
lnICMCommandUnknown OBJECT-TYPE --<< INT icm.command.unknown
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of unknown commands received."
::= { lnICM 5 }
lnICMReceiveError OBJECT-TYPE --<< INT icm.receive.error
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of commands not received due to error."
::= { lnICM 6 }
lnICMRequestsPer1HourTotal OBJECT-TYPE --<< INT icm.requests.per1hour.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requests received in the last hour."
::= { lnICM 7 }
lnICMRequestsPer1MinuteTotal OBJECT-TYPE --<< INT icm.requests.per1minute.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requests in the last one minute."
::= { lnICM 8 }
lnICMRequestsPer5MinutesTotal OBJECT-TYPE --<< INT icm.requests.per5minutes.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requests in the last 5 minutes."
::= { lnICM 9 }
lnICMSessionsThreadsBusy OBJECT-TYPE --<< INT icm.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of ICM server tasks currently running."
::= { lnICM 10 }
lnICMSessionsThreadsIdle OBJECT-TYPE --<< INT icm.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of ICM server tasks currently idle."
::= { lnICM 11 }
lnICMSessionsTotal OBJECT-TYPE --<< INT icm.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number ICM server tasks since server startup."
::= { lnICM 12 }
lnIMAPSessionsAcceptQueue OBJECT-TYPE --<< INT imap.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"IMAP listener work queue of incoming sessions to be processed."
::= { lnIMAP 1 }
lnIMAPSessionsActive OBJECT-TYPE --<< INT imap.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number IMAP server tasks."
::= { lnIMAP 2 }
lnIMAPSessionsInboundBytesReceived OBJECT-TYPE --<< INT imap.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this IMAP server."
::= { lnIMAP 3 }
lnIMAPSessionsInboundBytesSent OBJECT-TYPE --<< INT imap.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this IMAP server."
::= { lnIMAP 4 }
lnIMAPSessionsInboundNonSSL OBJECT-TYPE --<< INT imap.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server inbound TCP connections (non SSL)."
::= { lnIMAP 5 }
lnIMAPSessionsInboundSSL OBJECT-TYPE --<< INT imap.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP Server inbound SSL connections."
::= { lnIMAP 6 }
lnIMAPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT imap.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server SSL handshake failures."
::= { lnIMAP 7 }
lnIMAPSessionsInboundTotal OBJECT-TYPE --<< INT imap.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of IMAP server inbound connections (SSL & non SSL)."
::= { lnIMAP 8 }
lnIMAPSessionsPeak OBJECT-TYPE --<< INT imap.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number IMAP server tasks since server startup."
::= { lnIMAP 9 }
lnIMAPSessionsThreadsBusy OBJECT-TYPE --<< INT imap.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server tasks currently running."
::= { lnIMAP 10 }
lnIMAPSessionsThreadsIdle OBJECT-TYPE --<< INT imap.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server tasks currently idle."
::= { lnIMAP 11 }
lnIMAPSessionsTotal OBJECT-TYPE --<< INT imap.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number IMAP server tasks since server startup."
::= { lnIMAP 12 }
lnLDAPSessionsAcceptQueue OBJECT-TYPE --<< INT ldap.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"LDAP Listener work queue of incoming sessions to be processed."
::= { lnLDAP 1 }
lnLDAPSessionsActive OBJECT-TYPE --<< INT ldap.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number LDAP server tasks."
::= { lnLDAP 2 }
lnLDAPSessionsInboundBytesReceived OBJECT-TYPE --<< INT ldap.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this LDAP server."
::= { lnLDAP 3 }
lnLDAPSessionsInboundBytesSent OBJECT-TYPE --<< INT ldap.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this LDAP server."
::= { lnLDAP 4 }
lnLDAPSessionsInboundNonSSL OBJECT-TYPE --<< INT ldap.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server inbound TCP connections (non SSL)."
::= { lnLDAP 5 }
lnLDAPSessionsInboundSSL OBJECT-TYPE --<< INT ldap.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server inbound SSL connections."
::= { lnLDAP 6 }
lnLDAPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT ldap.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server SSL handshake failures."
::= { lnLDAP 7 }
lnLDAPSessionsInboundTotal OBJECT-TYPE --<< INT ldap.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of LDAP server inbound connections (SSL & non SSL)."
::= { lnLDAP 8 }
lnLDAPSessionsPeak OBJECT-TYPE --<< INT ldap.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number LDAP server tasks since server startup."
::= { lnLDAP 9 }
lnLDAPSessionsThreadsBusy OBJECT-TYPE --<< INT ldap.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server tasks currently running."
::= { lnLDAP 10 }
lnLDAPSessionsThreadsIdle OBJECT-TYPE --<< INT ldap.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server tasks currently idle."
::= { lnLDAP 11 }
lnLDAPSessionsTotal OBJECT-TYPE --<< INT ldap.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number LDAP server tasks since server startup."
::= { lnLDAP 12 }
lnMailByDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnMailByDestEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information by mail destination."
::= { lnMailByDest 1 }
lnMailByDestEntry OBJECT-TYPE
SYNTAX LnMailByDestEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnMailByDestTable."
INDEX { lnMailByDestIndex }
::= { lnMailByDestTable 1 }
LnMailByDestEntry ::= SEQUENCE {
lnMailByDestIndex INTEGER,
lnMailByDestName DisplayString,
lnMailByDestDelivered INTEGER,
lnMailByDestTotalFailures INTEGER,
lnMailByDestTotalRouted INTEGER
}
lnMailByDestIndex OBJECT-TYPE --<< INDEX mailbydest.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnMailByDestTable."
::= { lnMailByDestEntry 1 }
lnMailByDestName OBJECT-TYPE --<< NAME mailbydest.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the mail destination."
::= { lnMailByDestEntry 2 }
lnMailByDestDelivered OBJECT-TYPE --<< INT mailbydest.*.delivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of delivered messages."
::= { lnMailByDestEntry 3 }
lnMailByDestTotalFailures OBJECT-TYPE --<< INT mailbydest.*.totalfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of mail failures."
::= { lnMailByDestEntry 4 }
lnMailByDestTotalRouted OBJECT-TYPE --<< INT mailbydest.*.totalrouted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of routed messages."
::= { lnMailByDestEntry 5 }
lnMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnMonitorEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about events."
::= { lnMonitor 1 }
lnMonitorEntry OBJECT-TYPE
SYNTAX LnMonitorEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnMonitorTable."
INDEX { lnMonitorIndex }
::= { lnMonitorTable 1 }
LnMonitorEntry ::= SEQUENCE {
lnMonitorIndex INTEGER,
lnMonitorName DisplayString,
lnMonitorFailure DisplayString,
lnMonitorFatal DisplayString,
lnMonitorHeartbeat INTEGER,
lnMonitorWarningHigh DisplayString
}
lnMonitorIndex OBJECT-TYPE --<< INDEX monitor.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnMonitorTable."
::= { lnMonitorEntry 1 }
lnMonitorName OBJECT-TYPE --<< NAME monitor.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the event."
::= { lnMonitorEntry 2 }
lnMonitorFailure OBJECT-TYPE --<< STRING monitor.*.failure
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Event queue failure."
::= { lnMonitorEntry 3 }
lnMonitorFatal OBJECT-TYPE --<< STRING monitor.*.fatal
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Event queue fatal error."
::= { lnMonitorEntry 4 }
lnMonitorHeartbeat OBJECT-TYPE --<< INT monitor.*.heartbeat
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Event heartbeat count."
::= { lnMonitorEntry 5 }
lnMonitorWarningHigh OBJECT-TYPE --<< STRING monitor.*.warning(high)
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Event queue failure warning."
::= { lnMonitorEntry 6 }
lnNNTPArticlesPosted OBJECT-TYPE --<< INT nntp.articles.posted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles posted to the NNTP server."
::= { lnNNTP 1 }
lnNNTPArticlesSent OBJECT-TYPE --<< INT nntp.articles.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles sent from the NNTP server."
::= { lnNNTP 2 }
lnNNTPBytesReceived OBJECT-TYPE --<< INT nntp.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes received by NNTP server."
::= { lnNNTP 3 }
lnNNTPBytesSent OBJECT-TYPE --<< INT nntp.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes sent from NNTP server."
::= { lnNNTP 4 }
lnNNTPPullArticlesFailed OBJECT-TYPE --<< INT nntp.pull.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers received by the NNTP
server during pull feeds."
::= { lnNNTP 5 }
lnNNTPPullArticlesOffered OBJECT-TYPE --<< INT nntp.pull.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered by the NNTP server during pull feeds."
::= { lnNNTP 6 }
lnNNTPPullArticlesRequested OBJECT-TYPE --<< INT nntp.pull.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested from the NNTP server during
pull feeds."
::= { lnNNTP 7 }
lnNNTPPullArticlesTransferred OBJECT-TYPE --<< INT nntp.pull.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred by the NNTP server during
pull feeds."
::= { lnNNTP 8 }
lnNNTPPushArticlesFailed OBJECT-TYPE --<< INT nntp.push.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers by the NNTP server during
push feeds."
::= { lnNNTP 9 }
lnNNTPPushArticlesOffered OBJECT-TYPE --<< INT nntp.push.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered by the NNTP server during push feeds."
::= { lnNNTP 10 }
lnNNTPPushArticlesRequested OBJECT-TYPE --<< INT nntp.push.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested from the NNTP server during
push feeds."
::= { lnNNTP 11 }
lnNNTPPushArticlesTransferred OBJECT-TYPE --<< INT nntp.push.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred by the NNTP server during
push feeds."
::= { lnNNTP 12 }
lnNNTPSessionsAcceptQueue OBJECT-TYPE --<< INT nntp.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"NNTP listener work queue of incoming sessions to be processed."
::= { lnNNTP 13 }
lnNNTPSessionsActive OBJECT-TYPE --<< INT nntp.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number NNTP server tasks."
::= { lnNNTP 14 }
lnNNTPSessionsInboundBytesReceived OBJECT-TYPE --<< INT nntp.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this NNTP server."
::= { lnNNTP 15 }
lnNNTPSessionsInboundBytesSent OBJECT-TYPE --<< INT nntp.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this NNTP server."
::= { lnNNTP 16 }
lnNNTPSessionsInboundNonSSL OBJECT-TYPE --<< INT nntp.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server inbound TCP connections (non SSL)."
::= { lnNNTP 17 }
lnNNTPSessionsInboundSSL OBJECT-TYPE --<< INT nntp.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server inbound SSL connections."
::= { lnNNTP 18 }
lnNNTPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT nntp.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server SSL handshake failures."
::= { lnNNTP 19 }
lnNNTPSessionsInboundTotal OBJECT-TYPE --<< INT nntp.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of NNTP server inbound connections (SSL & non SSL)."
::= { lnNNTP 20 }
lnNNTPSessionsOutgoingnonSSL OBJECT-TYPE --<< INT nntp.sessions.outgoing.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total outgoing non-SSL TCP connections."
::= { lnNNTP 21 }
lnNNTPSessionsOutgoingSSL OBJECT-TYPE --<< INT nntp.sessions.outgoing.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total outgoing SSL TCP connections."
::= { lnNNTP 22 }
lnNNTPSessionsPeak OBJECT-TYPE --<< INT nntp.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number NNTP server tasks since server startup."
::= { lnNNTP 23 }
lnNNTPSessionsThreadsBusy OBJECT-TYPE --<< INT nntp.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server tasks currently running."
::= { lnNNTP 24 }
lnNNTPSessionsThreadsIdle OBJECT-TYPE --<< INT nntp.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server tasks currently idle."
::= { lnNNTP 25 }
lnNNTPSessionsTotal OBJECT-TYPE --<< INT nntp.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number NNTP server tasks since server startup."
::= { lnNNTP 26 }
lnNNTPServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNNTPServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about NNTP remote servers."
::= { lnNNTP 27 }
lnNNTPServerEntry OBJECT-TYPE
SYNTAX LnNNTPServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNNTPServerTable."
INDEX { lnNNTPServerIndex }
::= { lnNNTPServerTable 1 }
LnNNTPServerEntry ::= SEQUENCE {
lnNNTPServerIndex INTEGER,
lnNNTPServerName DisplayString,
lnNNTPServerArticlesPosted INTEGER,
lnNNTPServerArticlesSent INTEGER,
lnNNTPServerBytesReceived INTEGER,
lnNNTPServerBytesSent INTEGER,
lnNNTPServerPullArticlesFailed INTEGER,
lnNNTPServerPullArticlesOffered INTEGER,
lnNNTPServerPullArticlesRequested INTEGER,
lnNNTPServerPullArticlesTransferred INTEGER,
lnNNTPServerPushArticlesFailed INTEGER,
lnNNTPServerPushArticlesOffered INTEGER,
lnNNTPServerPushArticlesRequested INTEGER,
lnNNTPServerPushArticlesTransferred INTEGER
}
lnNNTPServerIndex OBJECT-TYPE --<< INDEX nntp.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnNNTPServerTable."
::= { lnNNTPServerEntry 1 }
lnNNTPServerName OBJECT-TYPE --<< NAME nntp.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the remote NNTP server."
::= { lnNNTPServerEntry 2 }
lnNNTPServerArticlesPosted OBJECT-TYPE --<< INT nntp.*.articles.posted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles posted by the server 'RemoteServerName'
to the NNTP server."
::= { lnNNTPServerEntry 3 }
lnNNTPServerArticlesSent OBJECT-TYPE --<< INT nntp.*.articles.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles sent to the server 'RemoteServerName'
from the NNTP server."
::= { lnNNTPServerEntry 4 }
lnNNTPServerBytesReceived OBJECT-TYPE --<< INT nntp.*.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes received from the server 'RemoteServerName'
by the NNTP server."
::= { lnNNTPServerEntry 5 }
lnNNTPServerBytesSent OBJECT-TYPE --<< INT nntp.*.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes sent to the server 'RemoteServerName' by the
NNTP server."
::= { lnNNTPServerEntry 6 }
lnNNTPServerPullArticlesFailed OBJECT-TYPE --<< INT nntp.*.pull.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers from the server
'RemoteServerName' to the NNTP server during pull feeds."
::= { lnNNTPServerEntry 7 }
lnNNTPServerPullArticlesOffered OBJECT-TYPE --<< INT nntp.*.pull.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered by the server 'RemoteServerName'
to the NNTP server during pull feeds."
::= { lnNNTPServerEntry 8 }
lnNNTPServerPullArticlesRequested OBJECT-TYPE --<< INT nntp.*.pull.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested from server 'RemoteServerName'
by the NNTP server during pull feeds."
::= { lnNNTPServerEntry 9 }
lnNNTPServerPullArticlesTransferred OBJECT-TYPE --<< INT nntp.*.pull.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred from 'RemoteServerName'
to the NNTP server during pull feeds."
::= { lnNNTPServerEntry 10 }
lnNNTPServerPushArticlesFailed OBJECT-TYPE --<< INT nntp.*.push.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers to server 'RemoteServerName'
by the NNTP server during push feeds."
::= { lnNNTPServerEntry 11 }
lnNNTPServerPushArticlesOffered OBJECT-TYPE --<< INT nntp.*.push.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered to the server 'RemoteServerName'
by the NNTP server during push feeds."
::= { lnNNTPServerEntry 12 }
lnNNTPServerPushArticlesRequested OBJECT-TYPE --<< INT nntp.*.push.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested by the server 'RemoteServerName'
from the NNTP server during push feeds."
::= { lnNNTPServerEntry 13 }
lnNNTPServerPushArticlesTransferred OBJECT-TYPE --<< INT nntp.*.push.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred to the server 'RemoteServerName'
by the NNTP server during push feeds."
::= { lnNNTPServerEntry 14 }
lnPOP3SessionsAcceptQueue OBJECT-TYPE --<< INT pop3.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"POP3 listener work queue of incoming sessions to be processed."
::= { lnPOP3 1 }
lnPOP3SessionsActive OBJECT-TYPE --<< INT pop3.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number of POP3 server tasks."
::= { lnPOP3 2 }
lnPOP3SessionsInboundBytesReceived OBJECT-TYPE --<< INT pop3.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this POP3 server."
::= { lnPOP3 3 }
lnPOP3SessionsInboundBytesSent OBJECT-TYPE --<< INT pop3.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this POP3 server."
::= { lnPOP3 4 }
lnPOP3SessionsInboundNonSSL OBJECT-TYPE --<< INT pop3.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server inbound TCP connections (non SSL)."
::= { lnPOP3 5 }
lnPOP3SessionsInboundSSL OBJECT-TYPE --<< INT pop3.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server inbound SSL connections."
::= { lnPOP3 6 }
lnPOP3SessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT pop3.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server SSL handshake failures."
::= { lnPOP3 7 }
lnPOP3SessionsInboundTotal OBJECT-TYPE --<< INT pop3.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of POP3 server inbound connections (SSL & non SSL)."
::= { lnPOP3 8 }
lnPOP3SessionsPeak OBJECT-TYPE --<< INT pop3.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number POP3 server tasks since server startup."
::= { lnPOP3 9 }
lnPOP3SessionsThreadsBusy OBJECT-TYPE --<< INT pop3.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server tasks currently running."
::= { lnPOP3 10 }
lnPOP3SessionsThreadsIdle OBJECT-TYPE --<< INT pop3.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server tasks currently idle."
::= { lnPOP3 11 }
lnPOP3SessionsTotal OBJECT-TYPE --<< INT pop3.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number POP3 server tasks since server startup."
::= { lnPOP3 12 }
lnPOP3UserCacheAttempts OBJECT-TYPE --<< STRING pop3.usercache.attempts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"POP3 attempt to find user in cache."
::= { lnPOP3 13 }
lnPOP3UserCacheHits OBJECT-TYPE --<< STRING pop3.usercache.hits
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Found in cache."
::= { lnPOP3 14 }
lnPOP3UserCacheInserts OBJECT-TYPE --<< STRING pop3.usercache.inserts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Successful insert into cache."
::= { lnPOP3 15 }
lnPOP3UserCacheLookups OBJECT-TYPE --<< STRING pop3.usercache.lookups
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"POP3 successful lookup user in cache."
::= { lnPOP3 16 }
lnPOP3UserCacheOpenReasonCacheFull OBJECT-TYPE --<< STRING pop3.usercache.openreasoncachefull
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Cache full."
::= { lnPOP3 17 }
lnPOP3UserCacheOpenReasonDBChanged OBJECT-TYPE --<< STRING pop3.usercache.openreasondbchanged
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Reason for open is DB changed."
::= { lnPOP3 18 }
lnPOP3UserCacheOpenReasonNewEntry OBJECT-TYPE --<< STRING pop3.usercache.openreasonnewentry
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Reason for open is new entry."
::= { lnPOP3 19 }
lnQOSMailISpyProbeError OBJECT-TYPE --<< STRING qos.mail.ispy.probeerror
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Mail Probe Error."
::= { lnQOS 1 }
lnQOSMailProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnQOSMailProbeEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about mail probes."
::= { lnQOS 2 }
lnQOSMailProbeEntry OBJECT-TYPE
SYNTAX LnQOSMailProbeEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnQOSMailProbeTable."
INDEX { lnQOSMailProbeIndex }
::= { lnQOSMailProbeTable 1 }
LnQOSMailProbeEntry ::= SEQUENCE {
lnQOSMailProbeIndex INTEGER,
lnQOSMailProbeName DisplayString,
lnQOSMailISpyResponseTime INTEGER
}
lnQOSMailProbeIndex OBJECT-TYPE --<< INDEX qos.mail.ispy.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnQOSMailProbeTable."
::= { lnQOSMailProbeEntry 1 }
lnQOSMailProbeName OBJECT-TYPE --<< NAME qos.mail.ispy.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the server."
::= { lnQOSMailProbeEntry 2 }
lnQOSMailISpyResponseTime OBJECT-TYPE --<< INT qos.mail.ispy.*.responsetime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Mail Probe response time."
::= { lnQOSMailProbeEntry 3 }
lnReporterTimeAnalysis OBJECT-TYPE --<< TIME reporter.time.analysis
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time stats were analyzed."
::= { lnReporter 1 }
lnReporterTimeCollected OBJECT-TYPE --<< TIME reporter.time.collected
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time stats were collected."
::= { lnReporter 2 }
lnReporterTimeElapsed OBJECT-TYPE --<< TIME reporter.time.elapsed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time since reporter was started."
::= { lnReporter 3 }
lnSEMTimeouts OBJECT-TYPE --<< STRING sem.timeouts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"OS Sem timeout."
::= { lnSem 1 }
lnSMTPMessagesProcessed OBJECT-TYPE --<< INT smtp.messagesprocessed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP messages processed."
::= { lnSMTP 1 }
lnSMTPSessionsAcceptQueue OBJECT-TYPE --<< INT smtp.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SMTP listener work queue of incoming sessions to be processed."
::= { lnSMTP 2 }
lnSMTPSessionsActive OBJECT-TYPE --<< INT smtp.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number SMTP server tasks."
::= { lnSMTP 3 }
lnSMTPSessionsInboundBytesReceived OBJECT-TYPE --<< INT smtp.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this SMTP server."
::= { lnSMTP 4 }
lnSMTPSessionsInboundBytesSent OBJECT-TYPE --<< INT smtp.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this SMTP server."
::= { lnSMTP 5 }
lnSMTPSessionsInboundNonSSL OBJECT-TYPE --<< INT smtp.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server inbound TCP connections (non SSL)."
::= { lnSMTP 6 }
lnSMTPSessionsInboundSSL OBJECT-TYPE --<< INT smtp.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server inbound SSL connections."
::= { lnSMTP 7 }
lnSMTPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT smtp.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server SSL handshake failures."
::= { lnSMTP 8 }
lnSMTPSessionsInboundTotal OBJECT-TYPE --<< INT smtp.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of SMTP server inbound connections (SSL & non SSL)."
::= { lnSMTP 9 }
lnSMTPSessionsPeak OBJECT-TYPE --<< INT smtp.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number SMTP server tasks since server startup."
::= { lnSMTP 10 }
lnSMTPSessionsThreadsBusy OBJECT-TYPE --<< INT smtp.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server tasks currently running."
::= { lnSMTP 11 }
lnSMTPSessionsThreadsIdle OBJECT-TYPE --<< INT smtp.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server tasks currently idle."
::= { lnSMTP 12 }
lnSMTPSessionsTotal OBJECT-TYPE --<< INT smtp.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number SMTP server tasks since server startup."
::= { lnSMTP 13 }
lnSMTPStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnSMTPStatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing various information about various SMTP statistics."
::= { lnSMTP 14 }
lnSMTPStatEntry OBJECT-TYPE
SYNTAX LnSMTPStatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnSMTPStatTable."
INDEX { lnSMTPStatIndex }
::= { lnSMTPStatTable 1 }
LnSMTPStatEntry ::= SEQUENCE {
lnSMTPStatIndex INTEGER,
lnSMTPStatName DisplayString,
lnSMTPAve INTEGER,
lnSMTPCount INTEGER,
lnSMTPMax INTEGER,
lnSMTPMin INTEGER,
lnSMTPTotal INTEGER
}
lnSMTPStatIndex OBJECT-TYPE --<< INDEX smtp.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnSMTPStatTable."
::= { lnSMTPStatEntry 1 }
lnSMTPStatName OBJECT-TYPE --<< NAME smtp.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the statistic."
::= { lnSMTPStatEntry 2 }
lnSMTPAve OBJECT-TYPE --<< INT smtp.*.ave
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average for this SMTP statistic."
::= { lnSMTPStatEntry 3 }
lnSMTPCount OBJECT-TYPE --<< INT smtp.*.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count for this SMTP statistic."
::= { lnSMTPStatEntry 4 }
lnSMTPMax OBJECT-TYPE --<< INT smtp.*.max
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum for this SMTP statistic."
::= { lnSMTPStatEntry 5 }
lnSMTPMin OBJECT-TYPE --<< INT smtp.*.min
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum for this SMTP statistic."
::= { lnSMTPStatEntry 6 }
lnSMTPTotal OBJECT-TYPE --<< INT smtp.*.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total for this SMTP statistic."
::= { lnSMTPStatEntry 7 }
lnSpinAvtIterToHit OBJECT-TYPE --<< INT spin.avtitertohit
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average of Spin Lock Iterations to Hits."
::= { lnSpin 1 }
lnSpinDelays OBJECT-TYPE --<< INT spin.delays
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of Spin Lock Delays."
::= { lnSpin 2 }
lnSpinDelaysMsecs OBJECT-TYPE --<< INT spin.delaysmsecs
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock Delay in msecs."
::= { lnSpin 3 }
lnSpinFRWSemGetReadExt OBJECT-TYPE --<< INT spin.frwsemgetreadext
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock FRW semaphore read."
::= { lnSpin 4 }
lnSpinFRWSemPutReadExt OBJECT-TYPE --<< INT spin.frwsemputreadext
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock frw semaphore put."
::= { lnSpin 5 }
lnSpinHits OBJECT-TYPE --<< INT spin.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of Spin Lock Hits."
::= { lnSpin 6 }
lnSpinMaxDelayMask OBJECT-TYPE --<< INT spin.maxdelaymask
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock max delay mask."
::= { lnSpin 7 }
lnSpinMaxDelayMsecs OBJECT-TYPE --<< INT spin.maxdelaymsecs
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock max delay in msecs."
::= { lnSpin 8 }
-- End of the lnStats branch.
lnMIBVersion OBJECT-TYPE -- Internally implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Domino SNMP support level (MIB Version)."
::= { lnInfo 3 }
lnQSBuildNumber OBJECT-TYPE -- Internally implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The build number of the Query/Set Notes add-in task."
::= { lnInfo 5 }
-- End of the lnInfo branch.
lnNotesServerSetState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set to 'down' to shut Notes server down, set to 'up' to
restart Notes server. Note: access to this feature is
controlled through external (non-SNMP) security measures."
::= { lnControl 1 }
lnNotesServerState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
not-responding(3),
crashed(4),
unknown(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Equals 'down' if the Notes server is down, equals 'up'
if the Notes server is running."
::= { lnControl 2 }
lnLastTrapSeq OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sequence number of last trap sent. Same as the
index number that trap in the lnRecentTrapsTable."
::= { lnControl 3 }
lnRecentTrapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnRecentTrapsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing the last 10 generated traps."
::= { lnControl 4 }
lnRecentTrapsEntry OBJECT-TYPE
SYNTAX LnRecentTrapsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The entry type definition for the lnRecentTrapsTable."
INDEX { lnTrapSeq }
::= { lnRecentTrapsTable 1 }
LnRecentTrapsEntry ::= SEQUENCE {
lnTrapSeq INTEGER,
lnTrapInfo DisplayString
}
lnTrapSeq OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each trap record in the sequence
of entries returned to the lnRecentTrapsTable."
::= { lnRecentTrapsEntry 1 }
lnTrapInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string containing the information for a trap."
::= { lnRecentTrapsEntry 2 }
lnRemoteReboot OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set to 'yes' to reboot the entire system.
This value will be returned as 'yes' if the system is in
the process of rebooting but hasn't come down yet."
::= { lnControl 5 }
lnServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing the list of Domino Servers that have been
partitioned across this machine. This must be configured by the
system administrator. This table only reflects the Domino Servers
that are listed in the file lnsnmp.ini since there is no way to
query a given machine for a list of potentially available servers."
::= { lnControl 6 }
lnTotalPartitions OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the file lnsnmp.ini exists, this MIB variable will represent
the number of 'Server=' entries in that file. If the file lnsnmp.ini
does not exist, the value of lnTotalPartitions will equal zero."
::= { lnControl 7 }
lnMPAIniFileLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The directory that the file lnsnmp.ini was read from.
Normally this is either the Windows-NT directory or this will
be /opt/lotus for UNIX systems. However, on either platform, if
the file is not found, the PATH environment variable will be
searched. The first instance of lnsnmp.ini in the PATH will
be opened."
::= { lnControl 8 }
lnServerEntry OBJECT-TYPE
SYNTAX LnServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnServerTable."
INDEX { lnServerTblIndex }
::= { lnServerTable 1 }
LnServerEntry ::= SEQUENCE {
lnServerTblIndex INTEGER,
lnServerTblName DisplayString,
lnServerTblNotesPartition INTEGER,
lnServerTblDataDir DisplayString,
lnServerTblDataDirValid INTEGER,
lnServerTblState INTEGER,
lnServerIdentifiedItself INTEGER,
lnServerTblSetState INTEGER
}
lnServerTblIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The MIB index for this row in the lnServerTable."
::= { lnServerEntry 1 }
lnServerTblName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the server as it appears in lnsnmp.ini.
However, if a server's addin task registers with the Main Proxy Agent,
The addin task will update the server's name with the correct name
if a match can be found."
::= { lnServerEntry 2 }
lnServerTblNotesPartition OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The value that is entered in lnsnmp.ini.
This MUST match the environment variable NOTESPARTITION for
Domino Servers partitioned on Windows-NT Systems. This
has no real meaning for Domino Servers on UNIX platforms."
::= { lnServerEntry 3 }
lnServerTblDataDir OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The data directory of the given Domino server as entered
in lnsnmp.ini; See lnServerTblDataDirValid for an indication on
whether or not this is a valid Domino Server data directory."
::= { lnServerEntry 4 }
lnServerTblDataDirValid OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The Main Proxy Agent validates the Domino Server data directory
that is entered in lnsnmp.ini. This will be TRUE if this is a valid
directory and the file notes.ini exists within that directory.
It will be false otherwise."
::= { lnServerEntry 5 }
lnServerTblState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This will indicate the current state of the server. The server will
be considered down until at least one of the Domino Management Agent
tasks starts and registers with the Main Proxy Agent."
::= { lnServerEntry 6 }
lnServerIdentifiedItself OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This will indicate if the server has ever run and identified
itself to the Main Proxy Agent at any time during the current
lifespan of the Main Proxy Agent. This may be used as an
indication that a given Domino server may not be configured
correctly in lnsnmp.ini. The server identification occurs when
one of the Domino Management Agent addin tasks is started."
::= { lnServerEntry 7 }
lnServerTblSetState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-write
STATUS optional
DESCRIPTION
"This will indicate the current state of the Domino server and
allow remote SNMP control over stopping & starting the Domino
server. The server will be considered down until at least one
of the Domino management Agent addin tasks starts and registers
with the Main Proxy Agent."
::= { lnServerEntry 8 }
lnEvtServer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Originating server for this event."
::= { lnInterceptor 1 }
lnEvtType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
communications(1),
security(2),
mail(3),
replication(4),
resource(5),
miscellaneous(6),
server(7),
alarm(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns a value for the type of this event."
::= { lnInterceptor 2 }
lnEvtSeverity OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
fatal(1),
failure(2),
warning1(3),
warning2(4),
normal(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns a value for the severity of this event."
::= { lnInterceptor 3 }
lnEvtWhen OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns a value for the date and time of this event."
::= { lnInterceptor 4 }
lnEvtData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Information about this event."
::= { lnInterceptor 5 }
lnEvtSeq OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sequence number of this event for internal
use only. This information is not available in
this MIB variable. If you wish to determine the
sequence number for the last trap, please see
the variable lnControl.lnRecentTrapsTable.lnRecentTrapEntry.lnTrapSeq."
::= { lnInterceptor 6 }
-- ** Define the Unix specific variables.
lnAlarm OBJECT IDENTIFIER ::= { lnUnix 1 }
lnSignal OBJECT IDENTIFIER ::= { lnUnix 2 }
-- ** Define the trap variables used in the Alarm Manager, nvalarmgrd
lnAlarmServerHandle OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the server for which the alarm will be generated for."
::= { lnAlarm 1 }
lnAlarmTargetHandle OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the entity on the server that caused the alarm
to be generated."
::= { lnAlarm 2 }
lnAlarmDate OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The date the alarm occured."
::= { lnAlarm 3 }
lnAlarmTime OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time the alarm occured."
::= { lnAlarm 4 }
lnAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
informational(1),
disabled(2),
unmanaged(3),
unknown(4),
marginal(5),
warning(6),
minor(7),
major(8),
critical(9)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The severity of the alarm being generated by the SNMP trap."
::= { lnAlarm 5 }
lnAlarmIntArg OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Returns a value for the integer argument associated with the Alarm."
::= { lnAlarm 6 }
lnAlarmLongArg OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The long integer argument associated with the Alarm."
::= { lnAlarm 7 }
lnAlarmDoubleArg OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS optional
DESCRIPTION
"The string representation of a floating point value."
::= { lnAlarm 8 }
lnAlarmTextArg1 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS optional
DESCRIPTION
"The first text argument associated with the Alarm."
::= { lnAlarm 9 }
lnAlarmTextArg2 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS optional
DESCRIPTION
"The second text argument associated with the Alarm."
::= { lnAlarm 10 }
lnAlarmSeverityStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A string representation of the alarm severity. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards."
::= { lnAlarm 11 }
lnAlarmTypeStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A string representation of the alarm's type. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards."
::= { lnAlarm 12 }
lnAlarmMessage OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A message indicating why the alarm was raised. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards."
::= { lnAlarm 13 }
lnAlarmMessageExt OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A message extension with more detailed information explaining
why the alarm was raised. This is used in the trap that is sent
to the management station to be displayed on the NetView event
cards."
::= { lnAlarm 14 }
lnAlarmServerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The server name of the Notes server the alarm was raised
against. This is used in the trap that is sent to the management
station to be displayed in the NetView event cards."
::= { lnAlarm 15 }
--Define some variables for signals and messages
lnSignalServerId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer that represents the ServerId of the
Notes server that caused the signal to be raised."
::= { lnSignal 1 }
lnSignalOldServerType OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an the integer value representing the old server class."
::= { lnSignal 2 }
lnSignalNewServerType OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer value representing the new server class."
::= { lnSignal 3 }
lnSignalWhatHasChanged OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer value indicating what has changed on the server."
::= { lnSignal 4 }
lnSignalServerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The server name. This will appear in the information trap
displayed in the NetView Event Cards when a specific server has
had all its alarms cleared."
::= { lnSignal 5 }
--Define the traps
lnUnknownEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Unknown severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 0
lnFatalEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Fatal severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 1
lnFailureEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Failure severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 2
lnWarning1EventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Warning1 severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 3
lnWarning2EventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Warning2 severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 4
lnNormalEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Normal severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 5
lnServerUpTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server has come up."
::= 11
lnServerDownTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server has gone down."
::= 12
lnServerPulseFailedTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server is not responding
to the Lotus Notes SNMP agent. The server may have crashed,
or may be busy."
::= 13
lnServerPulseRestoredTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server is now responding
to the Lotus Notes SNMP agent."
::= 14
lnSystemRebootingTrap TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap indicates that the operating system the Notes server is
running has recieved an SNMP reboot request. The system is
now rebooting, this may take up to 5 minutes."
::= 15
lnServerNotRespondingTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server has not responded
to the Lotus Notes SNMP agent for several minutes. There is
a chance that the Notes server may have crashed."
::= 16
lnServerNowRespondingTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server is now responding
to the Lotus Notes SNMP agent after failing to respond for several
minutes. The server may be overloaded."
::= 17
--
--"Alarm" traps generated by NotesView for AIX (or future Unix ports)
--
lnAlarmStatisticThreshold TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when an alarm statistic
threshold is hit."
::= 30
lnAlarmServerStatusChange TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when the alarm status
of the server changes."
::= 31
lnAlarmPortStatusChange TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when the alarm status
of a port changes."
::= 32
lnAlarmTaskStatusChange TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when the alarm status
of a permanent task changes."
::= 33
lnAlarmNVStatClear TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX to indicate that
an alarm statistic threshold condition has been cleared."
::= 34
lnAlarmAutoDiscovery TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX to indicate a discrepancy
between the information that Autodiscovery has detected, and what
the server has reported."
::= 35
lnAlarmServerNotesEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when a Notes
server event occurs."
::= 36
lnAlarmServerCfgChangeEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the server
configuration has changed."
::= 37
lnAlarmMailProbeEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the Mail Probe
task needs to generate an alarm."
::= 38
lnAlarmNSFRemoteConsoleEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the there is an
NSF remote console event."
::= 40
lnAlarmMailBoxEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the there
is a MailBox event."
::= 41
lnAlarmServerSNMPEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the there is an
SNMP event that generates an alarm."
::= 39
lnAlarmClearAll TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap is sent by NotesView for AIX to cause the
alarm manager daemon (nvalarmgrd) to clear all alarms for all
servers and connections. The status of all objects on the map
will be reset to UNKNOWN."
::= 50
lnAlarmClearServers TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle }
DESCRIPTION
"This trap is sent by NotesView for AIX to cause the
alarm manager daemon (nvalarmgrd) to clear all alarms for a given
server or group of servers. The status of all the connections
for each serverId specified in the PDU will also be cleared.
The resulting status of all related objects on the map will
be reset to UNKNOWN."
::= 51
lnSignalAutodiscoveryStart TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap is sent by the NotesView for AIX console when
the Autodiscovery process starts. The NotesView Alarm Manager
daemon (nvalarmgrd) will suspends all Alarm processing until
the Autodiscovery process is complete."
::= 52
lnSignalAutodiscoveryFinished TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap will be used by NotesView for AIX to signal the
Alarm Manager daemon (nvalarmgrd) that the Autodiscovery process
has completed or stopped. Alarm processing will continue at
this point, and all alarms that were received during Autodiscovery
will be processed."
::= 53
lnSignalServerConfigChg TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnSignalServerId, lnSignalOldServerType,
lnSignalNewServerType, lnSignalWhatHasChanged }
DESCRIPTION
"This trap will be used by NotesView for AIX to signal the
Alarm Manager daemon (nvalarmgrd) that there has been
a Notes server configuration change."
::= 54
lnTrapRequestMostSevereStatus TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
needs to be updated with the most severe status of a given object."
::= 55
lnTrapDisplayAlarmClearServers TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnSignalServerId, lnSignalServerName }
DESCRIPTION
"This trap will be generated by the NotesView Alarm Manager in
order to display which server had its alarms cleared as a result
of receiving lnAlarmClearServers (trap type 51). One of these
traps will be generated for each server bound in the PDU for
the lnAlarmClearServers trap. For display only. The Alarm Manager
does not do any processing for this trap."
::= 60
lnTrapDisplayClearedAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a clearing alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 70
lnTrapDisplayIndeterminateAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives an indeterminate alarm from the poller (or console) to
display the alarm information on the NetView event cards. The alarms
are configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 71
lnTrapDisplayWarningAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a warning alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed on the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 72
lnTrapDisplayMinorAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a minor alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 73
lnTrapDisplayCriticalAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a critical alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 74
lnTrapDisplayMajorAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a major alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 75
END
-- Copyright (c) 1994-2003 IBM Corporation
--
--<< Domino-MIB-Version V6.0
--
--References to NotesView are purely historical in nature and should not
--be construed as continued support for NotesView.
--
--Use and restrictions. You are permitted to use, reproduce and distribute
--the Specification and this document ("Document"), provided you comply
--with the following terms.
--
--You shall distribute the Specification and Document with the text of this
--entire copyright notice and agreement. You may not modify, alter or create
--derivatives of the Specification or Document without prior written
--permission from Lotus. You may not loan or license the Specification or
--Document, or any copy.
--
--Ownership. All intellectual property rights in the Specification and
--Document are owned by Lotus or its suppliers and are protected by United
--States and Canadian copyright laws, other applicable copyright laws, and
--international treaty provisions.
--Lotus retains all rights not expressly granted.
--
--No warranty. Lotus is supplying the Specification and Document "as is",
--without warranty, representation, promise or guarantee, either express or
--implied, statutory or otherwise, with respect to the Specification and
--Document, including their quality, performance, merchantability or fitness
--for a particular purpose.
--
--LIMITATION OF LIABILITY
--Because software is inherently complex and may not be completely free of
--errors, it is your responsibility to verify your work and to make backup
--copies, and Lotus will not be responsible for your failure to do so. In
--no event will Lotus be liable for direct, indirect, special, incidental,
--or consequential damages arising out of this Agreement or out of the use
--Lotus products or services, including, without limitation, damages or
--costs relating to the loss of profits, business, goodwill, data or
--computer programs, even if advised of the possibility of such damages. The
--foregoing limitations shall not apply to claims relating to death or
--personal injury which arise out of products deemed to be consumer goods
--under applicable law. Some states or provinces do not allow the exclusion
--or limitation of implied warranties or limitation of liability for
--incidental or consequential damages, so the above exclusion or limitation
--may not apply to you.
--
--For U.S. customers: Should you have any questions concerning this
--Agreement or Lotus software use policies, write to Inside Sales and
--Service, Lotus Development Corporation, 55 Cambridge Parkway,
--Cambridge, MA 02142, or call 1-800-343-5414.
NOTES-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212
DisplayString FROM RFC1213-MIB
TRAP-TYPE FROM RFC-1215;
--Definitions for Lotus enterprise branch and Notes sub-branch
lotus OBJECT IDENTIFIER ::= { enterprises 334 }
notes OBJECT IDENTIFIER ::= { lotus 72 }
notesPump OBJECT IDENTIFIER ::= { lotus 73 }
--Definitions of Notes main groups
lnInfo OBJECT IDENTIFIER ::= { notes 1 }
lnControl OBJECT IDENTIFIER ::= { notes 2 }
lnInterceptor OBJECT IDENTIFIER ::= { notes 3 }
lnUnix OBJECT IDENTIFIER ::= { notes 4 }
mpaInfo OBJECT IDENTIFIER ::= { notes 100 }
--Definitions of sub-groups of the lnInfo group
lnStats OBJECT IDENTIFIER ::= { lnInfo 1 }
--Definitions of sub-groups of the lnStats group
lnMail OBJECT IDENTIFIER ::= { lnStats 4 }
lnReplica OBJECT IDENTIFIER ::= { lnStats 5 }
lnServer OBJECT IDENTIFIER ::= { lnStats 6 }
lnComm OBJECT IDENTIFIER ::= { lnStats 7 }
lnDisk OBJECT IDENTIFIER ::= { lnStats 8 }
lnMem OBJECT IDENTIFIER ::= { lnStats 9 }
lnDatabase OBJECT IDENTIFIER ::= { lnStats 10 }
lnAgentMgr OBJECT IDENTIFIER ::= { lnStats 11 }
lnMTA OBJECT IDENTIFIER ::= { lnStats 12 }
lnWeb OBJECT IDENTIFIER ::= { lnStats 13 }
lnObject OBJECT IDENTIFIER ::= { lnStats 14 }
lnDomino OBJECT IDENTIFIER ::= { lnStats 15 }
lnCalendar OBJECT IDENTIFIER ::= { lnStats 16 }
lnCollector OBJECT IDENTIFIER ::= { lnStats 17 }
lnFT OBJECT IDENTIFIER ::= { lnStats 18 }
lnICM OBJECT IDENTIFIER ::= { lnStats 19 }
lnIMAP OBJECT IDENTIFIER ::= { lnStats 20 }
lnLDAP OBJECT IDENTIFIER ::= { lnStats 21 }
lnMailByDest OBJECT IDENTIFIER ::= { lnStats 22 }
lnMonitor OBJECT IDENTIFIER ::= { lnStats 23 }
lnNNTP OBJECT IDENTIFIER ::= { lnStats 24 }
lnPOP3 OBJECT IDENTIFIER ::= { lnStats 25 }
lnQOS OBJECT IDENTIFIER ::= { lnStats 26 }
lnReporter OBJECT IDENTIFIER ::= { lnStats 27 }
lnSem OBJECT IDENTIFIER ::= { lnStats 28 }
lnSMTP OBJECT IDENTIFIER ::= { lnStats 29 }
lnSMTPMTA OBJECT IDENTIFIER ::= { lnStats 30 }
lnSpin OBJECT IDENTIFIER ::= { lnStats 31 }
--Definitions of sub-groups of the lnServer group
lnServerTask OBJECT IDENTIFIER ::= { lnServer 1 }
lnServerInfo OBJECT IDENTIFIER ::= { lnServer 2 }
lnServerStats OBJECT IDENTIFIER ::= { lnServer 3 }
lnCluster OBJECT IDENTIFIER ::= { lnServer 4 }
--Definitions of sub-groups of the lnCluster group
lnOpenRedirects OBJECT IDENTIFIER ::= { lnCluster 8 }
lnOpenRequest OBJECT IDENTIFIER ::= { lnCluster 9 }
lnClusterTrans OBJECT IDENTIFIER ::= { lnCluster 10 }
--Definitions of sub-groups of the lnReplica group
lnReplicaCluster OBJECT IDENTIFIER ::= { lnReplica 6 }
--Definitions of sub-groups of the lnDomino group
lnDominoInfo OBJECT IDENTIFIER ::= { lnDomino 1 }
lnDominoCmdInfo OBJECT IDENTIFIER ::= { lnDomino 2 }
lnDominoConfig OBJECT IDENTIFIER ::= { lnDomino 3 }
--Define information provided by the Main Proxy Agent.
lnMainProxyAgentVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Information relevant to the Lotus Main SNMP Proxy Agent."
::= { mpaInfo 1 }
--The full (uninterpreted) statistics structure table
lnAllStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnAllStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing a one statistic per entry view of the
entire Notes server statistics structure."
::= { lnStats 1 }
lnAllStatsEntry OBJECT-TYPE
SYNTAX LnAllStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The entry type definition for the lnAllStatsTable."
INDEX { lnStatisticIndex }
::= { lnAllStatsTable 1 }
LnAllStatsEntry ::= SEQUENCE {
lnStatisticIndex INTEGER,
lnStatisticString DisplayString
}
lnStatisticIndex OBJECT-TYPE --<< INDEX *
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each statistic in the Notes server
statistics structure."
::= { lnAllStatsEntry 1 }
lnStatisticString OBJECT-TYPE --<< STRING *
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string describing one statistic from the Notes
Server statistics structure."
::= { lnAllStatsEntry 2 }
--Times related to statistics
lnStatsStartTime OBJECT-TYPE --<< TIME stats.time.start
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time and date at which the statistics agent was
last started. Represented as the number of seconds
since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnStats 2 }
lnStatsCurrentTime OBJECT-TYPE --<< TIME stats.time.current
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time and date of the last statistics update. Represented
as the number of seconds since midnight 1/1/70 GMT
(UNIX epoch)."
::= { lnStats 3 }
lnDeadMail OBJECT-TYPE --<< INT mail.dead
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of dead (undeliverable) mail messages."
::= { lnMail 1 }
lnDeliveredMail OBJECT-TYPE --<< INT mail.delivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messges received by router."
::= { lnMail 2 }
lnTotalMailFailures OBJECT-TYPE --<< INT mail.totalfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of routing failures since the server started."
::= { lnMail 3 }
lnTotalRoutedMail OBJECT-TYPE --<< INT mail.totalrouted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of mail messages routed since the server started."
::= { lnMail 4 }
lnTransferredMail OBJECT-TYPE --<< INT mail.transferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages router attempted to transfer."
::= { lnMail 5 }
lnWaitingMail OBJECT-TYPE --<< INT mail.waiting
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages waiting to be routed."
::= { lnMail 6 }
lnNumWaitingRecipients OBJECT-TYPE --<< INT mail.waitingrecipients
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of pending mail messages awaiting local delivery."
::= { lnMail 7 }
lnMailDomain OBJECT-TYPE --<< STRING mail.domain
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Notes server's mail domain."
::= { lnMail 8 }
lnAverageMailDeliverTime OBJECT-TYPE --<< INT mail.averagedelivertime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average time for mail delivery in seconds."
::= { lnMail 9 }
lnAverageMailServerHops OBJECT-TYPE --<< INT mail.averageserverhops
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average number of server hops for mail delivery."
::= { lnMail 10 }
lnAverageMailSizeDelivered OBJECT-TYPE --<< INT mail.averagesizedelivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average size of mail messages delivered in bytes."
::= { lnMail 11 }
lnMaximumMailDeliverTime OBJECT-TYPE --<< INT mail.maximumdelivertime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum time for mail delivery in seconds."
::= { lnMail 12 }
lnMaximumMailServerHops OBJECT-TYPE --<< INT mail.maximumserverhops
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of server hops for mail delivery."
::= { lnMail 13 }
lnMaximumMailSizeDelivered OBJECT-TYPE --<< INT mail.maximumsizedelivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum size of mail delivered in bytes."
::= { lnMail 14 }
lnMinimumMailDeliverTime OBJECT-TYPE --<< INT mail.minimumdelivertime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum time for mail delivery in seconds."
::= { lnMail 15 }
lnMinimumMailServerHops OBJECT-TYPE --<< INT mail.minimumserverhops
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum number of server hops for mail delivery."
::= { lnMail 16 }
lnMinimumMailSizeDelivered OBJECT-TYPE --<< INT mail.minimumsizedelivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum size of mail delivered in bytes."
::= { lnMail 17 }
lnTotalKBTransferred OBJECT-TYPE --<< INT mail.totalkbtransferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total mail transferred in kilobytes."
::= { lnMail 18 }
lnMailTransferFailures OBJECT-TYPE --<< INT mail.transferfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages the router was unable to transfer."
::= { lnMail 19 }
lnMailDeliveries OBJECT-TYPE --<< INT mail.deliveries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of actual mail items delivered (may be different from
delivered which counts individual messages)."
::= { lnMail 20 }
lnMailHold OBJECT-TYPE --<< INT mail.hold
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages in message queue on hold."
::= { lnMail 21 }
lnMailIMAPCacheMsgInsertAttempts OBJECT-TYPE --<< INT mail.imap.cache.msginsertattempts
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server attempts to insert message in cache."
::= { lnMail 22 }
lnMailIMAPFindCacheAttempted OBJECT-TYPE --<< INT mail.imap.findcacheattempted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of attempts by IMAP server to find message in cache."
::= { lnMail 23 }
lnMailIMAPNumCacheHits OBJECT-TYPE --<< INT mail.imap.numcachehits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages IMAP server found in cache."
::= { lnMail 24 }
lnMailIMAPNumMsgInsertedInCache OBJECT-TYPE --<< INT mail.imap.nummsginsertedincache
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages IMAP server inserted into Cache."
::= { lnMail 25 }
lnMailPeakByteTransferRate OBJECT-TYPE --<< INT mail.peakbytetransferrate
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak transfer rate."
::= { lnMail 26 }
lnMailPeakMessagesTransferred OBJECT-TYPE --<< INT mail.peakmessagestransferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of messages transferred."
::= { lnMail 27 }
lnMailPeakMessageTranferRate OBJECT-TYPE --<< INT mail.peakmessagetranferrate
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak message transfer rate."
::= { lnMail 28 }
lnMailPeakMessageTranferRateTime OBJECT-TYPE --<< TIME mail.peakmessagetranferrate.time
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time of peak message transfer rate."
::= { lnMail 29 }
lnMailPeakTotalBytesTransferred OBJECT-TYPE --<< INT mail.peaktotalbytestransfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Highest number of bytes transferred."
::= { lnMail 30 }
lnMailTotalPending OBJECT-TYPE --<< INT mail.totalpending
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages pending."
::= { lnMail 31 }
lnMailTotalRoutedSMTP OBJECT-TYPE --<< INT mail.totalrouted.smtp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages moved from MAIL.BOX via SMTP."
::= { lnMail 32 }
lnMailTotalRouterNRPC OBJECT-TYPE --<< INT mail.totalrouter.nrpc
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages moved from MAIL.BOX via NRPC."
::= { lnMail 33 }
lnMailWaitingforDNS OBJECT-TYPE --<< INT mail.waitingfordns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of mail messages in MAIL.BOX waiting for DNS."
::= { lnMail 34 }
lnRepDocsAdded OBJECT-TYPE --<< INT replica.docs.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of docs added via replication since server was started."
::= { lnReplica 1 }
lnRepDocsDeleted OBJECT-TYPE --<< INT replica.docs.deleted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of docs deleted via replication since server was started."
::= { lnReplica 2 }
lnRepDocsUpdated OBJECT-TYPE --<< INT replica.docs.updated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of docs updated via replication since server was started."
::= { lnReplica 3 }
lnRepFailed OBJECT-TYPE --<< INT replica.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of replications that generated an error."
::= { lnReplica 4 }
lnRepSuccessful OBJECT-TYPE --<< INT replica.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of successful replications."
::= { lnReplica 5 }
lnRepClusterDocsAdded OBJECT-TYPE --<< INT replica.cluster.docs.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of documents added by the cluster replicator."
::= { lnReplicaCluster 1 }
lnRepClusterDocsDeleted OBJECT-TYPE --<< INT replica.cluster.docs.deleted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of documents deleted by the cluster replicator."
::= { lnReplicaCluster 2 }
lnRepClusterDocsUpdated OBJECT-TYPE --<< INT replica.cluster.docs.updated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of documents updated by the cluster replicator."
::= { lnReplicaCluster 3 }
lnRepClusterFailed OBJECT-TYPE --<< INT replica.cluster.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of failed replications since server startup."
::= { lnReplicaCluster 4 }
lnRepClusterFilesLocal OBJECT-TYPE --<< INT replica.cluster.files.local
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases on the current server for which
there are replicas on other servers in the cluster."
::= { lnReplicaCluster 5 }
lnRepClusterFilesRemote OBJECT-TYPE --<< INT replica.cluster.files.remote
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases on other servers to which the
cluster replicator pushes changes."
::= { lnReplicaCluster 6 }
lnRepClusterRetrySkipped OBJECT-TYPE --<< INT replica.cluster.retry.skipped
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times the cluster replicator did not attempt
to replicate a database. The retry is skipped when the
destination server is known to be unreachable, or the database
is waiting for another retry attempt."
::= { lnReplicaCluster 7 }
lnRepClusterRetryWaiting OBJECT-TYPE --<< INT replica.cluster.retry.waiting
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of replicas that are waiting for retry attempts."
::= { lnReplicaCluster 8 }
lnRepClusterSecondsOnQueue OBJECT-TYPE --<< INT replica.cluster.secondsonqueue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The amount of time in seconds that the last database
replicated spent on the work queue."
::= { lnReplicaCluster 9 }
lnRepClusterSecondsOnQueueAvg OBJECT-TYPE --<< INT replica.cluster.secondsonqueue.avg
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The average amount of time in seconds that a database
spent on the work queue."
::= { lnReplicaCluster 10 }
lnRepClusterSecondsOnQueueMax OBJECT-TYPE --<< INT replica.cluster.secondsonqueue.max
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum amount of time in seconds that a database
spent on the work queue."
::= { lnReplicaCluster 11 }
lnRepClusterServers OBJECT-TYPE --<< INT replica.cluster.servers
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of other servers in the cluster that are receiving
replications from this server."
::= { lnReplicaCluster 12 }
lnRepClusterSessionBytesIn OBJECT-TYPE --<< INT replica.cluster.sessionbytes.in
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of bytes received during cluster replication."
::= { lnReplicaCluster 13 }
lnRepClusterSessionBytesOut OBJECT-TYPE --<< INT replica.cluster.sessionbytes.out
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of bytes sent during cluster replication."
::= { lnReplicaCluster 14 }
lnRepClusterSuccessful OBJECT-TYPE --<< INT replica.cluster.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of successful replications since server startup."
::= { lnReplicaCluster 15 }
lnRepClusterWorkQueueDepth OBJECT-TYPE --<< INT replica.cluster.workqueuedepth
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current number of databases awaiting replication by
the cluster replicator."
::= { lnReplicaCluster 16 }
lnRepClusterWorkQueueDepthAvg OBJECT-TYPE --<< INT replica.cluster.workqueuedepth.avg
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The average work queue depth since server startup."
::= { lnReplicaCluster 17 }
lnRepClusterWorkQueueDepthMax OBJECT-TYPE --<< INT replica.cluster.workqueuedepth.max
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum depth reached by the work queue since server startup."
::= { lnReplicaCluster 18 }
lnReplicaClusterCachedHandles OBJECT-TYPE --<< INT replica.cluster.cachedhandles
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of handles cached by cluster."
::= { lnReplicaCluster 19 }
lnTaskCount OBJECT-TYPE --<< INT server.tasks
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of Notes server tasks currently executing."
::= { lnServerTask 1 }
lnTaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnTaskEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each Notes server
task that is actually running."
::= { lnServerTask 2 }
lnTaskEntry OBJECT-TYPE
SYNTAX LnTaskEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnTaskTable."
INDEX { lnTaskIndex }
::= { lnTaskTable 1 }
LnTaskEntry ::= SEQUENCE {
lnTaskIndex INTEGER,
lnTaskType INTEGER,
lnTaskData DisplayString,
lnTaskName DisplayString
}
lnTaskIndex OBJECT-TYPE --<< INDEX server.task
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnTaskTable."
::= { lnTaskEntry 1 }
lnTaskType OBJECT-TYPE --<< TASKtype server.task
SYNTAX INTEGER {
databaseServer(1),
event(2),
reporter(3),
replicator(4),
indexer(5),
router(6),
eventInterceptor(7),
querySetHandler(8),
reflectorAgent(9),
webRetriever(10),
calendarConnector(11),
scheduleManager(12),
unknownAddin(13),
adminProcess(14),
httpWebServer(15),
chronos(16),
collector(17),
inotes(18),
billing(19),
clusterReplicator(20),
clusterDbDirMgr(21),
clusterAdmin(22),
agentManager(23),
cataloger(24),
databaseCompactor(25),
designer(26),
objectStoreMgr(27),
pop3Server(28),
statistics(29),
stats(30),
databaseFixup(31),
inNews(32),
webPublisher(33),
ccMailMTA(34),
smtpMTA(35),
x400MTA(36),
ldapServer(37),
nntpServer(38),
imapServer(39),
imap4Server(40)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The type of server task being represented by this entry."
::= { lnTaskEntry 2 }
lnTaskData OBJECT-TYPE --<< TASKdata server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Information associated with this task entry. See the
description for lnTaskType."
::= { lnTaskEntry 3 }
lnTaskName OBJECT-TYPE --<< TASKname server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The actual name of the task as it appears in the
SERVER.TASK statistic on the server."
::= { lnTaskEntry 4 }
lnReplicatorStatus OBJECT-TYPE --<< TASKreplicator server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of the Replicator task. Provided as a separate MIB
variable for the sake of efficiency."
::= { lnServerTask 3 }
lnRouterStatus OBJECT-TYPE --<< TASKrouter server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of the Router task. Provided as a separate MIB
variable for the sake of efficiency."
::= { lnServerTask 4 }
lnEventStatus OBJECT-TYPE --<< TASKevent server.task
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of the Event task. Provided as a separate MIB
variable for the sake of efficiency."
::= { lnServerTask 5 }
lnServerName OBJECT-TYPE --<< STRING server.name
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Server Name."
::= { lnServerInfo 1 }
lnServerTitle OBJECT-TYPE --<< STRING server.title
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Title assigned to this server."
::= { lnServerInfo 2 }
lnServerAdministrators OBJECT-TYPE --<< STRING server.administrator
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Contents of Administrator field from server record in
Public Address book."
::= { lnServerInfo 3 }
lnServerNotesVersion OBJECT-TYPE --<< STRING server.version.notes
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Release of the Notes server that is running."
::= { lnServerInfo 4 }
lnServerSystemVersion OBJECT-TYPE --<< STRING server.version.os
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Release of the Operating System running on the server."
::= { lnServerInfo 5 }
lnServerBootID OBJECT-TYPE --<< INT server.bootid
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Unique number identifying the time this server was last booted."
::= { lnServerInfo 6 }
lnServerDataPath OBJECT-TYPE --<< STRING server.path.data
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Drive and directory defined as this server's data directory."
::= { lnServerInfo 7 }
lnServerSwapPath OBJECT-TYPE --<< STRING server.path.swap
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Drive and directory for this server's swap file
(NOTE: this stat relies on the NOTES.INI variable
'SWAPPATH' if config.sys contains a swap path
different from the default.)"
::= { lnServerInfo 8 }
lnServerRS232Ports OBJECT-TYPE --<< INT server.ports.rs232
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of RS232 ports on this server."
::= { lnServerInfo 9 }
lnServerCoprocessor OBJECT-TYPE --<< BOOL server.coprocessor
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Returns 'Yes', if server is a 486 or 386 w/ 387,
otherwise, Returns 'No'."
::= { lnServerInfo 10 }
lnServerOS OBJECT-TYPE -- Internally implemented.
SYNTAX INTEGER {
os2(1),
netWare(2),
windowsNT(3),
unix(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Operating System the current Notes server is running."
::= { lnServerInfo 11 }
lnServerCPUCount OBJECT-TYPE --<< INT server.cpu.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of processors installed on this server."
::= { lnServerInfo 12 }
lnServerCPUType OBJECT-TYPE --<< STRING server.cpu.type
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The type of processor installed on the server (386,486, Pentium, etc)."
::= { lnServerInfo 13 }
lnServerUsersTable OBJECT-TYPE -- Never implemented.
SYNTAX SEQUENCE OF LnServerUsersEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A table containing one entry for each Notes user on the server."
::= { lnServerInfo 14 }
lnServerPorts OBJECT-TYPE --<< STRING server.ports
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A list of ports on the server."
::= { lnServerInfo 15 }
lnServerPoweredBy OBJECT-TYPE --<< STRING server.poweredby
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Indicates what is powering the Domino server. A value here
would indicate the system is running Release 4.5 or better
of the Domino server. Value should = Notes."
::= { lnServerInfo 16 }
lnServerDescription OBJECT-TYPE --<< STRING server.description
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Server's one line description from server's Name & Address book entry."
::= { lnServerInfo 17 }
lnServerLocation OBJECT-TYPE --<< STRING server.location
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Physical location of server."
::= { lnServerInfo 18 }
lnServerUsersEntry OBJECT-TYPE -- Never implemented.
SYNTAX LnServerUsersEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The entry type definition for the lnServerUsersTable."
INDEX { lnServerUsersIndex }
::= { lnServerUsersTable 1 }
LnServerUsersEntry ::= SEQUENCE {
lnServerUsersIndex INTEGER,
lnServerUserName DisplayString,
lnServerUserSessionID DisplayString,
lnServerUserAccessedDBs INTEGER
}
lnServerUsersIndex OBJECT-TYPE -- Never implemented.
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"A unique value for each entry in lnServerUsersTable."
::= { lnServerUsersEntry 1 }
lnServerUserName OBJECT-TYPE -- Never implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Notes UserName of server user."
::= { lnServerUsersEntry 2 }
lnServerUserSessionID OBJECT-TYPE -- Never implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The user's Notes session ID."
::= { lnServerUsersEntry 3 }
lnServerUserAccessedDBs OBJECT-TYPE -- Never implemented.
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of databases accessed by the users."
::= { lnServerUsersEntry 4 }
lnServerDroppedSessions OBJECT-TYPE --<< INT server.sessions.dropped
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of dropped sessions."
::= { lnServerStats 1 }
lnServerTransPerMin OBJECT-TYPE --<< INT server.trans.perminute
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average number of transactions per minute since the
server was started."
::= { lnServerStats 2 }
lnServerTransPerMinPeak OBJECT-TYPE --<< INT server.trans.perminute.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of transactions that took place in any
given minute since the server was started."
::= { lnServerStats 3 }
lnServerTransPerMinPeakTime OBJECT-TYPE --<< TIME server.trans.perminute.peak.time
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of transactions
per minute was last reached. Represented as the number
of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 4 }
lnServerTransTotal OBJECT-TYPE --<< INT server.trans.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of transactions the server has completed
since it was started."
::= { lnServerStats 5 }
lnServerUsers OBJECT-TYPE --<< INT server.users
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of users with sessions open on the server."
::= { lnServerStats 6 }
lnServerUsers1MinPeak OBJECT-TYPE --<< INT server.users.1minpeak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent users active within the last minute."
::= { lnServerStats 7 }
lnServerUsers1MinPeakTime OBJECT-TYPE --<< TIME server.users.1minpeaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of active concurrent
users were reached within the last minute. Represented as
the number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 8 }
lnServerUsers5MinPeak OBJECT-TYPE --<< INT server.users.5minpeak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent users that were active
within the last five minutes."
::= { lnServerStats 9 }
lnServerUsers5MinPeakTime OBJECT-TYPE --<< TIME server.users.5minpeaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of active concurrent
users were reached within the last five minutes. Represented
as the number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 10 }
lnServerUsersPeak OBJECT-TYPE --<< INT server.users.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent users with open sessions
since the server was started."
::= { lnServerStats 11 }
lnServerUsersPeakTime OBJECT-TYPE --<< TIME server.users.peak.time
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Date and time when the peak number of concurrent users
with open sessions was last reached. Represented as the
number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnServerStats 12 }
lnServerOpenReqMaxUsers OBJECT-TYPE --<< INT server.openrequest.maxusers
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times that a client has attempted to open
a database on this server when the server was at its
MAXUSERS limit."
::= { lnServerStats 13 }
lnServerOpenReqPreV4Client OBJECT-TYPE --<< INT server.openrequest.prev4client
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times Notes Release 4.0 (or higher)
clients have attempted to open a database on this server."
::= { lnServerStats 14 }
lnServerOpenReqRestricted OBJECT-TYPE --<< INT server.openrequest.restricted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times that a client has attempted to open
a database on this server when the server was RESTRICTED."
::= { lnServerStats 15 }
lnServerOpenReqV4Client OBJECT-TYPE --<< INT server.openrequest.v4client
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times Notes Clients post Release 4.0 have
attempted to open a database on this server."
::= { lnServerStats 16 }
lnServerBusyTimeQueryReceivedCount OBJECT-TYPE --<< INT server.busytimequery.receivedcount
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of external 'busytime' queries the server has received."
::= { lnServerStats 17 }
lnServerBusyTimeQueryRetObjSched OBJECT-TYPE --<< INT server.busytimequery.returned.objects.schedules
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of schedules that were returned by queries counted
by lnServerBusyTimeQueriesReceivedCount."
::= { lnServerStats 18 }
lnServerAvailabilityIndex OBJECT-TYPE --<< INT server.availabilityindex
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current percentage index of a server's availability. Value
range is 0-100. Zero (0) indicates no available resources;
a value of 100 indicates server completely available."
::= { lnServerStats 19 }
lnServerAvailabilityThreshold OBJECT-TYPE --<< INT server.availabilitythreshold
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current setting of a server's availability threshold. When
a server's availability index drops below its availability
threshold, the server becomes BUSY."
::= { lnServerStats 20 }
lnServerMinIdleDisconnect OBJECT-TYPE --<< INT server.minidledisconnect
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum number of minutes for disconnect."
::= { lnServerStats 21 }
lnServerMinIdleDisconnectTime OBJECT-TYPE --<< TIME server.minidledisconnect.time
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time at which minimum number of minutes for disconnect happened."
::= { lnServerStats 22 }
lnServerMonitorStart OBJECT-TYPE --<< TIME server.monitor.start
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time at which server monitor started."
::= { lnServerStats 23 }
lnServerTimeStart OBJECT-TYPE --<< TIME server.time.start
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time at which server was started."
::= { lnServerStats 24 }
lnServerWorkThreads OBJECT-TYPE --<< INT server.workthreads
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of concurrent transactions to create."
::= { lnServerStats 25 }
lnNumClosedOldSessions OBJECT-TYPE --<< INT comm.numoldsessionsclosed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of sessions dropped because of too many concurrent users."
::= { lnComm 1 }
lnNetbiosTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNetbiosEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each active NetBIOS
port on the server. Notes R3 only."
::= { lnComm 2 }
lnNetbiosEntry OBJECT-TYPE
SYNTAX LnNetbiosEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNetbiosTable, Notes R3."
INDEX { lnNBIndex }
::= { lnNetbiosTable 1 }
LnNetbiosEntry ::= SEQUENCE {
lnNBIndex INTEGER,
lnNBPort DisplayString,
lnNBUnitNumber INTEGER,
lnNBMajVersion INTEGER,
lnNMMinVersion INTEGER,
lnNBReportPeriod INTEGER,
lnNBInUseSessions INTEGER,
lnNBMaxSessions INTEGER,
lnNBAvailCmdBlocks INTEGER,
lnNBTotalCmdBlocks INTEGER,
lnNBPacketSize INTEGER,
lnNBReceivedPackets INTEGER,
lnNBSentPackets INTEGER,
lnNBAbortedTransmissions INTEGER,
lnNBRetriedTransmissions INTEGER,
lnNBAlignmentErrors INTEGER,
lnNBCollisionErrors INTEGER,
lnNBCRCErrors INTEGER,
lnNBReceiverResourcesExhausted INTEGER
}
lnNBIndex OBJECT-TYPE --<< INDEX netbios.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnNetbiosTable."
::= { lnNetbiosEntry 1 }
lnNBPort OBJECT-TYPE --<< NAME netbios.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"NetBIOS port associated with this table entry."
::= { lnNetbiosEntry 2 }
lnNBUnitNumber OBJECT-TYPE --<< INT netbios.*.unit.num
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Unit number for this NetBIOS port."
::= { lnNetbiosEntry 3 }
lnNBMajVersion OBJECT-TYPE --<< INT netbios.*.version.major
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Major version number of the NetBIOS driver being run on this port."
::= { lnNetbiosEntry 4 }
lnNMMinVersion OBJECT-TYPE --<< INT netbios.*.version.minor
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minor version number of the NetBIOS driver being run on this port."
::= { lnNetbiosEntry 5 }
lnNBReportPeriod OBJECT-TYPE --<< INT netbios.*.reportperiodminutes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Period of time over which the statistics for this port have
been accumulating."
::= { lnNetbiosEntry 6 }
lnNBInUseSessions OBJECT-TYPE --<< INT netbios.*.sessions.inuse
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NetBIOS sessions currently in use."
::= { lnNetbiosEntry 7 }
lnNBMaxSessions OBJECT-TYPE --<< INT netbios.*.sessions.maximum
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of concurrent NetBIOS sessions
configured for this port."
::= { lnNetbiosEntry 8 }
lnNBAvailCmdBlocks OBJECT-TYPE --<< INT netbios.*.commandblocks.available
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of NetBIOS command blocks which are
currently available for use."
::= { lnNetbiosEntry 9 }
lnNBTotalCmdBlocks OBJECT-TYPE --<< INT netbios.*.commandblocks.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of NetBIOS command blocks configured for this port."
::= { lnNetbiosEntry 10 }
lnNBPacketSize OBJECT-TYPE --<< INT netbios.*.session.datapacketsize
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Packet size for this NetBIOS port (in bytes)."
::= { lnNetbiosEntry 11 }
lnNBReceivedPackets OBJECT-TYPE --<< INT netbios.*.packets.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of packets received by this port."
::= { lnNetbiosEntry 12 }
lnNBSentPackets OBJECT-TYPE --<< INT netbios.*.packets.transmitted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of packets sent from this port."
::= { lnNetbiosEntry 13 }
lnNBAbortedTransmissions OBJECT-TYPE --<< INT netbios.*.transmissions.aborted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of aborted transmissions for this port."
::= { lnNetbiosEntry 14 }
lnNBRetriedTransmissions OBJECT-TYPE --<< INT netbios.*.transmissions.retried
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retried transmissions for this port."
::= { lnNetbiosEntry 15 }
lnNBAlignmentErrors OBJECT-TYPE --<< INT netbios.*.errors.alignment
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of alignment errors for this port."
::= { lnNetbiosEntry 16 }
lnNBCollisionErrors OBJECT-TYPE --<< INT netbios.*.errors.collisions
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of collision errors for this port."
::= { lnNetbiosEntry 17 }
lnNBCRCErrors OBJECT-TYPE --<< INT netbios.*.errors.crc
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of checksum errors for this port."
::= { lnNetbiosEntry 18 }
lnNBReceiverResourcesExhausted OBJECT-TYPE --<< INT netbios.*.receiver.resources.exhausted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of exhausted NetBios resources."
::= { lnNetbiosEntry 19 }
lnXPCTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnXPCEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each active XPC port on the server."
::= { lnComm 3 }
lnXPCEntry OBJECT-TYPE
SYNTAX LnXPCEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnXPCTable."
INDEX { lnXPCIndex }
::= { lnXPCTable 1 }
LnXPCEntry ::= SEQUENCE {
lnXPCIndex INTEGER,
lnXPCPort DisplayString,
lnXPCStatus DisplayString,
lnXPCCarrierSpeed INTEGER,
lnXPCPortSpeed INTEGER,
lnXPCActiveSessions INTEGER,
lnXPCKiloBytesReceived INTEGER,
lnXPCKiloBytesSent INTEGER,
lnXPCMsgsReceived INTEGER,
lnXPCMsgsSent INTEGER,
lnXPCCRCErrors INTEGER,
lnXPCPortErrors INTEGER,
lnXPCRetransmissions INTEGER
}
lnXPCIndex OBJECT-TYPE --<< INDEX xpc.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnXPCTable."
::= { lnXPCEntry 1 }
lnXPCPort OBJECT-TYPE --<< NAME xpc.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"XPC port associated with this table entry."
::= { lnXPCEntry 2 }
lnXPCStatus OBJECT-TYPE --<< STRING xpc.*.status
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The status of this XPC port."
::= { lnXPCEntry 3 }
lnXPCCarrierSpeed OBJECT-TYPE --<< INT xpc.*.speed.carrier
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Communication speed (in bits per second) between
local modem and remote modem."
::= { lnXPCEntry 4 }
lnXPCPortSpeed OBJECT-TYPE --<< INT xpc.*.speed.port
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Communication speed (in bits per second) between
server and local modem."
::= { lnXPCEntry 5 }
lnXPCActiveSessions OBJECT-TYPE --<< INT xpc.*.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of active user sessions on this XPC port."
::= { lnXPCEntry 6 }
lnXPCKiloBytesReceived OBJECT-TYPE --<< INT xpc.*.userbytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of kilobytes received by this port."
::= { lnXPCEntry 7 }
lnXPCKiloBytesSent OBJECT-TYPE --<< INT xpc.*.userbytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of kilobytes sent by this port."
::= { lnXPCEntry 8 }
lnXPCMsgsReceived OBJECT-TYPE --<< INT xpc.*.usermsgs.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages received by this port."
::= { lnXPCEntry 9 }
lnXPCMsgsSent OBJECT-TYPE --<< INT xpc.*.usermsgs.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of messages sent by this port."
::= { lnXPCEntry 10 }
lnXPCCRCErrors OBJECT-TYPE --<< INT xpc.*.errors.crc
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of checksum errors from this port."
::= { lnXPCEntry 11 }
lnXPCPortErrors OBJECT-TYPE --<< INT xpc.*.errors.port
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of port errors."
::= { lnXPCEntry 12 }
lnXPCRetransmissions OBJECT-TYPE --<< INT xpc.*.errors.retransmittedpackets
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retransmissions from this port."
::= { lnXPCEntry 13 }
lnAppleTalkStatsLogged OBJECT-TYPE --<< INT comm.appletalk.appletalk.statslogged
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of AppleTalk statistics logged by the Notes server."
::= { lnComm 4 }
lnNetWareSPXIIStatsLogged OBJECT-TYPE --<< INT comm.netware.spxii.statslogged
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NetWare SPX II statistics logged by the Notes server."
::= { lnComm 5 }
lnNetPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNetPortEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each configured Notes network
port on the server. This table is new to the MIB as of Notes
Release 4. This table replaces most of the lnComm variables,
remaining for backward compatibility, found in Release 3 of Notes."
::= { lnComm 6 }
lnNetPortEntry OBJECT-TYPE
SYNTAX LnNetPortEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNetPortTable.
This is specific to Notes Release 4."
INDEX { lnNetPortIndex }
::= { lnNetPortTable 1 }
LnNetPortEntry ::= SEQUENCE {
lnNetPortIndex INTEGER,
lnNetPortName DisplayString,
lnNetPortKBytesRec INTEGER,
lnNetPortKBytesSent INTEGER,
lnNetPortSessEstIn INTEGER,
lnNetPortSessEstOut INTEGER,
lnNetPortSessLimit INTEGER,
lnNetPortSessLimitMax INTEGER,
lnNetPortSessLimitMin INTEGER,
lnNetPortSessPeak INTEGER,
lnNetPortSessRecycled INTEGER,
lnNetPortSessRecycling INTEGER,
lnSNARemoteLU INTEGER,
lnSNALocalLU INTEGER,
lnSNALNCVersion INTEGER,
lnSNAVersion INTEGER,
lnSNAMaxSessions INTEGER,
lnSNAActiveSessions INTEGER,
lnSNATPType INTEGER,
lnSNATPState INTEGER,
lnSNAConversationId INTEGER,
lnSNAMaxSendRUSize INTEGER,
lnSNAMaxRcvRUSize INTEGER,
lnSNASendPacingSize INTEGER,
lnSNARcvPacingSize INTEGER,
lnSNAPacingType INTEGER,
lnX25LocalResets INTEGER,
lnX25RemoteResets INTEGER,
lnX25WindowSize INTEGER,
lnX25FrameSize INTEGER,
lnX25PktSize INTEGER,
lnX25UnderRuns INTEGER,
lnX25OverRuns INTEGER,
lnX25REJTran INTEGER,
lnX25REJRcv INTEGER,
lnX25VCCfg INTEGER,
lnX25VCInUse INTEGER,
lnX25CRCErrors INTEGER,
lnX25LocalDTEAddress INTEGER
}
lnNetPortIndex OBJECT-TYPE --<< INDEX net.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnPortTable."
::= { lnNetPortEntry 1 }
lnNetPortName OBJECT-TYPE --<< NAME net.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The port name associate with this entry."
::= { lnNetPortEntry 2 }
lnNetPortKBytesRec OBJECT-TYPE --<< KINT net.*.bytesreceived
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes received on this port.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnNetPortEntry 3 }
lnNetPortKBytesSent OBJECT-TYPE --<< KINT net.*.bytessent
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes sent on this port.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnNetPortEntry 4 }
lnNetPortSessEstIn OBJECT-TYPE --<< INT net.*.sessions.established.incoming
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of inbound sessions established on this port."
::= { lnNetPortEntry 5 }
lnNetPortSessEstOut OBJECT-TYPE --<< INT net.*.sessions.established.outgoing
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of outbound sessions established on this port."
::= { lnNetPortEntry 6 }
lnNetPortSessLimit OBJECT-TYPE --<< INT net.*.sessions.limit
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current limit on the number of concurrent sessions on the port."
::= { lnNetPortEntry 7 }
lnNetPortSessLimitMax OBJECT-TYPE --<< INT net.*.sessions.limitmax
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Upward boundary of the range in which lnPortSessLimit may vary."
::= { lnNetPortEntry 8 }
lnNetPortSessLimitMin OBJECT-TYPE --<< INT net.*.sessions.limitmin
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Lower boundary of the range in which lnPortSessLimit may vary."
::= { lnNetPortEntry 9 }
lnNetPortSessPeak OBJECT-TYPE --<< INT net.*.sessions.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of concurrent sessions on this port."
::= { lnNetPortEntry 10 }
lnNetPortSessRecycled OBJECT-TYPE --<< INT net.*.sessions.recycled
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of dropped sessions due to low network resources."
::= { lnNetPortEntry 11 }
lnNetPortSessRecycling OBJECT-TYPE --<< INT net.*.sessions.recycling
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of sessions currently being dropped due to low
network resources."
::= { lnNetPortEntry 12 }
lnSNARemoteLU OBJECT-TYPE --<< INT net.*.remotelu
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Remote LU."
::= { lnNetPortEntry 13 }
lnSNALocalLU OBJECT-TYPE --<< INT net.*.locallu
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Local LU."
::= { lnNetPortEntry 14 }
lnSNALNCVersion OBJECT-TYPE --<< INT net.*.lncversion
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA LNC Version."
::= { lnNetPortEntry 15 }
lnSNAVersion OBJECT-TYPE --<< INT net.*.version
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA Version."
::= { lnNetPortEntry 16 }
lnSNAMaxSessions OBJECT-TYPE --<< INT net.*.maxsessions
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum number of SNA sessions that can exist."
::= { lnNetPortEntry 17 }
lnSNAActiveSessions OBJECT-TYPE --<< INT net.*.activesessions
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of active SNA sessions."
::= { lnNetPortEntry 18 }
lnSNATPType OBJECT-TYPE --<< INT net.*.tptype
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA transaction program type."
::= { lnNetPortEntry 19 }
lnSNATPState OBJECT-TYPE --<< INT net.*.tpstate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA transaction program state."
::= { lnNetPortEntry 20 }
lnSNAConversationId OBJECT-TYPE --<< INT net.*.conversationid
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SNA conversation ID."
::= { lnNetPortEntry 21 }
lnSNAMaxSendRUSize OBJECT-TYPE --<< INT net.*.maxsendrusize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum send request unit size sent."
::= { lnNetPortEntry 22 }
lnSNAMaxRcvRUSize OBJECT-TYPE --<< INT net.*.maxrcvrusize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum send request unit size received."
::= { lnNetPortEntry 23 }
lnSNASendPacingSize OBJECT-TYPE --<< INT net.*.sendpacingsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of outstanding request units which can
be transmitted before receiving a pacing response from the
remote LU."
::= { lnNetPortEntry 24 }
lnSNARcvPacingSize OBJECT-TYPE --<< INT net.*.rcvcpacingsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of oustanding request units which can
be received before transmitting a pacing response to the
remote LU."
::= { lnNetPortEntry 25 }
lnSNAPacingType OBJECT-TYPE --<< INT net.*.pacingtype
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The SNA pacing size was originally determined at the creation
of a session and remained constant through the life of the
session. More recent implementations allow the pacing size
to dynamically change through the life of the session to increase
efficiency and take advantage of available buffers. This number
represents the type of pacing done."
::= { lnNetPortEntry 26 }
lnX25LocalResets OBJECT-TYPE --<< INT net.*.localresets
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of local resets on this X25 port."
::= { lnNetPortEntry 27 }
lnX25RemoteResets OBJECT-TYPE --<< INT net.*.remoteresets
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of remote resets on this X25 port."
::= { lnNetPortEntry 28 }
lnX25WindowSize OBJECT-TYPE --<< INT net.*.windowsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The window size on this X25 port."
::= { lnNetPortEntry 29 }
lnX25FrameSize OBJECT-TYPE --<< INT net.*.framesize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The network frame size on this X25 port."
::= { lnNetPortEntry 30 }
lnX25PktSize OBJECT-TYPE --<< INT net.*.pktsize
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The network packet size on this X25 port."
::= { lnNetPortEntry 31 }
lnX25UnderRuns OBJECT-TYPE --<< INT net.*.underruns
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This occurs when data is not given to the UART on an X.25 board
fast enough for it to generate a complete packet on the wire."
::= { lnNetPortEntry 32 }
lnX25OverRuns OBJECT-TYPE --<< INT net.*.overruns
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This occurs when data is given to the UART on an X.25 board
faster than the board can generate packets to put on the wire."
::= { lnNetPortEntry 33 }
lnX25REJTran OBJECT-TYPE --<< INT net.*.rejtran
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of REJs transmitted by this X25 port."
::= { lnNetPortEntry 34 }
lnX25REJRcv OBJECT-TYPE --<< INT net.*.rejrcv
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of REJs received by this X25 port."
::= { lnNetPortEntry 35 }
lnX25VCCfg OBJECT-TYPE --<< INT net.*.vccfg
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of virtual circuits configured on this X25 port."
::= { lnNetPortEntry 36 }
lnX25VCInUse OBJECT-TYPE --<< INT net.*.vcinuse
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of virtual circuits currently in use on this X25 port."
::= { lnNetPortEntry 37 }
lnX25CRCErrors OBJECT-TYPE --<< INT net.*.crcerrors
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The remote DTE address on this X25 port."
::= { lnNetPortEntry 38 }
lnX25LocalDTEAddress OBJECT-TYPE --<< INT net.*.localdteaddress
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The local DTE address on this X25 port."
::= { lnNetPortEntry 39 }
lnNetLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNetLogEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about unwritten log notes."
::= { lnComm 7 }
lnNetLogEntry OBJECT-TYPE
SYNTAX LnNetLogEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNetLogTable."
INDEX { lnNetLogIndex }
::= { lnNetLogTable 1 }
LnNetLogEntry ::= SEQUENCE {
lnNetLogIndex INTEGER,
lnNetLogName DisplayString,
lnNETLogUnwrittenEntries INTEGER
}
lnNetLogIndex OBJECT-TYPE --<< INDEX net.log.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnNetLogTable."
::= { lnNetLogEntry 1 }
lnNetLogName OBJECT-TYPE --<< NAME net.log.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the user."
::= { lnNetLogEntry 2 }
lnNETLogUnwrittenEntries OBJECT-TYPE --<< INT net.log.*.unwrittenentries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of unwritten log notes waiting to be written."
::= { lnNetLogEntry 3 }
lnDiskFixed OBJECT-TYPE --<< INT disk.fixed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of fixed disks configured on this server."
::= { lnDisk 1 }
lnDiskFreeSwap OBJECT-TYPE --<< INT disk.swapdisk.free
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Amount of free space left in swap area (in kilobytes)."
::= { lnDisk 2 }
lnDriveTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnDriveEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each disk (including
network disks) configured on the server."
::= { lnDisk 3 }
lnDiskRemote OBJECT-TYPE --<< INT disk.remote
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of network disks or volumes mounted."
::= { lnDisk 4 }
lnDriveEntry OBJECT-TYPE
SYNTAX LnDriveEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnDriveTable."
INDEX { lnDriveIndex }
::= { lnDriveTable 1 }
LnDriveEntry ::= SEQUENCE {
lnDriveIndex INTEGER,
lnDriveLetter DisplayString,
lnDriveSize INTEGER,
lnDriveFree INTEGER
}
lnDriveIndex OBJECT-TYPE --<< INDEX disk.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in lnDriveTable."
::= { lnDriveEntry 1 }
lnDriveLetter OBJECT-TYPE --<< NAME disk.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The drive letter of the disk associated with this entry."
::= { lnDriveEntry 2 }
lnDriveSize OBJECT-TYPE --<< KINT disk.*.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total size of this drive in kilobytes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDriveEntry 3 }
lnDriveFree OBJECT-TYPE --<< KINT disk.*.free
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The amount of free space left on this drive in kilobytes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDriveEntry 4 }
lnMemAllocTotal OBJECT-TYPE --<< INT mem.allocated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total memory allocated (should be sum of process and shared)."
::= { lnMem 1 }
lnMemAllocProcess OBJECT-TYPE --<< INT mem.allocated.process
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total process-private memory allocated by all
currently-running processes."
::= { lnMem 2 }
lnMemAllocShared OBJECT-TYPE --<< INT mem.allocated.shared
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total shared memory allocated."
::= { lnMem 3 }
lnMemAvailability OBJECT-TYPE --<< STRING mem.availability
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Available memory on this server."
::= { lnMem 4 }
lnMemFree OBJECT-TYPE --<< KINT mem.free
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total free memory, reported in kilobytes, as shown
in the MEM.FREE Notes statistic.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnMem 5 }
lnMemSwapSize OBJECT-TYPE --<< INT mem.swapfile.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of swap file (NOTE: this stat relies on the NOTES.INI
variable 'SWAPPATH' if config.sys contains a swap
path different from the default.)"
::= { lnMem 6 }
lnMemPhysicalRAM OBJECT-TYPE --<< INT mem.physicalram
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total amount of physical memory on the server."
::= { lnMem 7 }
lnMemFTVDKMaxBufferSizeUsed OBJECT-TYPE --<< INT mem.ftvdkmaxbuffersizeused
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"FTVDK Max buffer size used."
::= { lnMem 8 }
lnMemQuota OBJECT-TYPE --<< INT mem.quota
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum memory that can be allocated by the server."
::= { lnMem 9 }
lnMemTimeouts OBJECT-TYPE --<< STRING mem.timeouts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Memory timeouts."
::= { lnMem 10 }
lnDBBufferControlPoolSize OBJECT-TYPE --<< INT database.buffercontrolpool.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of the buffer control pool."
::= { lnDatabase 1 }
lnDBBufferControlPoolUsed OBJECT-TYPE --<< INT database.buffercontrolpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes used in buffer control pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 2 }
lnDBBufferPoolAllocated OBJECT-TYPE --<< INT database.bufferpool.allocated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes allocated from the buffer pool."
::= { lnDatabase 3 }
lnDBBufferPoolMaximum OBJECT-TYPE --<< INT database.bufferpool.maximum
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum size of the buffer pool."
::= { lnDatabase 4 }
lnDBBufferPoolUsed OBJECT-TYPE --<< INT database.bufferpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of used buffers from the buffer pool."
::= { lnDatabase 5 }
lnDBNSFPoolSize OBJECT-TYPE --<< INT database.nsfpool.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of NSF pool."
::= { lnDatabase 6 }
lnDBNSFPoolUsed OBJECT-TYPE --<< INT database.nsfpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Amount of space used in NSF pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 7 }
lnDBBufferPoolPercentReadsInBuffer OBJECT-TYPE --<< INT database.bufferpool.percentreadsinbuffer
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Percentage of buffer pool reads."
::= { lnDatabase 8 }
lnDBBufferPoolReads OBJECT-TYPE --<< INT database.bufferpool.reads
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database buffer pool reads."
::= { lnDatabase 9 }
lnDBBufferPoolWrites OBJECT-TYPE --<< INT database.bufferpool.writes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database buffer pool writes."
::= { lnDatabase 10 }
lnDBNIFPoolSize OBJECT-TYPE --<< INT database.nifpool.size
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Size of database NIF pool."
::= { lnDatabase 11 }
lnDBNIFPoolUsed OBJECT-TYPE --<< INT database.nifpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database NIF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 12 }
lnDBNIFPoolPeak OBJECT-TYPE --<< INT database.nifpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of database NIF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 13 }
lnDBNSFPoolPeak OBJECT-TYPE --<< INT database.nsfpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of database NSF pools.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 14 }
lnDBCacheCurrentEntries OBJECT-TYPE --<< INT database.dbcache.currententries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases currently in the cache. Administrators
should monitor this number to see whether it approaches the
NSF_DBCACHE_MAXENTRIES setting. If it does, this indicates
the cache is under pressure. If this situation
occurs frequently, the administrator should increase the setting for
NSF_DBCACHE_MAXENTRIES."
::= { lnDatabase 15 }
lnDBCacheHighWaterMark OBJECT-TYPE --<< INT database.dbcache.highwatermark
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of databases in the cache during this
running of the Domino server program. Note that this number
may be artificially high due to startup activity, so it may
be of limited use as a genuine indicator of cache performance."
::= { lnDatabase 16 }
lnDBCacheHits OBJECT-TYPE --<< INT database.dbcache.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times an lnDBCacheInitialDbOpen is satisfied by
finding a database in the cache. A high 'hits-to-opens' ratio
indicates the database cache is working effectively, since
most users are opening databases in the cache without having
to wait for the usual time required by an initial (non-cache)
open. If the ratio is low (in other words, more users are
having to wait for databases not in the cache to open), the
administrator can increase the NSF_DBCACHE_MAXENTRIES
settings."
::= { lnDatabase 17 }
lnDBCacheInitialDbOpens OBJECT-TYPE --<< INT database.dbcache.initialdbopens
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a user/server opened a database that was
not already being used by another user/server. By comparing
this number to lnDBCacheHits, administrators can gauge the
effectiveness of the cache."
::= { lnDatabase 18 }
lnDBCacheLookups OBJECT-TYPE --<< INT database.dbcache.lookups
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of lookups performed on the cache."
::= { lnDatabase 19 }
lnDBCacheMaxEntries OBJECT-TYPE --<< INT database.dbcache.maxentries
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of databases that the server can currently
hold in its cache at once."
::= { lnDatabase 20 }
lnDBCacheOvercrowdingRejections OBJECT-TYPE --<< INT database.dbcache.overcrowdingrejections
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a database is not placed into the
cache when it is closed because lnDBCacheCurrentEntries equals
or exceeds lnDBCacheMaxEntries*1.5. This number should stay
low. If it begins to rise, you should increase the
NSF_DbCache_Maxentries settings."
::= { lnDatabase 21 }
lnDBBufferControlPoolPeak OBJECT-TYPE --<< INT database.buffercontrolpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak size of buffer control pool.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDatabase 22 }
lnDBBufferPoolPeak OBJECT-TYPE --<< INT database.bufferpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of database buffer pools."
::= { lnDatabase 23 }
lnDBExtMgrPoolPeak OBJECT-TYPE --<< INT database.extmgrpool.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number of external manager pools."
::= { lnDatabase 24 }
lnDBExtMgrPoolUsed OBJECT-TYPE --<< INT database.extmgrpool.used
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of External Manager pools."
::= { lnDatabase 25 }
lnDBNSFFreeHandleStackHits OBJECT-TYPE --<< INT database.nsf.freehandlestack.freehandlestackhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of free handle stack hits."
::= { lnDatabase 26 }
lnDBNSFFreeHandleStackAllocations OBJECT-TYPE --<< INT database.nsf.freehandlestack.handleallocations
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of database free handle stack allocations."
::= { lnDatabase 27 }
lnDBNSFFreeHandleStackMissRate OBJECT-TYPE --<< INT database.nsf.freehandlestack.missrate
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Free handle stack miss rate."
::= { lnDatabase 28 }
lnDailyAccessDenials OBJECT-TYPE --<< INT agent.daily.accessdenials
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times the agent manager failed to execute
a given task, probably due to ACL restrictions."
::= { lnAgentMgr 1 }
lnDailyScheduledRuns OBJECT-TYPE --<< INT agent.daily.scheduledruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks that the agent manager has scheduled
to run during the course of the day."
::= { lnAgentMgr 2 }
lnDailyTriggeredRuns OBJECT-TYPE --<< INT agent.daily.triggeredruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks that the agent manager has had triggered
to run by an event during the course of the day."
::= { lnAgentMgr 3 }
lnDailyUnsuccessfulRuns OBJECT-TYPE --<< INT agent.daily.unsuccessfulruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has unsuccessfully
run during the course of the day."
::= { lnAgentMgr 4 }
lnDailyUsedRunTime OBJECT-TYPE --<< STRING agent.daily.usedruntime
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of seconds used to run an agent."
::= { lnAgentMgr 5 }
lnHourlyAccessDenials OBJECT-TYPE --<< INT agent.hourly.accessdenials
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks that the agent manager failed to
execute during the last hour, probably due to ACL restrictions."
::= { lnAgentMgr 6 }
lnHourlyScheduledRuns OBJECT-TYPE --<< INT agent.hourly.scheduledruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has scheduled to
run during the last hour."
::= { lnAgentMgr 7 }
lnHourlyTriggeredRuns OBJECT-TYPE --<< INT agent.hourly.triggeredruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has had triggered to
run by an event during the last hour."
::= { lnAgentMgr 8 }
lnHourlyUnsuccessfulRuns OBJECT-TYPE --<< INT agent.hourly.unsuccessfulruns
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of tasks the agent manager has unsuccessfully
run during the last hour."
::= { lnAgentMgr 9 }
lnHourlyUsedRunTime OBJECT-TYPE --<< STRING agent.hourly.usedruntime
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of seconds to run an agent."
::= { lnAgentMgr 10 }
lnMTATable OBJECT-TYPE
SYNTAX SEQUENCE OF LnMTAEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each running Notes server MTA."
::= { lnMTA 1 }
lnMTAEntry OBJECT-TYPE
SYNTAX LnMTAEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnMTATable."
INDEX { lnMTAIndex }
::= { lnMTATable 1 }
LnMTAEntry ::= SEQUENCE {
lnMTAIndex INTEGER,
lnMTAName DisplayString,
lnMTADeadMsgs INTEGER,
lnMTAWaitingRecp INTEGER,
lnMTAWaitingMsgs INTEGER,
lnMTATransferFailures INTEGER,
lnMTATotalKBTransferred INTEGER,
lnMTATransferredMsgs INTEGER,
lnMTATotalRouted INTEGER
}
lnMTAIndex OBJECT-TYPE --<< INDEX mta.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each MTA running on the Notes server."
::= { lnMTAEntry 1 }
lnMTAName OBJECT-TYPE --<< NAME mta.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A string representing the name of a MTA running on the Notes server."
::= { lnMTAEntry 2 }
lnMTADeadMsgs OBJECT-TYPE --<< INT mta.*.dead
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of dead mail messages. (Messages that are stuck
in the MTA queue.)"
::= { lnMTAEntry 3 }
lnMTAWaitingRecp OBJECT-TYPE --<< INT mta.*.waitingrecipients
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of recipients for pending mail. (The number of
recipients responsible for lnMTAWaitingMsgs.)"
::= { lnMTAEntry 4 }
lnMTAWaitingMsgs OBJECT-TYPE --<< INT mta.*.waiting
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The amount of mail awaiting routing. (The number of messages
that are in the process of being routed.)"
::= { lnMTAEntry 5 }
lnMTATransferFailures OBJECT-TYPE --<< INT mta.*.transferfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of messages the MTA could not transfer."
::= { lnMTAEntry 6 }
lnMTATotalKBTransferred OBJECT-TYPE --<< INT mta.*.totalkbtransferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of kilobyte transferred outbound
or into any of the .box's by this MTA."
::= { lnMTAEntry 7 }
lnMTATransferredMsgs OBJECT-TYPE --<< INT mta.*.transferred
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of messages transferred outbound or
into any of the .box's by this MTA."
::= { lnMTAEntry 8 }
lnMTATotalRouted OBJECT-TYPE --<< INT mta.*.totalrouted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total amount of mail routed (# of recipients routed to)
outbound or into any of the .box's."
::= { lnMTAEntry 9 }
lnWebAccessFtp OBJECT-TYPE --<< INT web.retriever.access.ftp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of FTP connections on this Web server."
::= { lnWeb 1 }
lnWebAccessGopher OBJECT-TYPE --<< INT web.retriever.access.gopher
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Gopher connections on this Web server."
::= { lnWeb 2 }
lnWebAccessHttp OBJECT-TYPE --<< INT web.retriever.access.http
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of HTTP connections on this Web server."
::= { lnWeb 3 }
lnWebKBytesReceived OBJECT-TYPE --<< KINT web.retriever.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes received by this Web server."
::= { lnWeb 4 }
lnWebKBytesSent OBJECT-TYPE --<< KINT web.retriever.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total kilobytes sent by this Web server."
::= { lnWeb 5 }
lnWebImageCacheHits OBJECT-TYPE --<< INT web.retriever.imagecache.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of successful hits on the image cache."
::= { lnWeb 6 }
lnWebImageCacheMisses OBJECT-TYPE --<< INT web.retriever.imagecache.misses
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of image cache misses."
::= { lnWeb 7 }
lnWebLogMessages OBJECT-TYPE --<< STRING web.retriever.logmessages
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
" 'Yes' if message logging is turned on."
::= { lnWeb 8 }
lnWebActiveProcesses OBJECT-TYPE --<< INT web.retriever.process.num.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of active Web Retriever processes."
::= { lnWeb 9 }
lnWebBusyProcesses OBJECT-TYPE --<< INT web.retriever.process.num.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Web Retriever processes currently busy working."
::= { lnWeb 10 }
lnWebIdleProcesses OBJECT-TYPE --<< INT web.retriever.process.num.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Web Retriever processes that are sitting idle."
::= { lnWeb 11 }
lnWebMaxProcesses OBJECT-TYPE --<< INT web.retriever.process.num.maximum
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of Web Retriever processes allowable on this server."
::= { lnWeb 12 }
lnWebProcessState OBJECT-TYPE --<< STRING web.retriever.process.state
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of image cache misses."
::= { lnWeb 13 }
lnWebTimeCurrent OBJECT-TYPE --<< STRING web.retriever.time.current
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The current time, as set on this Web Retriever."
::= { lnWeb 14 }
lnWebTimeDuration OBJECT-TYPE --<< STRING web.retriever.time.duration
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Shows the amount of time this Web Retriever has been running."
::= { lnWeb 15 }
lnWebTimeStart OBJECT-TYPE --<< STRING web.retriever.time.start
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The time the Web Retriever processes started."
::= { lnWeb 16 }
lnWebUrlFail OBJECT-TYPE --<< INT web.retriever.urls.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number URL requests that have failed on this Web Retriever."
::= { lnWeb 17 }
lnWebUrlRequested OBJECT-TYPE --<< INT web.retriever.urls.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of URL requests on this Web Retriever."
::= { lnWeb 18 }
lnWebUrlSucceeded OBJECT-TYPE --<< INT web.retriever.urls.succeeded
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL requests successfully completed on this server."
::= { lnWeb 19 }
lnWebRetrieverVersion OBJECT-TYPE --<< STRING web.retriever.version
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The version of the Web Retriever software that is running."
::= { lnWeb 20 }
lnWebVpoolMaxBuf OBJECT-TYPE --<< INT web.retriever.vpool.max.buf
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of buffer VPOOLs which have reached maximum size."
::= { lnWeb 21 }
lnWebVpoolMaxElement OBJECT-TYPE --<< INT web.retriever.vpool.max.element
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of element VPOOLs which have reached maximum size."
::= { lnWeb 22 }
lnWebVpoolMaxMarker OBJECT-TYPE --<< INT web.retriever.vpool.max.marker
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of marker VPOOLs which have reached maximum size."
::= { lnWeb 23 }
lnWebVpoolMaxText OBJECT-TYPE --<< INT web.retriever.vpool.max.text
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of text VPOOLs which have reached maximum size."
::= { lnWeb 24 }
lnWebVpoolMaxUrl OBJECT-TYPE --<< INT web.retriever.vpool.max.url
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL VPOOLs which have reached maximum size."
::= { lnWeb 25 }
lnWebProcTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnWebProcEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This table will show statistics for all Web Retriever
processes on the server."
::= { lnWeb 26 }
lnWebRetrieverLogLevel OBJECT-TYPE --<< STRING web.retriever.loglevel
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Web retriever logging Level."
::= { lnWeb 27 }
lnWebRetrieverProcessAccessFTP OBJECT-TYPE --<< INT web.retriever.process.access.ftp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retriever process FTP accesses."
::= { lnWeb 28 }
lnWebRetrieverProcessAccessGopher OBJECT-TYPE --<< INT web.retriever.process.access.gopher
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retriever process Gopher accesses."
::= { lnWeb 29 }
lnWebRetrieverProcessAccessHTTP OBJECT-TYPE --<< INT web.retriever.process.access.http
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of retriever process HTTP accesses."
::= { lnWeb 30 }
lnWebRetrieverProcessBytesReceived OBJECT-TYPE --<< INT web.retriever.process.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes received by retriever process."
::= { lnWeb 31 }
lnWebRetrieverProcessBytesSent OBJECT-TYPE --<< INT web.retriever.process.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes sent by retriever process."
::= { lnWeb 32 }
lnWebRetrieverProcessProcessID OBJECT-TYPE --<< INT web.retriever.process.processid
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Process id number."
::= { lnWeb 33 }
lnWebRetrieverProcessURLsFailed OBJECT-TYPE --<< INT web.retriever.process.urls.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed retriever process URLs."
::= { lnWeb 34 }
lnWebRetrieverProcessURLsRequested OBJECT-TYPE --<< INT web.retriever.process.urls.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requested retriever process URLs."
::= { lnWeb 35 }
lnWebRetrieverProcessURLsSucceeded OBJECT-TYPE --<< INT web.retriever.process.urls.succeeded
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of successful retriever process URLs."
::= { lnWeb 36 }
lnWebProcEntry OBJECT-TYPE
SYNTAX LnWebProcEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This defines the MIB variables specific to each Web Retriever process."
INDEX { lnWebProcIndex }
::= { lnWebProcTable 1 }
LnWebProcEntry ::= SEQUENCE {
lnWebProcIndex INTEGER,
lnWebProcNumber DisplayString,
lnWebProcAccFtp INTEGER,
lnWebProcAccGopher INTEGER,
lnWebProcAccHttp INTEGER,
lnWebProcKBytesRec INTEGER,
lnWebProcKBytesSent INTEGER,
lnWebProcCacheHits INTEGER,
lnWebProcCacheMisses INTEGER,
lnWebProcPid INTEGER,
lnWebProcUrlFail INTEGER,
lnWebProcUrlReq INTEGER,
lnWebProcUrlSucc INTEGER,
lnWebProcVpoolCurBuf INTEGER,
lnWebProcVpoolCurElement INTEGER,
lnWebProcVpoolCurMarker INTEGER,
lnWebProcVpoolCurText INTEGER,
lnWebProcVpoolCurUrl INTEGER,
lnWebProcVpoolMaxBuf INTEGER,
lnWebProcVpoolMaxElement INTEGER,
lnWebProcVpoolMaxMarker INTEGER,
lnWebProcVpoolMaxText INTEGER,
lnWebProcVpoolMaxUrl INTEGER
}
lnWebProcIndex OBJECT-TYPE --<< INDEX web.retriever.process.*
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique index entry for each Web Retriever process."
::= { lnWebProcEntry 1 }
lnWebProcNumber OBJECT-TYPE --<< NAME web.retriever.process.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The number associated with the Web Retriever process in
the Notes stats structure."
::= { lnWebProcEntry 2 }
lnWebProcAccFtp OBJECT-TYPE --<< INT web.retriever.process.*.access.ftp
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of FTP connections this Web Retriever process is handling."
::= { lnWebProcEntry 3 }
lnWebProcAccGopher OBJECT-TYPE --<< INT web.retriever.process.*.access.gopher
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Gopher connections this Web Retriever process
is handling."
::= { lnWebProcEntry 4 }
lnWebProcAccHttp OBJECT-TYPE --<< INT web.retriever.process.*.access.http
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of HTTP connections this Web Retriever process is handling."
::= { lnWebProcEntry 5 }
lnWebProcKBytesRec OBJECT-TYPE --<< KINT web.retriever.process.*.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of kilobytes this Web Retriever process has received."
::= { lnWebProcEntry 6 }
lnWebProcKBytesSent OBJECT-TYPE --<< KINT web.retriever.process.*.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of kilobytes this Web Retriever process has sent."
::= { lnWebProcEntry 7 }
lnWebProcCacheHits OBJECT-TYPE --<< INT web.retriever.process.*.imagecache.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of successful image cache hits for
this Web Retriever."
::= { lnWebProcEntry 8 }
lnWebProcCacheMisses OBJECT-TYPE --<< INT web.retriever.process.*.imagecache.misses
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of image cache misses for this Web Retriever."
::= { lnWebProcEntry 9 }
lnWebProcPid OBJECT-TYPE --<< INT web.retriever.process.*.pid
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The process ID associated with this Web Retriever process."
::= { lnWebProcEntry 10 }
lnWebProcUrlFail OBJECT-TYPE --<< INT web.retriever.process.*.urls.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL opens that failed for this Web Retriever process."
::= { lnWebProcEntry 11 }
lnWebProcUrlReq OBJECT-TYPE --<< INT web.retriever.process.*.urls.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL open requests this Web Retriever process handled."
::= { lnWebProcEntry 12 }
lnWebProcUrlSucc OBJECT-TYPE --<< INT web.retriever.process.*.urls.succeeded
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of successful URL opens this Web Retriever process handled."
::= { lnWebProcEntry 13 }
lnWebProcVpoolCurBuf OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.buf
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of buffer VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 14 }
lnWebProcVpoolCurElement OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.element
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of element VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 15 }
lnWebProcVpoolCurMarker OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.marker
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of marker VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 16 }
lnWebProcVpoolCurText OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.text
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of text VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 17 }
lnWebProcVpoolCurUrl OBJECT-TYPE --<< INT web.retriever.process.*.vpool.cur.url
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL VPOOLs currently allocated for this
Web Retriever process."
::= { lnWebProcEntry 18 }
lnWebProcVpoolMaxBuf OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.buf
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of buffer VPOOLs allocated for this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 19 }
lnWebProcVpoolMaxElement OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.element
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of element VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 20 }
lnWebProcVpoolMaxMarker OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.marker
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 21 }
lnWebProcVpoolMaxText OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.text
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of text VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 22 }
lnWebProcVpoolMaxUrl OBJECT-TYPE --<< INT web.retriever.process.*.vpool.max.url
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of URL VPOOLs allocated to this Web Retriever process
that have reached their maximum size."
::= { lnWebProcEntry 23 }
lnObjectFileName OBJECT-TYPE --<< STRING object.filename
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the primary single-copy object store (SCOS) database
currently in use."
::= { lnObject 1 }
lnObjectTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnObjectEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This table describes statistics for the single-copy object store
of each SCOS database that is currently being accessed."
::= { lnObject 2 }
lnObjectEntry OBJECT-TYPE
SYNTAX LnObjectEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"All items in LnObjectTable."
INDEX { lnObjectIndex }
::= { lnObjectTable 1 }
LnObjectEntry ::= SEQUENCE {
lnObjectIndex INTEGER,
lnObjectName DisplayString,
lnObjectSharedBy01 INTEGER,
lnObjectSharedBy02 INTEGER,
lnObjectSharedBy03 INTEGER,
lnObjectSharedBy04 INTEGER,
lnObjectSharedBy05 INTEGER,
lnObjectSharedBy06 INTEGER,
lnObjectSharedBy07 INTEGER,
lnObjectSharedBy08 INTEGER,
lnObjectSharedBy09 INTEGER,
lnObjectSharedBy10 INTEGER,
lnObjectSharedBy11 INTEGER,
lnObjectSharedBy12 INTEGER,
lnObjectSharedBy13 INTEGER,
lnObjectSharedBy14 INTEGER,
lnObjectSharedBy15 INTEGER,
lnObjectSharedBy16 INTEGER,
lnObjectSharedBy17 INTEGER,
lnObjectSharedBy18 INTEGER,
lnObjectSharedBy19 INTEGER,
lnObjectSharedBy20 INTEGER,
lnObjectSharedByGreater INTEGER,
lnObjectSharedByTotal INTEGER
}
lnObjectIndex OBJECT-TYPE --<< INDEX object.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"An internal index for each SCOS database in use."
::= { lnObjectEntry 1 }
lnObjectName OBJECT-TYPE --<< NAME object.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the single copy object store database."
::= { lnObjectEntry 2 }
lnObjectSharedBy01 OBJECT-TYPE --<< INT object.*.sharedby.01
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 1 pointer."
::= { lnObjectEntry 3 }
lnObjectSharedBy02 OBJECT-TYPE --<< INT object.*.sharedby.02
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 2 pointers."
::= { lnObjectEntry 4 }
lnObjectSharedBy03 OBJECT-TYPE --<< INT object.*.sharedby.03
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 3 pointers."
::= { lnObjectEntry 5 }
lnObjectSharedBy04 OBJECT-TYPE --<< INT object.*.sharedby.04
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 4 pointers."
::= { lnObjectEntry 6 }
lnObjectSharedBy05 OBJECT-TYPE --<< INT object.*.sharedby.05
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 5 pointers."
::= { lnObjectEntry 7 }
lnObjectSharedBy06 OBJECT-TYPE --<< INT object.*.sharedby.06
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 6 pointers."
::= { lnObjectEntry 8 }
lnObjectSharedBy07 OBJECT-TYPE --<< INT object.*.sharedby.07
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 7 pointers."
::= { lnObjectEntry 9 }
lnObjectSharedBy08 OBJECT-TYPE --<< INT object.*.sharedby.08
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 8 pointers."
::= { lnObjectEntry 10 }
lnObjectSharedBy09 OBJECT-TYPE --<< INT object.*.sharedby.09
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 9 pointers."
::= { lnObjectEntry 11 }
lnObjectSharedBy10 OBJECT-TYPE --<< INT object.*.sharedby.10
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 10 pointers."
::= { lnObjectEntry 12 }
lnObjectSharedBy11 OBJECT-TYPE --<< INT object.*.sharedby.11
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 11 pointers."
::= { lnObjectEntry 13 }
lnObjectSharedBy12 OBJECT-TYPE --<< INT object.*.sharedby.12
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 12 pointers."
::= { lnObjectEntry 14 }
lnObjectSharedBy13 OBJECT-TYPE --<< INT object.*.sharedby.13
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 13 pointers."
::= { lnObjectEntry 15 }
lnObjectSharedBy14 OBJECT-TYPE --<< INT object.*.sharedby.14
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 14 pointers."
::= { lnObjectEntry 16 }
lnObjectSharedBy15 OBJECT-TYPE --<< INT object.*.sharedby.15
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 15 pointers."
::= { lnObjectEntry 17 }
lnObjectSharedBy16 OBJECT-TYPE --<< INT object.*.sharedby.16
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 16 pointers."
::= { lnObjectEntry 18 }
lnObjectSharedBy17 OBJECT-TYPE --<< INT object.*.sharedby.17
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 17 pointers."
::= { lnObjectEntry 19 }
lnObjectSharedBy18 OBJECT-TYPE --<< INT object.*.sharedby.18
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 18 pointers."
::= { lnObjectEntry 20 }
lnObjectSharedBy19 OBJECT-TYPE --<< INT object.*.sharedby.19
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 19 pointers."
::= { lnObjectEntry 21 }
lnObjectSharedBy20 OBJECT-TYPE --<< INT object.*.sharedby.20
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with 20 pointers."
::= { lnObjectEntry 22 }
lnObjectSharedByGreater OBJECT-TYPE --<< INT object.*.sharedby.greater
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Messages with more than 20 pointers."
::= { lnObjectEntry 23 }
lnObjectSharedByTotal OBJECT-TYPE --<< INT object.*.sharedby.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of shared messages."
::= { lnObjectEntry 24 }
lnDominoBuildName OBJECT-TYPE --<< STRING domino.buildname
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name given to the build."
::= { lnDominoInfo 1 }
lnDominoBuildNumber OBJECT-TYPE --<< STRING domino.buildnumber
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The build number given to the build."
::= { lnDominoInfo 2 }
lnDominoBuildPlatform OBJECT-TYPE --<< STRING domino.buildplatform
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The platform this build was created on."
::= { lnDominoInfo 3 }
lnDominoBuildVersion OBJECT-TYPE --<< STRING domino.buildversion
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The version string associated with this build."
::= { lnDominoInfo 4 }
lnDominoThreadsActivePeak OBJECT-TYPE --<< INT domino.threads.active.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The peak number of active threads since the Domino server was started."
::= { lnDominoInfo 5 }
lnDominoThreadsTotal OBJECT-TYPE --<< INT domino.threads.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of available threads to service Domino requests."
::= { lnDominoInfo 6 }
lnDominoThreadsPeakTotal OBJECT-TYPE --<< INT domino.threads.peak.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total peak number of active threads since the Domino server
was started."
::= { lnDominoInfo 7 }
lnDominoThreadsPeakTime OBJECT-TYPE --<< TIME domino.threads.peak.time
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time when the peak number of threads to service Domino requests
occured, represented as the number of seconds since midnight
1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 8 }
lnDominoStartTime OBJECT-TYPE --<< TIME domino.starttime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time and date the Domino server was started, represented as the
number of seconds since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 9 }
lnDominoReqPerMinTotal OBJECT-TYPE --<< INT domino.requests.per1minute.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requests in the last minute.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 10 }
lnDominoReqPerMinPeak OBJECT-TYPE --<< INT domino.requests.per1minute.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during
a one minute interval."
::= { lnDominoInfo 11 }
lnDominoReqPerMinPeakTime OBJECT-TYPE --<< TIME domino.requests.per1minute.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requests occured during
a one minute interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 12 }
lnDominoReqPer5MinsTotal OBJECT-TYPE --<< INT domino.requests.per5minute.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requests in the last five minutes.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 13 }
lnDominoReqPer5MinsPeak OBJECT-TYPE --<< INT domino.requests.per5minute.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during a
five minute interval."
::= { lnDominoInfo 14 }
lnDominoReqPer5MinsPeakTime OBJECT-TYPE --<< TIME domino.requests.per5minute.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requets occured during
a five minute interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 15 }
lnDominoReqPerHourTotal OBJECT-TYPE --<< INT domino.requests.per1hour.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requetss in the last hour.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 16 }
lnDominoReqPerHourPeak OBJECT-TYPE --<< INT domino.requests.per1hour.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during a 1 hour
interval."
::= { lnDominoInfo 17 }
lnDominoReqPerHourPeakTime OBJECT-TYPE --<< TIME domino.requests.per1hour.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requests occured during a
one hour interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 18 }
lnDominoReqPerDayTotal OBJECT-TYPE --<< INT domino.requests.per1day.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requestes in the last day.
A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 19 }
lnDominoReqPerDayPeak OBJECT-TYPE --<< INT domino.requests.per1day.peak
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The highest number of Domino requests to occur during a one day interval."
::= { lnDominoInfo 20 }
lnDominoReqPerDayPeakTime OBJECT-TYPE --<< TIME domino.requests.per1day.peaktime
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that the peak number of Domino requests occured during
a one day interval, represented as the number of seconds since
midnight 1/1/70 GMT (UNIX epoch)."
::= { lnDominoInfo 21 }
lnDominoRequestsTotal OBJECT-TYPE --<< INT domino.requests.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of Domino requests since the Domino server
was started. A value of zero may indicate the statistic's value is
too large to be passed via SNMP."
::= { lnDominoInfo 22 }
lnDominoCacheCommandDisplaceRate OBJECT-TYPE --<< INT domino.cache.command.displacerate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Command cache displace rate."
::= { lnDominoInfo 23 }
lnDominoCacheCommandHitRate OBJECT-TYPE --<< INT domino.cache.command.hitrate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domino command cache hit rate."
::= { lnDominoInfo 24 }
lnDominoCacheDatabaseDisplaceRate OBJECT-TYPE --<< INT domino.cache.database.displacerate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domino database cache displace rate."
::= { lnDominoInfo 25 }
lnDominoCacheDatabaseHitRate OBJECT-TYPE --<< INT domino.cache.database.hitrate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domino database cache hit rate."
::= { lnDominoInfo 26 }
lnDominoCmdInfoEditDocument OBJECT-TYPE --<< INT domino.command.editdocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of EditDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 1 }
lnDominoCmdInfoOpenServer OBJECT-TYPE --<< INT domino.command.openserver
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenServer commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 2 }
lnDominoCmdInfoOpenDatabase OBJECT-TYPE --<< INT domino.command.opendatabase
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenDatabase commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 3 }
lnDominoCmdInfoOpenView OBJECT-TYPE --<< INT domino.command.openview
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenView commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 4 }
lnDominoCmdInfoOpenDocument OBJECT-TYPE --<< INT domino.command.opendocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 5 }
lnDominoCmdInfoOpenElement OBJECT-TYPE --<< INT domino.command.openelement
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenElement commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 6 }
lnDominoCmdInfoOpenIcon OBJECT-TYPE --<< INT domino.command.openicon
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenIcon commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 7 }
lnDominoCmdInfoOpenForm OBJECT-TYPE --<< INT domino.command.openform
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenForm commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 8 }
lnDominoCmdInfoOpenAgent OBJECT-TYPE --<< INT domino.command.openagent
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenAgent commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 9 }
lnDominoCmdInfoOpenNavigator OBJECT-TYPE --<< INT domino.command.opennavigator
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenNavigator commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 10 }
lnDominoCmdInfoOpenAbout OBJECT-TYPE --<< INT domino.command.openabout
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenAbout commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 11 }
lnDominoCmdInfoOpenHelp OBJECT-TYPE --<< INT domino.command.openhelp
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of OpenHelp commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 12 }
lnDominoCmdInfoCreateDocument OBJECT-TYPE --<< INT domino.command.createdocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of CreateDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 13 }
lnDominoCmdInfoSaveDocument OBJECT-TYPE --<< INT domino.command.savedocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of SaveDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 14 }
lnDominoCmdInfoDeleteDocument OBJECT-TYPE --<< INT domino.command.deletedocument
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of DeleteDocument commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 15 }
lnDominoCmdInfoSearchSite OBJECT-TYPE --<< INT domino.command.searchsite
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of SearchSite commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 16 }
lnDominoCmdInfoSearchView OBJECT-TYPE --<< INT domino.command.searchview
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of SearchView commands requested since the Domino
server was started."
::= { lnDominoCmdInfo 17 }
lnDominoCmdInfoUnknown OBJECT-TYPE --<< INT domino.command.unknown
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of unrecognized Domino commands."
::= { lnDominoCmdInfo 18 }
lnDominoCmdInfoLogin OBJECT-TYPE --<< INT domino.command.login
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Login commands requested since the Domino server
was started."
::= { lnDominoCmdInfo 19 }
lnDominoCmdInfoNavigate OBJECT-TYPE --<< INT domino.command.navigate
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Navigate commands requested since the Domino server
was started."
::= { lnDominoCmdInfo 20 }
lnDominoCmdInfoReadForm OBJECT-TYPE --<< INT domino.command.readform
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of Read Form commands requested since the Domino server
was started."
::= { lnDominoCmdInfo 21 }
lnDominoCmdInfoTotal OBJECT-TYPE --<< INT domino.command.total
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of commands performed since the Domino server
was started."
::= { lnDominoCmdInfo 22 }
lnDominoCfgPortNumber OBJECT-TYPE --<< INT domino.config.portnumber
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The TCP/IP port number from the server record."
::= { lnDominoConfig 1 }
lnDominoCfgPortStatus OBJECT-TYPE --<< INT domino.config.portstatus
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The TCP/IP port status (enabled or disabled)."
::= { lnDominoConfig 2 }
lnDominoCfgHostName OBJECT-TYPE --<< STRING domino.config.hostname
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The HostName of the Domino server."
::= { lnDominoConfig 3 }
lnDominoCfgDNSLookup OBJECT-TYPE --<< INT domino.config.dnslookup
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The status of DNS lookup (enabled or disabled)."
::= { lnDominoConfig 4 }
lnDominoCfgHomeURL OBJECT-TYPE --<< STRING domino.config.homeurl
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The URL that requests are directed to if only the server name
is specified."
::= { lnDominoConfig 5 }
lnDominoCfgWelcomePage OBJECT-TYPE --<< STRING domino.config.welcomepage
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The page name to direct to if no explicit page name is
specified in the URL."
::= { lnDominoConfig 6 }
lnDominoCfgActiveThreadsMax OBJECT-TYPE --<< INT domino.config.activethreads.max
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum number of active threads servicing HTTP requests."
::= { lnDominoConfig 7 }
lnDominoCfgActiveThreadsMin OBJECT-TYPE --<< INT domino.config.activethreads.min
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The minimum number of active threads servicing HTTP requests."
::= { lnDominoConfig 8 }
lnDominoCfgSSLPortNumber OBJECT-TYPE --<< INT domino.config.ssl.portnumber
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The TCP/IP port number for HTTP requests using SLL."
::= { lnDominoConfig 9 }
lnDominoCfgSSLStatus OBJECT-TYPE --<< INT domino.config.ssl.status
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The SSL status (enabled or disabled)."
::= { lnDominoConfig 10 }
lnDominoCfgSSLKeyFile OBJECT-TYPE --<< STRING domino.config.ssl.keyfile
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The file name for SSL keys."
::= { lnDominoConfig 11 }
lnDominoCfgCacheDirectory OBJECT-TYPE --<< STRING domino.config.cache.directory
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The directory for the Domino cache."
::= { lnDominoConfig 12 }
lnDominoCfgCacheSizeMax OBJECT-TYPE --<< INT domino.config.cache.size.max
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The maximum size of the Domino cache in MB."
::= { lnDominoConfig 13 }
lnDominoCfgCacheDelete OBJECT-TYPE --<< INT domino.config.cache.delete
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Delete Domino cache on shutdown (enabled or disabled)."
::= { lnDominoConfig 14 }
lnDominoCfgGarbageCollectionStatus OBJECT-TYPE --<< INT domino.config.garbagecollection.status
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Status of garbage collection (enabled or disabled)."
::= { lnDominoConfig 15 }
lnDominoCfgGarbageCollectionInterval OBJECT-TYPE --<< INT domino.config.garbagecollection.interval
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval between garbage collections in minutes."
::= { lnDominoConfig 16 }
lnDominoCfgImageFormat OBJECT-TYPE --<< STRING domino.config.image.format
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Graphics conversion image format."
::= { lnDominoConfig 17 }
lnDominoCfgImageInterlaced OBJECT-TYPE --<< INT domino.config.image.interlaced
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Graphics interlacing (enabled or disabled)."
::= { lnDominoConfig 18 }
lnDominoCfgViewLines OBJECT-TYPE --<< INT domino.config.view.lines
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of lines per view segment."
::= { lnDominoConfig 19 }
lnDominoCfgDirectoryHTML OBJECT-TYPE --<< STRING domino.config.directory.html
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The location of the HTML directory setting."
::= { lnDominoConfig 20 }
lnDominoCfgDirectoryURLPathCGI OBJECT-TYPE --<< STRING domino.config.urlpath.cgi
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The CGI URL path."
::= { lnDominoConfig 21 }
lnDominoCfgDirectoryCGI OBJECT-TYPE --<< STRING domino.config.directory.cgi
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The location of the CGI directory setting."
::= { lnDominoConfig 22 }
lnDominoCfgDirectoryURLPathIcons OBJECT-TYPE --<< STRING domino.config.urlpath.icons
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The Domino icons URL path."
::= { lnDominoConfig 23 }
lnDominoCfgDirectoryIcons OBJECT-TYPE --<< STRING domino.config.directory.icons
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The location of the Domino icons directory setting."
::= { lnDominoConfig 24 }
lnDominoCfgLogAccess OBJECT-TYPE --<< STRING domino.config.log.access
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The filename for Domino access logs."
::= { lnDominoConfig 25 }
lnDominoCfgLogError OBJECT-TYPE --<< STRING domino.config.log.error
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The filename for Domino error logs."
::= { lnDominoConfig 26 }
lnDominoCfgLogTimeStamp OBJECT-TYPE --<< STRING domino.config.log.timestamp
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The Domino timestamp format."
::= { lnDominoConfig 27 }
lnDominoCfgLogFilter OBJECT-TYPE --<< STRING domino.config.log.filter
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The Domino log filter setting."
::= { lnDominoConfig 28 }
lnDominoCfgTimeoutIdleThread OBJECT-TYPE --<< INT domino.config.timeout.idlethread
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before idle threads timeout."
::= { lnDominoConfig 29 }
lnDominoCfgTimeoutInput OBJECT-TYPE --<< INT domino.config.timeout.input
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before timeout expires while waiting
for input."
::= { lnDominoConfig 30 }
lnDominoCfgTimeoutOutput OBJECT-TYPE --<< INT domino.config.timeout.output
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before timeout expires while waiting
for output."
::= { lnDominoConfig 31 }
lnDominoCfgTimeoutCGI OBJECT-TYPE --<< INT domino.config.timeout.cgi
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The interval (in minutes) before CGI timeout expires while waiting
for input."
::= { lnDominoConfig 32 }
lnCalTotalAllApptsResources OBJECT-TYPE --<< INT calendar.total.all.appts.reservations
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of scheduled appointment and resource reservations."
::= { lnCalendar 1 }
lnCalTotalAllUsersResources OBJECT-TYPE --<< INT calendar.total.all.users.resources
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of resources that have been reserved, plus
the number of users with scheduled appointments."
::= { lnCalendar 2 }
lnCalTotalAppointments OBJECT-TYPE --<< INT calendar.total.appts
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of scheduled appointments."
::= { lnCalendar 3 }
lnCalTotalReservations OBJECT-TYPE --<< INT calendar.total.reservations
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of reservations for resources."
::= { lnCalendar 4 }
lnCalTotalResources OBJECT-TYPE --<< INT calendar.total.resources
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of resources that have been reserved."
::= { lnCalendar 5 }
lnCalTotalUsers OBJECT-TYPE --<< INT calendar.total.users
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of users that have scheduled appointments."
::= { lnCalendar 6 }
lnCollectorTimeCollected OBJECT-TYPE --<< TIME collector.time.collected
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time and date at which the statistics collector task last
collected statistics; represented as the number of seconds
since midnight 1/1/70 GMT (UNIX epoch)."
::= { lnCollector 1 }
lnCollectorTimeElapsed OBJECT-TYPE --<< STRING collector.time.elapsed
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The time that has elapsed since the statistics collector
task was started."
::= { lnCollector 2 }
lnClusterName OBJECT-TYPE --<< STRING server.cluster.name
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the cluster this server is a member of."
::= { lnCluster 1 }
lnClusterAvailIndex OBJECT-TYPE --<< INT server.cluster.availabilityindex
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current percentage or an index of the current server's
availability. A value of 0 indicates that the server has
virtually no available resources. A value of 100 indicates
that the server is completely available."
::= { lnCluster 2 }
lnClusterAvailThreshold OBJECT-TYPE --<< INT server.cluster.availabilitythreshold
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current setting of this server's availability threshold.
The value is compared against lnClusterAvailIndex.
BUSY - The availability index has dropped below the threshold."
::= { lnCluster 3 }
lnClusterPortName OBJECT-TYPE --<< STRING server.cluster.portname
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Default PortName being used for intra cluster network traffic.
There is no default port. Any available and active port may
be used for intra cluster traffic."
::= { lnCluster 4 }
lnClusterProbeCount OBJECT-TYPE --<< INT server.cluster.probecount
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The total number of times this cluster member has completed a
probe request for another cluster member."
::= { lnCluster 5 }
lnClusterProbeTimeout OBJECT-TYPE --<< INT server.cluster.probetimeout(mins)
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"In Minutes. The interval between intra cluster probes or
cluster member heartbeats."
::= { lnCluster 6 }
lnClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnClusterEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing one entry for each configured Notes server
cluster member known by this server."
::= { lnCluster 7 }
lnClusterProbeError OBJECT-TYPE --<< INT server.cluster.probeerror
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a server received an error while
probing another server."
::= { lnCluster 11 }
lnClusterEntry OBJECT-TYPE
SYNTAX LnClusterEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnClusterTable."
INDEX { lnClusterTableIndex }
::= { lnClusterTable 1 }
LnClusterEntry ::= SEQUENCE {
lnClusterTableIndex INTEGER,
lnClusterMemberName DisplayString,
lnClusterMemberIndex DisplayString
}
lnClusterTableIndex OBJECT-TYPE --<< INDEX server.cluster.member.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnClusterTable."
::= { lnClusterEntry 1 }
lnClusterMemberName OBJECT-TYPE --<< NAME server.cluster.member.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Name of Notes Cluster Member."
::= { lnClusterEntry 2 }
lnClusterMemberIndex OBJECT-TYPE --<< STRING server.cluster.member.*.index
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The last known load information for a cluster member."
::= { lnClusterEntry 3 }
lnClusterFailoverByPathSucc OBJECT-TYPE --<< INT server.cluster.openredirects.failoverbypath.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully able
to redirect a client to another cluster member after the
client was unable to open a database by pathname on
a cluster member."
::= { lnOpenRedirects 1 }
lnClusterFailoverByPathUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.failoverbypath.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client was unable to open a database by pathname for
a cluster member."
::= { lnOpenRedirects 2 }
lnClusterFailoverSucc OBJECT-TYPE --<< INT server.cluster.openredirects.failover.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully
able to redirect a client to another cluster member
after the client was unable to open a database by
replica ID on a cluster member."
::= { lnOpenRedirects 3 }
lnClusterFailoverUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.failover.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client was unable to open a database by replica ID on
a cluster member."
::= { lnOpenRedirects 4 }
lnClusterLoadBalByPathSucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalancebypath.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully able to
redirect a client to another cluster member after the client
attempted to open a database by pathname on a cluster
member that was BUSY."
::= { lnOpenRedirects 5 }
lnClusterLoadBalByPathUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalancebypath.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client attempted to open a database by pathname on a
cluster member that was BUSY."
::= { lnOpenRedirects 6 }
lnClusterLoadBalSucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalance.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was successfully able to
redirect a client to another cluster member after the client
attempted to open a database by replica ID on a cluster
member that was BUSY."
::= { lnOpenRedirects 7 }
lnClusterLoadBalUnsucc OBJECT-TYPE --<< INT server.cluster.openredirects.loadbalance.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times this server was unsuccessful at
redirecting a client to another cluster member after the
client attempted to open a database by replica ID on
a cluster member that was BUSY."
::= { lnOpenRedirects 8 }
lnClusterOpenReqClustBusy OBJECT-TYPE --<< INT server.cluster.openrequest.clusterbusy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times that a client attempted to open a
database on this cluster member when it and the rest
of the cluster were BUSY."
::= { lnOpenRequest 1 }
lnClusterOpenReqDBOutofServ OBJECT-TYPE --<< INT server.cluster.openrequest.databaseoutofservice
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a client attempted to open a database
that has been marked as out of service on this cluster
member."
::= { lnOpenRequest 2 }
lnClusterOpenReqLoadBalanced OBJECT-TYPE --<< INT server.cluster.openrequest.loadbalanced
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The number of times a client attempted to open a database
on this cluster member when the cluster member was BUSY."
::= { lnOpenRequest 3 }
lnClusterTransIntAvgTime OBJECT-TYPE --<< INT server.cluster.trans.intervalavgtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average transaction time (in milliseconds) for this
member of the cluster. Based on transaction data
captured over a number of recent intervals of time."
::= { lnClusterTrans 1 }
lnClusterTransIntInSec OBJECT-TYPE --<< INT server.cluster.trans.intervalinseconds
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current setting for the length of the intervals.
Used to capture transaction data for load balance
computations."
::= { lnClusterTrans 2 }
lnClusterTransIntUsedInAvg OBJECT-TYPE --<< INT server.cluster.trans.intervalsusedinavg
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current setting of the number for intervals being
used to capture transaction data on load balance
computations."
::= { lnClusterTrans 3 }
lnClusterTransLastIntAvgTime OBJECT-TYPE --<< INT server.cluster.trans.lastintervalavgtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average transaction time for the last interval of
transaction data captured on this cluster member."
::= { lnClusterTrans 4 }
lnClusterTransNormValue OBJECT-TYPE --<< INT server.cluster.trans.normalizevalue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The current setting for the acceptable average
transaction time (in milliseconds) on this cluster
member."
::= { lnClusterTrans 5 }
lnClusterTransIntervalInMinutes OBJECT-TYPE --<< INT server.cluster.trans.intervalinminutes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Interval between cluster transactions."
::= { lnClusterTrans 6 }
lnClusterTransRunningAvgTime OBJECT-TYPE --<< TIME server.cluster.trans.runningavgtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average total running time of cluster transactions."
::= { lnClusterTrans 7 }
lnClusterTransRunningCount OBJECT-TYPE --<< INT server.cluster.trans.runningcount
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of cluster transactions."
::= { lnClusterTrans 8 }
lnClusterTransRunningTime OBJECT-TYPE --<< TIME server.cluster.trans.runningtime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total running time of cluster transactions."
::= { lnClusterTrans 9 }
lnFTDomainIndexBytesPerHour OBJECT-TYPE --<< INT ft.domain.index.bytes.perhour
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Domain full text indexing rate per hour of execution."
::= { lnFT 1 }
lnFTDomainIndexCount OBJECT-TYPE --<< INT ft.domain.index.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total domain full text indexing operations (1 per database or
file system)."
::= { lnFT 2 }
lnFTDomainIndexDocumentsAdded OBJECT-TYPE --<< INT ft.domain.index.documents.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of documents added to all domain full text indexes."
::= { lnFT 3 }
lnFTDomainIndexDocumentsDeleted OBJECT-TYPE --<< INT ft.domain.index.documents.deleted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents deleted from all domain full text indexes."
::= { lnFT 4 }
lnFTDomainIndexTotalBytes OBJECT-TYPE --<< INT ft.domain.index.total.bytes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total bytes added to all domain full text indexes."
::= { lnFT 5 }
lnFTDomainIndexTotalTimeMS OBJECT-TYPE --<< INT ft.domain.index.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time performing all domain full text indexing operations
in milliseconds."
::= { lnFT 6 }
lnFTDomainSearchAverageTimeMS OBJECT-TYPE --<< INT ft.domain.search.average.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average domain full text search time in milliseconds."
::= { lnFT 7 }
lnFTDomainSearchCount OBJECT-TYPE --<< INT ft.domain.search.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of all domain full text search operations."
::= { lnFT 8 }
lnFTDomainSearchMaxActualHits OBJECT-TYPE --<< INT ft.domain.search.max.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum documents found in a domain full text search."
::= { lnFT 9 }
lnFTDomainSearchTotalActualHits OBJECT-TYPE --<< INT ft.domain.search.total.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents found in all domain full text searches."
::= { lnFT 10 }
lnFTDomainSearchTotalResults OBJECT-TYPE --<< INT ft.domain.search.total.results
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents returned in all domain full text searches."
::= { lnFT 11 }
lnFTDomainSearchTotalTimeMS OBJECT-TYPE --<< INT ft.domain.search.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time spent performing all domain full text searches
in milliseconds."
::= { lnFT 12 }
lnFTIndexBytesPerHour OBJECT-TYPE --<< INT ft.index.bytes.perhour
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Full text indexing rate per hour of execution."
::= { lnFT 13 }
lnFTIndexCount OBJECT-TYPE --<< INT ft.index.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total full text indexing operations."
::= { lnFT 14 }
lnFTIndexDocumentsAdded OBJECT-TYPE --<< INT ft.index.documents.added
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of documents added to all full text indexes."
::= { lnFT 15 }
lnFTIndexDocumentsUpdated OBJECT-TYPE --<< INT ft.index.documents.updated
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents updated in all full text indexes."
::= { lnFT 16 }
lnFTIndexTotalBytes OBJECT-TYPE --<< INT ft.index.total.bytes
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total bytes added to all full text indexes."
::= { lnFT 17 }
lnFTIndexTotalTimeMS OBJECT-TYPE --<< INT ft.index.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time performing all full text indexing operations
in milliseconds."
::= { lnFT 18 }
lnFTSearchAverageTimeMS OBJECT-TYPE --<< INT ft.search.average.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average full text search time in milliseconds."
::= { lnFT 19 }
lnFTSearchCount OBJECT-TYPE --<< INT ft.search.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of all full text search operations."
::= { lnFT 20 }
lnFTSearchMaxActualHits OBJECT-TYPE --<< INT ft.search.max.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum documents found in a full text search."
::= { lnFT 21 }
lnFTSearchMaxResults OBJECT-TYPE --<< INT ft.search.max.results
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum documents returned in a full text search."
::= { lnFT 22 }
lnFTSearchTotalActualHits OBJECT-TYPE --<< INT ft.search.total.actualhits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents found in all full text searches."
::= { lnFT 23 }
lnFTSearchTotalResults OBJECT-TYPE --<< INT ft.search.total.results
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total documents returned in all full text searches."
::= { lnFT 24 }
lnFTSearchTotalTimeMS OBJECT-TYPE --<< INT ft.search.total.timems
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total time spent performing all full text searches in milliseconds."
::= { lnFT 25 }
lnICMCommandRedirectsClusterBusy OBJECT-TYPE --<< INT icm.command.redirects.clusterbusy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of commands received when all servers are busy."
::= { lnICM 1 }
lnICMCommandRedirectsSuccessful OBJECT-TYPE --<< INT icm.command.redirects.successful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of successful redirects."
::= { lnICM 2 }
lnICMCommandRedirectsUnsuccessful OBJECT-TYPE --<< INT icm.command.redirects.unsuccessful
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of unsuccessful redirects."
::= { lnICM 3 }
lnICMCommandTotal OBJECT-TYPE --<< INT icm.command.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of commands received."
::= { lnICM 4 }
lnICMCommandUnknown OBJECT-TYPE --<< INT icm.command.unknown
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of unknown commands received."
::= { lnICM 5 }
lnICMReceiveError OBJECT-TYPE --<< INT icm.receive.error
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of commands not received due to error."
::= { lnICM 6 }
lnICMRequestsPer1HourTotal OBJECT-TYPE --<< INT icm.requests.per1hour.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requests received in the last hour."
::= { lnICM 7 }
lnICMRequestsPer1MinuteTotal OBJECT-TYPE --<< INT icm.requests.per1minute.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requests in the last one minute."
::= { lnICM 8 }
lnICMRequestsPer5MinutesTotal OBJECT-TYPE --<< INT icm.requests.per5minutes.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of requests in the last 5 minutes."
::= { lnICM 9 }
lnICMSessionsThreadsBusy OBJECT-TYPE --<< INT icm.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of ICM server tasks currently running."
::= { lnICM 10 }
lnICMSessionsThreadsIdle OBJECT-TYPE --<< INT icm.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of ICM server tasks currently idle."
::= { lnICM 11 }
lnICMSessionsTotal OBJECT-TYPE --<< INT icm.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number ICM server tasks since server startup."
::= { lnICM 12 }
lnIMAPSessionsAcceptQueue OBJECT-TYPE --<< INT imap.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"IMAP listener work queue of incoming sessions to be processed."
::= { lnIMAP 1 }
lnIMAPSessionsActive OBJECT-TYPE --<< INT imap.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number IMAP server tasks."
::= { lnIMAP 2 }
lnIMAPSessionsInboundBytesReceived OBJECT-TYPE --<< INT imap.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this IMAP server."
::= { lnIMAP 3 }
lnIMAPSessionsInboundBytesSent OBJECT-TYPE --<< INT imap.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this IMAP server."
::= { lnIMAP 4 }
lnIMAPSessionsInboundNonSSL OBJECT-TYPE --<< INT imap.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server inbound TCP connections (non SSL)."
::= { lnIMAP 5 }
lnIMAPSessionsInboundSSL OBJECT-TYPE --<< INT imap.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP Server inbound SSL connections."
::= { lnIMAP 6 }
lnIMAPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT imap.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server SSL handshake failures."
::= { lnIMAP 7 }
lnIMAPSessionsInboundTotal OBJECT-TYPE --<< INT imap.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of IMAP server inbound connections (SSL & non SSL)."
::= { lnIMAP 8 }
lnIMAPSessionsPeak OBJECT-TYPE --<< INT imap.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number IMAP server tasks since server startup."
::= { lnIMAP 9 }
lnIMAPSessionsThreadsBusy OBJECT-TYPE --<< INT imap.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server tasks currently running."
::= { lnIMAP 10 }
lnIMAPSessionsThreadsIdle OBJECT-TYPE --<< INT imap.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IMAP server tasks currently idle."
::= { lnIMAP 11 }
lnIMAPSessionsTotal OBJECT-TYPE --<< INT imap.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number IMAP server tasks since server startup."
::= { lnIMAP 12 }
lnLDAPSessionsAcceptQueue OBJECT-TYPE --<< INT ldap.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"LDAP Listener work queue of incoming sessions to be processed."
::= { lnLDAP 1 }
lnLDAPSessionsActive OBJECT-TYPE --<< INT ldap.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number LDAP server tasks."
::= { lnLDAP 2 }
lnLDAPSessionsInboundBytesReceived OBJECT-TYPE --<< INT ldap.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this LDAP server."
::= { lnLDAP 3 }
lnLDAPSessionsInboundBytesSent OBJECT-TYPE --<< INT ldap.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this LDAP server."
::= { lnLDAP 4 }
lnLDAPSessionsInboundNonSSL OBJECT-TYPE --<< INT ldap.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server inbound TCP connections (non SSL)."
::= { lnLDAP 5 }
lnLDAPSessionsInboundSSL OBJECT-TYPE --<< INT ldap.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server inbound SSL connections."
::= { lnLDAP 6 }
lnLDAPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT ldap.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server SSL handshake failures."
::= { lnLDAP 7 }
lnLDAPSessionsInboundTotal OBJECT-TYPE --<< INT ldap.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of LDAP server inbound connections (SSL & non SSL)."
::= { lnLDAP 8 }
lnLDAPSessionsPeak OBJECT-TYPE --<< INT ldap.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number LDAP server tasks since server startup."
::= { lnLDAP 9 }
lnLDAPSessionsThreadsBusy OBJECT-TYPE --<< INT ldap.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server tasks currently running."
::= { lnLDAP 10 }
lnLDAPSessionsThreadsIdle OBJECT-TYPE --<< INT ldap.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of LDAP server tasks currently idle."
::= { lnLDAP 11 }
lnLDAPSessionsTotal OBJECT-TYPE --<< INT ldap.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number LDAP server tasks since server startup."
::= { lnLDAP 12 }
lnMailByDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnMailByDestEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information by mail destination."
::= { lnMailByDest 1 }
lnMailByDestEntry OBJECT-TYPE
SYNTAX LnMailByDestEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnMailByDestTable."
INDEX { lnMailByDestIndex }
::= { lnMailByDestTable 1 }
LnMailByDestEntry ::= SEQUENCE {
lnMailByDestIndex INTEGER,
lnMailByDestName DisplayString,
lnMailByDestDelivered INTEGER,
lnMailByDestTotalFailures INTEGER,
lnMailByDestTotalRouted INTEGER
}
lnMailByDestIndex OBJECT-TYPE --<< INDEX mailbydest.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnMailByDestTable."
::= { lnMailByDestEntry 1 }
lnMailByDestName OBJECT-TYPE --<< NAME mailbydest.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the mail destination."
::= { lnMailByDestEntry 2 }
lnMailByDestDelivered OBJECT-TYPE --<< INT mailbydest.*.delivered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of delivered messages."
::= { lnMailByDestEntry 3 }
lnMailByDestTotalFailures OBJECT-TYPE --<< INT mailbydest.*.totalfailures
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of mail failures."
::= { lnMailByDestEntry 4 }
lnMailByDestTotalRouted OBJECT-TYPE --<< INT mailbydest.*.totalrouted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of routed messages."
::= { lnMailByDestEntry 5 }
lnMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnMonitorEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about events."
::= { lnMonitor 1 }
lnMonitorEntry OBJECT-TYPE
SYNTAX LnMonitorEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnMonitorTable."
INDEX { lnMonitorIndex }
::= { lnMonitorTable 1 }
LnMonitorEntry ::= SEQUENCE {
lnMonitorIndex INTEGER,
lnMonitorName DisplayString,
lnMonitorFailure DisplayString,
lnMonitorFatal DisplayString,
lnMonitorHeartbeat INTEGER,
lnMonitorWarningHigh DisplayString
}
lnMonitorIndex OBJECT-TYPE --<< INDEX monitor.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnMonitorTable."
::= { lnMonitorEntry 1 }
lnMonitorName OBJECT-TYPE --<< NAME monitor.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the event."
::= { lnMonitorEntry 2 }
lnMonitorFailure OBJECT-TYPE --<< STRING monitor.*.failure
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Event queue failure."
::= { lnMonitorEntry 3 }
lnMonitorFatal OBJECT-TYPE --<< STRING monitor.*.fatal
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Event queue fatal error."
::= { lnMonitorEntry 4 }
lnMonitorHeartbeat OBJECT-TYPE --<< INT monitor.*.heartbeat
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Event heartbeat count."
::= { lnMonitorEntry 5 }
lnMonitorWarningHigh OBJECT-TYPE --<< STRING monitor.*.warning(high)
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Event queue failure warning."
::= { lnMonitorEntry 6 }
lnNNTPArticlesPosted OBJECT-TYPE --<< INT nntp.articles.posted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles posted to the NNTP server."
::= { lnNNTP 1 }
lnNNTPArticlesSent OBJECT-TYPE --<< INT nntp.articles.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles sent from the NNTP server."
::= { lnNNTP 2 }
lnNNTPBytesReceived OBJECT-TYPE --<< INT nntp.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes received by NNTP server."
::= { lnNNTP 3 }
lnNNTPBytesSent OBJECT-TYPE --<< INT nntp.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes sent from NNTP server."
::= { lnNNTP 4 }
lnNNTPPullArticlesFailed OBJECT-TYPE --<< INT nntp.pull.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers received by the NNTP
server during pull feeds."
::= { lnNNTP 5 }
lnNNTPPullArticlesOffered OBJECT-TYPE --<< INT nntp.pull.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered by the NNTP server during pull feeds."
::= { lnNNTP 6 }
lnNNTPPullArticlesRequested OBJECT-TYPE --<< INT nntp.pull.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested from the NNTP server during
pull feeds."
::= { lnNNTP 7 }
lnNNTPPullArticlesTransferred OBJECT-TYPE --<< INT nntp.pull.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred by the NNTP server during
pull feeds."
::= { lnNNTP 8 }
lnNNTPPushArticlesFailed OBJECT-TYPE --<< INT nntp.push.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers by the NNTP server during
push feeds."
::= { lnNNTP 9 }
lnNNTPPushArticlesOffered OBJECT-TYPE --<< INT nntp.push.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered by the NNTP server during push feeds."
::= { lnNNTP 10 }
lnNNTPPushArticlesRequested OBJECT-TYPE --<< INT nntp.push.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested from the NNTP server during
push feeds."
::= { lnNNTP 11 }
lnNNTPPushArticlesTransferred OBJECT-TYPE --<< INT nntp.push.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred by the NNTP server during
push feeds."
::= { lnNNTP 12 }
lnNNTPSessionsAcceptQueue OBJECT-TYPE --<< INT nntp.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"NNTP listener work queue of incoming sessions to be processed."
::= { lnNNTP 13 }
lnNNTPSessionsActive OBJECT-TYPE --<< INT nntp.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number NNTP server tasks."
::= { lnNNTP 14 }
lnNNTPSessionsInboundBytesReceived OBJECT-TYPE --<< INT nntp.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this NNTP server."
::= { lnNNTP 15 }
lnNNTPSessionsInboundBytesSent OBJECT-TYPE --<< INT nntp.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this NNTP server."
::= { lnNNTP 16 }
lnNNTPSessionsInboundNonSSL OBJECT-TYPE --<< INT nntp.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server inbound TCP connections (non SSL)."
::= { lnNNTP 17 }
lnNNTPSessionsInboundSSL OBJECT-TYPE --<< INT nntp.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server inbound SSL connections."
::= { lnNNTP 18 }
lnNNTPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT nntp.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server SSL handshake failures."
::= { lnNNTP 19 }
lnNNTPSessionsInboundTotal OBJECT-TYPE --<< INT nntp.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of NNTP server inbound connections (SSL & non SSL)."
::= { lnNNTP 20 }
lnNNTPSessionsOutgoingnonSSL OBJECT-TYPE --<< INT nntp.sessions.outgoing.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total outgoing non-SSL TCP connections."
::= { lnNNTP 21 }
lnNNTPSessionsOutgoingSSL OBJECT-TYPE --<< INT nntp.sessions.outgoing.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total outgoing SSL TCP connections."
::= { lnNNTP 22 }
lnNNTPSessionsPeak OBJECT-TYPE --<< INT nntp.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number NNTP server tasks since server startup."
::= { lnNNTP 23 }
lnNNTPSessionsThreadsBusy OBJECT-TYPE --<< INT nntp.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server tasks currently running."
::= { lnNNTP 24 }
lnNNTPSessionsThreadsIdle OBJECT-TYPE --<< INT nntp.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of NNTP server tasks currently idle."
::= { lnNNTP 25 }
lnNNTPSessionsTotal OBJECT-TYPE --<< INT nntp.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number NNTP server tasks since server startup."
::= { lnNNTP 26 }
lnNNTPServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnNNTPServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about NNTP remote servers."
::= { lnNNTP 27 }
lnNNTPServerEntry OBJECT-TYPE
SYNTAX LnNNTPServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnNNTPServerTable."
INDEX { lnNNTPServerIndex }
::= { lnNNTPServerTable 1 }
LnNNTPServerEntry ::= SEQUENCE {
lnNNTPServerIndex INTEGER,
lnNNTPServerName DisplayString,
lnNNTPServerArticlesPosted INTEGER,
lnNNTPServerArticlesSent INTEGER,
lnNNTPServerBytesReceived INTEGER,
lnNNTPServerBytesSent INTEGER,
lnNNTPServerPullArticlesFailed INTEGER,
lnNNTPServerPullArticlesOffered INTEGER,
lnNNTPServerPullArticlesRequested INTEGER,
lnNNTPServerPullArticlesTransferred INTEGER,
lnNNTPServerPushArticlesFailed INTEGER,
lnNNTPServerPushArticlesOffered INTEGER,
lnNNTPServerPushArticlesRequested INTEGER,
lnNNTPServerPushArticlesTransferred INTEGER
}
lnNNTPServerIndex OBJECT-TYPE --<< INDEX nntp.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnNNTPServerTable."
::= { lnNNTPServerEntry 1 }
lnNNTPServerName OBJECT-TYPE --<< NAME nntp.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the remote NNTP server."
::= { lnNNTPServerEntry 2 }
lnNNTPServerArticlesPosted OBJECT-TYPE --<< INT nntp.*.articles.posted
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles posted by the server 'RemoteServerName'
to the NNTP server."
::= { lnNNTPServerEntry 3 }
lnNNTPServerArticlesSent OBJECT-TYPE --<< INT nntp.*.articles.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles sent to the server 'RemoteServerName'
from the NNTP server."
::= { lnNNTPServerEntry 4 }
lnNNTPServerBytesReceived OBJECT-TYPE --<< INT nntp.*.bytes.received
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes received from the server 'RemoteServerName'
by the NNTP server."
::= { lnNNTPServerEntry 5 }
lnNNTPServerBytesSent OBJECT-TYPE --<< INT nntp.*.bytes.sent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of bytes sent to the server 'RemoteServerName' by the
NNTP server."
::= { lnNNTPServerEntry 6 }
lnNNTPServerPullArticlesFailed OBJECT-TYPE --<< INT nntp.*.pull.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers from the server
'RemoteServerName' to the NNTP server during pull feeds."
::= { lnNNTPServerEntry 7 }
lnNNTPServerPullArticlesOffered OBJECT-TYPE --<< INT nntp.*.pull.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered by the server 'RemoteServerName'
to the NNTP server during pull feeds."
::= { lnNNTPServerEntry 8 }
lnNNTPServerPullArticlesRequested OBJECT-TYPE --<< INT nntp.*.pull.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested from server 'RemoteServerName'
by the NNTP server during pull feeds."
::= { lnNNTPServerEntry 9 }
lnNNTPServerPullArticlesTransferred OBJECT-TYPE --<< INT nntp.*.pull.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred from 'RemoteServerName'
to the NNTP server during pull feeds."
::= { lnNNTPServerEntry 10 }
lnNNTPServerPushArticlesFailed OBJECT-TYPE --<< INT nntp.*.push.articles.failed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of failed news article transfers to server 'RemoteServerName'
by the NNTP server during push feeds."
::= { lnNNTPServerEntry 11 }
lnNNTPServerPushArticlesOffered OBJECT-TYPE --<< INT nntp.*.push.articles.offered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles offered to the server 'RemoteServerName'
by the NNTP server during push feeds."
::= { lnNNTPServerEntry 12 }
lnNNTPServerPushArticlesRequested OBJECT-TYPE --<< INT nntp.*.push.articles.requested
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles requested by the server 'RemoteServerName'
from the NNTP server during push feeds."
::= { lnNNTPServerEntry 13 }
lnNNTPServerPushArticlesTransferred OBJECT-TYPE --<< INT nntp.*.push.articles.transfered
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of news articles transferred to the server 'RemoteServerName'
by the NNTP server during push feeds."
::= { lnNNTPServerEntry 14 }
lnPOP3SessionsAcceptQueue OBJECT-TYPE --<< INT pop3.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"POP3 listener work queue of incoming sessions to be processed."
::= { lnPOP3 1 }
lnPOP3SessionsActive OBJECT-TYPE --<< INT pop3.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number of POP3 server tasks."
::= { lnPOP3 2 }
lnPOP3SessionsInboundBytesReceived OBJECT-TYPE --<< INT pop3.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this POP3 server."
::= { lnPOP3 3 }
lnPOP3SessionsInboundBytesSent OBJECT-TYPE --<< INT pop3.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this POP3 server."
::= { lnPOP3 4 }
lnPOP3SessionsInboundNonSSL OBJECT-TYPE --<< INT pop3.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server inbound TCP connections (non SSL)."
::= { lnPOP3 5 }
lnPOP3SessionsInboundSSL OBJECT-TYPE --<< INT pop3.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server inbound SSL connections."
::= { lnPOP3 6 }
lnPOP3SessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT pop3.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server SSL handshake failures."
::= { lnPOP3 7 }
lnPOP3SessionsInboundTotal OBJECT-TYPE --<< INT pop3.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of POP3 server inbound connections (SSL & non SSL)."
::= { lnPOP3 8 }
lnPOP3SessionsPeak OBJECT-TYPE --<< INT pop3.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number POP3 server tasks since server startup."
::= { lnPOP3 9 }
lnPOP3SessionsThreadsBusy OBJECT-TYPE --<< INT pop3.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server tasks currently running."
::= { lnPOP3 10 }
lnPOP3SessionsThreadsIdle OBJECT-TYPE --<< INT pop3.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of POP3 server tasks currently idle."
::= { lnPOP3 11 }
lnPOP3SessionsTotal OBJECT-TYPE --<< INT pop3.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number POP3 server tasks since server startup."
::= { lnPOP3 12 }
lnPOP3UserCacheAttempts OBJECT-TYPE --<< STRING pop3.usercache.attempts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"POP3 attempt to find user in cache."
::= { lnPOP3 13 }
lnPOP3UserCacheHits OBJECT-TYPE --<< STRING pop3.usercache.hits
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Found in cache."
::= { lnPOP3 14 }
lnPOP3UserCacheInserts OBJECT-TYPE --<< STRING pop3.usercache.inserts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Successful insert into cache."
::= { lnPOP3 15 }
lnPOP3UserCacheLookups OBJECT-TYPE --<< STRING pop3.usercache.lookups
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"POP3 successful lookup user in cache."
::= { lnPOP3 16 }
lnPOP3UserCacheOpenReasonCacheFull OBJECT-TYPE --<< STRING pop3.usercache.openreasoncachefull
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Cache full."
::= { lnPOP3 17 }
lnPOP3UserCacheOpenReasonDBChanged OBJECT-TYPE --<< STRING pop3.usercache.openreasondbchanged
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Reason for open is DB changed."
::= { lnPOP3 18 }
lnPOP3UserCacheOpenReasonNewEntry OBJECT-TYPE --<< STRING pop3.usercache.openreasonnewentry
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Reason for open is new entry."
::= { lnPOP3 19 }
lnQOSMailISpyProbeError OBJECT-TYPE --<< STRING qos.mail.ispy.probeerror
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"Mail Probe Error."
::= { lnQOS 1 }
lnQOSMailProbeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnQOSMailProbeEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing information about mail probes."
::= { lnQOS 2 }
lnQOSMailProbeEntry OBJECT-TYPE
SYNTAX LnQOSMailProbeEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnQOSMailProbeTable."
INDEX { lnQOSMailProbeIndex }
::= { lnQOSMailProbeTable 1 }
LnQOSMailProbeEntry ::= SEQUENCE {
lnQOSMailProbeIndex INTEGER,
lnQOSMailProbeName DisplayString,
lnQOSMailISpyResponseTime INTEGER
}
lnQOSMailProbeIndex OBJECT-TYPE --<< INDEX qos.mail.ispy.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnQOSMailProbeTable."
::= { lnQOSMailProbeEntry 1 }
lnQOSMailProbeName OBJECT-TYPE --<< NAME qos.mail.ispy.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the server."
::= { lnQOSMailProbeEntry 2 }
lnQOSMailISpyResponseTime OBJECT-TYPE --<< INT qos.mail.ispy.*.responsetime
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Mail Probe response time."
::= { lnQOSMailProbeEntry 3 }
lnReporterTimeAnalysis OBJECT-TYPE --<< TIME reporter.time.analysis
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time stats were analyzed."
::= { lnReporter 1 }
lnReporterTimeCollected OBJECT-TYPE --<< TIME reporter.time.collected
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time stats were collected."
::= { lnReporter 2 }
lnReporterTimeElapsed OBJECT-TYPE --<< TIME reporter.time.elapsed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Time since reporter was started."
::= { lnReporter 3 }
lnSEMTimeouts OBJECT-TYPE --<< STRING sem.timeouts
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"OS Sem timeout."
::= { lnSem 1 }
lnSMTPMessagesProcessed OBJECT-TYPE --<< INT smtp.messagesprocessed
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP messages processed."
::= { lnSMTP 1 }
lnSMTPSessionsAcceptQueue OBJECT-TYPE --<< INT smtp.sessions.accept.queue
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SMTP listener work queue of incoming sessions to be processed."
::= { lnSMTP 2 }
lnSMTPSessionsActive OBJECT-TYPE --<< INT smtp.sessions.active
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Current number SMTP server tasks."
::= { lnSMTP 3 }
lnSMTPSessionsInboundBytesReceived OBJECT-TYPE --<< INT smtp.sessions.inbound.bytesreceived
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes received by this SMTP server."
::= { lnSMTP 4 }
lnSMTPSessionsInboundBytesSent OBJECT-TYPE --<< INT smtp.sessions.inbound.bytessent
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of bytes sent by this SMTP server."
::= { lnSMTP 5 }
lnSMTPSessionsInboundNonSSL OBJECT-TYPE --<< INT smtp.sessions.inbound.non-ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server inbound TCP connections (non SSL)."
::= { lnSMTP 6 }
lnSMTPSessionsInboundSSL OBJECT-TYPE --<< INT smtp.sessions.inbound.ssl
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server inbound SSL connections."
::= { lnSMTP 7 }
lnSMTPSessionsInboundSSLBadHandshake OBJECT-TYPE --<< INT smtp.sessions.inbound.ssl.bad_handshake
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server SSL handshake failures."
::= { lnSMTP 8 }
lnSMTPSessionsInboundTotal OBJECT-TYPE --<< INT smtp.sessions.inbound.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number of SMTP server inbound connections (SSL & non SSL)."
::= { lnSMTP 9 }
lnSMTPSessionsPeak OBJECT-TYPE --<< INT smtp.sessions.peak
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Peak number SMTP server tasks since server startup."
::= { lnSMTP 10 }
lnSMTPSessionsThreadsBusy OBJECT-TYPE --<< INT smtp.sessions.threads.busy
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server tasks currently running."
::= { lnSMTP 11 }
lnSMTPSessionsThreadsIdle OBJECT-TYPE --<< INT smtp.sessions.threads.idle
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of SMTP server tasks currently idle."
::= { lnSMTP 12 }
lnSMTPSessionsTotal OBJECT-TYPE --<< INT smtp.sessions.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total number SMTP server tasks since server startup."
::= { lnSMTP 13 }
lnSMTPStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnSMTPStatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing various information about various SMTP statistics."
::= { lnSMTP 14 }
lnSMTPStatEntry OBJECT-TYPE
SYNTAX LnSMTPStatEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnSMTPStatTable."
INDEX { lnSMTPStatIndex }
::= { lnSMTPStatTable 1 }
LnSMTPStatEntry ::= SEQUENCE {
lnSMTPStatIndex INTEGER,
lnSMTPStatName DisplayString,
lnSMTPAve INTEGER,
lnSMTPCount INTEGER,
lnSMTPMax INTEGER,
lnSMTPMin INTEGER,
lnSMTPTotal INTEGER
}
lnSMTPStatIndex OBJECT-TYPE --<< INDEX smtp.*
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"A unique value for each entry in the lnSMTPStatTable."
::= { lnSMTPStatEntry 1 }
lnSMTPStatName OBJECT-TYPE --<< NAME smtp.*
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the statistic."
::= { lnSMTPStatEntry 2 }
lnSMTPAve OBJECT-TYPE --<< INT smtp.*.ave
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average for this SMTP statistic."
::= { lnSMTPStatEntry 3 }
lnSMTPCount OBJECT-TYPE --<< INT smtp.*.count
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count for this SMTP statistic."
::= { lnSMTPStatEntry 4 }
lnSMTPMax OBJECT-TYPE --<< INT smtp.*.max
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum for this SMTP statistic."
::= { lnSMTPStatEntry 5 }
lnSMTPMin OBJECT-TYPE --<< INT smtp.*.min
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Minimum for this SMTP statistic."
::= { lnSMTPStatEntry 6 }
lnSMTPTotal OBJECT-TYPE --<< INT smtp.*.total
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Total for this SMTP statistic."
::= { lnSMTPStatEntry 7 }
lnSpinAvtIterToHit OBJECT-TYPE --<< INT spin.avtitertohit
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Average of Spin Lock Iterations to Hits."
::= { lnSpin 1 }
lnSpinDelays OBJECT-TYPE --<< INT spin.delays
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of Spin Lock Delays."
::= { lnSpin 2 }
lnSpinDelaysMsecs OBJECT-TYPE --<< INT spin.delaysmsecs
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock Delay in msecs."
::= { lnSpin 3 }
lnSpinFRWSemGetReadExt OBJECT-TYPE --<< INT spin.frwsemgetreadext
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock FRW semaphore read."
::= { lnSpin 4 }
lnSpinFRWSemPutReadExt OBJECT-TYPE --<< INT spin.frwsemputreadext
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock frw semaphore put."
::= { lnSpin 5 }
lnSpinHits OBJECT-TYPE --<< INT spin.hits
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Count of Spin Lock Hits."
::= { lnSpin 6 }
lnSpinMaxDelayMask OBJECT-TYPE --<< INT spin.maxdelaymask
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock max delay mask."
::= { lnSpin 7 }
lnSpinMaxDelayMsecs OBJECT-TYPE --<< INT spin.maxdelaymsecs
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"SpinLock max delay in msecs."
::= { lnSpin 8 }
-- End of the lnStats branch.
lnMIBVersion OBJECT-TYPE -- Internally implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Domino SNMP support level (MIB Version)."
::= { lnInfo 3 }
lnQSBuildNumber OBJECT-TYPE -- Internally implemented.
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The build number of the Query/Set Notes add-in task."
::= { lnInfo 5 }
-- End of the lnInfo branch.
lnNotesServerSetState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set to 'down' to shut Notes server down, set to 'up' to
restart Notes server. Note: access to this feature is
controlled through external (non-SNMP) security measures."
::= { lnControl 1 }
lnNotesServerState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
not-responding(3),
crashed(4),
unknown(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Equals 'down' if the Notes server is down, equals 'up'
if the Notes server is running."
::= { lnControl 2 }
lnLastTrapSeq OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sequence number of last trap sent. Same as the
index number that trap in the lnRecentTrapsTable."
::= { lnControl 3 }
lnRecentTrapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnRecentTrapsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing the last 10 generated traps."
::= { lnControl 4 }
lnRecentTrapsEntry OBJECT-TYPE
SYNTAX LnRecentTrapsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The entry type definition for the lnRecentTrapsTable."
INDEX { lnTrapSeq }
::= { lnRecentTrapsTable 1 }
LnRecentTrapsEntry ::= SEQUENCE {
lnTrapSeq INTEGER,
lnTrapInfo DisplayString
}
lnTrapSeq OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each trap record in the sequence
of entries returned to the lnRecentTrapsTable."
::= { lnRecentTrapsEntry 1 }
lnTrapInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A string containing the information for a trap."
::= { lnRecentTrapsEntry 2 }
lnRemoteReboot OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set to 'yes' to reboot the entire system.
This value will be returned as 'yes' if the system is in
the process of rebooting but hasn't come down yet."
::= { lnControl 5 }
lnServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF LnServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"A table containing the list of Domino Servers that have been
partitioned across this machine. This must be configured by the
system administrator. This table only reflects the Domino Servers
that are listed in the file lnsnmp.ini since there is no way to
query a given machine for a list of potentially available servers."
::= { lnControl 6 }
lnTotalPartitions OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the file lnsnmp.ini exists, this MIB variable will represent
the number of 'Server=' entries in that file. If the file lnsnmp.ini
does not exist, the value of lnTotalPartitions will equal zero."
::= { lnControl 7 }
lnMPAIniFileLocation OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The directory that the file lnsnmp.ini was read from.
Normally this is either the Windows-NT directory or this will
be /opt/lotus for UNIX systems. However, on either platform, if
the file is not found, the PATH environment variable will be
searched. The first instance of lnsnmp.ini in the PATH will
be opened."
::= { lnControl 8 }
lnServerEntry OBJECT-TYPE
SYNTAX LnServerEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"The entry type definition for the lnServerTable."
INDEX { lnServerTblIndex }
::= { lnServerTable 1 }
LnServerEntry ::= SEQUENCE {
lnServerTblIndex INTEGER,
lnServerTblName DisplayString,
lnServerTblNotesPartition INTEGER,
lnServerTblDataDir DisplayString,
lnServerTblDataDirValid INTEGER,
lnServerTblState INTEGER,
lnServerIdentifiedItself INTEGER,
lnServerTblSetState INTEGER
}
lnServerTblIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The MIB index for this row in the lnServerTable."
::= { lnServerEntry 1 }
lnServerTblName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The name of the server as it appears in lnsnmp.ini.
However, if a server's addin task registers with the Main Proxy Agent,
The addin task will update the server's name with the correct name
if a match can be found."
::= { lnServerEntry 2 }
lnServerTblNotesPartition OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The value that is entered in lnsnmp.ini.
This MUST match the environment variable NOTESPARTITION for
Domino Servers partitioned on Windows-NT Systems. This
has no real meaning for Domino Servers on UNIX platforms."
::= { lnServerEntry 3 }
lnServerTblDataDir OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The data directory of the given Domino server as entered
in lnsnmp.ini; See lnServerTblDataDirValid for an indication on
whether or not this is a valid Domino Server data directory."
::= { lnServerEntry 4 }
lnServerTblDataDirValid OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The Main Proxy Agent validates the Domino Server data directory
that is entered in lnsnmp.ini. This will be TRUE if this is a valid
directory and the file notes.ini exists within that directory.
It will be false otherwise."
::= { lnServerEntry 5 }
lnServerTblState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This will indicate the current state of the server. The server will
be considered down until at least one of the Domino Management Agent
tasks starts and registers with the Main Proxy Agent."
::= { lnServerEntry 6 }
lnServerIdentifiedItself OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"This will indicate if the server has ever run and identified
itself to the Main Proxy Agent at any time during the current
lifespan of the Main Proxy Agent. This may be used as an
indication that a given Domino server may not be configured
correctly in lnsnmp.ini. The server identification occurs when
one of the Domino Management Agent addin tasks is started."
::= { lnServerEntry 7 }
lnServerTblSetState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-write
STATUS optional
DESCRIPTION
"This will indicate the current state of the Domino server and
allow remote SNMP control over stopping & starting the Domino
server. The server will be considered down until at least one
of the Domino management Agent addin tasks starts and registers
with the Main Proxy Agent."
::= { lnServerEntry 8 }
lnEvtServer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Originating server for this event."
::= { lnInterceptor 1 }
lnEvtType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
communications(1),
security(2),
mail(3),
replication(4),
resource(5),
miscellaneous(6),
server(7),
alarm(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns a value for the type of this event."
::= { lnInterceptor 2 }
lnEvtSeverity OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
fatal(1),
failure(2),
warning1(3),
warning2(4),
normal(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns a value for the severity of this event."
::= { lnInterceptor 3 }
lnEvtWhen OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns a value for the date and time of this event."
::= { lnInterceptor 4 }
lnEvtData OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Information about this event."
::= { lnInterceptor 5 }
lnEvtSeq OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sequence number of this event for internal
use only. This information is not available in
this MIB variable. If you wish to determine the
sequence number for the last trap, please see
the variable lnControl.lnRecentTrapsTable.lnRecentTrapEntry.lnTrapSeq."
::= { lnInterceptor 6 }
-- ** Define the Unix specific variables.
lnAlarm OBJECT IDENTIFIER ::= { lnUnix 1 }
lnSignal OBJECT IDENTIFIER ::= { lnUnix 2 }
-- ** Define the trap variables used in the Alarm Manager, nvalarmgrd
lnAlarmServerHandle OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the server for which the alarm will be generated for."
::= { lnAlarm 1 }
lnAlarmTargetHandle OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This represents the entity on the server that caused the alarm
to be generated."
::= { lnAlarm 2 }
lnAlarmDate OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The date the alarm occured."
::= { lnAlarm 3 }
lnAlarmTime OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The time the alarm occured."
::= { lnAlarm 4 }
lnAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
informational(1),
disabled(2),
unmanaged(3),
unknown(4),
marginal(5),
warning(6),
minor(7),
major(8),
critical(9)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"The severity of the alarm being generated by the SNMP trap."
::= { lnAlarm 5 }
lnAlarmIntArg OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"Returns a value for the integer argument associated with the Alarm."
::= { lnAlarm 6 }
lnAlarmLongArg OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"The long integer argument associated with the Alarm."
::= { lnAlarm 7 }
lnAlarmDoubleArg OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS optional
DESCRIPTION
"The string representation of a floating point value."
::= { lnAlarm 8 }
lnAlarmTextArg1 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS optional
DESCRIPTION
"The first text argument associated with the Alarm."
::= { lnAlarm 9 }
lnAlarmTextArg2 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS optional
DESCRIPTION
"The second text argument associated with the Alarm."
::= { lnAlarm 10 }
lnAlarmSeverityStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A string representation of the alarm severity. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards."
::= { lnAlarm 11 }
lnAlarmTypeStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A string representation of the alarm's type. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards."
::= { lnAlarm 12 }
lnAlarmMessage OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A message indicating why the alarm was raised. This is
used in the trap that is sent to the management station to
be displayed on the NetView event cards."
::= { lnAlarm 13 }
lnAlarmMessageExt OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"A message extension with more detailed information explaining
why the alarm was raised. This is used in the trap that is sent
to the management station to be displayed on the NetView event
cards."
::= { lnAlarm 14 }
lnAlarmServerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The server name of the Notes server the alarm was raised
against. This is used in the trap that is sent to the management
station to be displayed in the NetView event cards."
::= { lnAlarm 15 }
--Define some variables for signals and messages
lnSignalServerId OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer that represents the ServerId of the
Notes server that caused the signal to be raised."
::= { lnSignal 1 }
lnSignalOldServerType OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an the integer value representing the old server class."
::= { lnSignal 2 }
lnSignalNewServerType OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer value representing the new server class."
::= { lnSignal 3 }
lnSignalWhatHasChanged OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS optional
DESCRIPTION
"This variable will be embedded in the lnSignalServerConfigChg trap.
This is an integer value indicating what has changed on the server."
::= { lnSignal 4 }
lnSignalServerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS optional
DESCRIPTION
"The server name. This will appear in the information trap
displayed in the NetView Event Cards when a specific server has
had all its alarms cleared."
::= { lnSignal 5 }
--Define the traps
lnUnknownEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Unknown severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 0
lnFatalEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Fatal severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 1
lnFailureEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Failure severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 2
lnWarning1EventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Warning1 severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 3
lnWarning2EventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Warning2 severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 4
lnNormalEventTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer, lnEvtType, lnEvtSeverity,
lnEvtWhen, lnEvtData, lnEvtSeq }
DESCRIPTION
"This trap indicates that a Notes Event of Normal severity
has occurred. Configuration of which events generated traps
is performed in the Public Address book."
::= 5
lnServerUpTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server has come up."
::= 11
lnServerDownTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server has gone down."
::= 12
lnServerPulseFailedTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server is not responding
to the Lotus Notes SNMP agent. The server may have crashed,
or may be busy."
::= 13
lnServerPulseRestoredTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server is now responding
to the Lotus Notes SNMP agent."
::= 14
lnSystemRebootingTrap TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap indicates that the operating system the Notes server is
running has recieved an SNMP reboot request. The system is
now rebooting, this may take up to 5 minutes."
::= 15
lnServerNotRespondingTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server has not responded
to the Lotus Notes SNMP agent for several minutes. There is
a chance that the Notes server may have crashed."
::= 16
lnServerNowRespondingTrap TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnEvtServer }
DESCRIPTION
"This trap indicates that the Notes server is now responding
to the Lotus Notes SNMP agent after failing to respond for several
minutes. The server may be overloaded."
::= 17
--
--"Alarm" traps generated by NotesView for AIX (or future Unix ports)
--
lnAlarmStatisticThreshold TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when an alarm statistic
threshold is hit."
::= 30
lnAlarmServerStatusChange TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when the alarm status
of the server changes."
::= 31
lnAlarmPortStatusChange TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when the alarm status
of a port changes."
::= 32
lnAlarmTaskStatusChange TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when the alarm status
of a permanent task changes."
::= 33
lnAlarmNVStatClear TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX to indicate that
an alarm statistic threshold condition has been cleared."
::= 34
lnAlarmAutoDiscovery TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX to indicate a discrepancy
between the information that Autodiscovery has detected, and what
the server has reported."
::= 35
lnAlarmServerNotesEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX when a Notes
server event occurs."
::= 36
lnAlarmServerCfgChangeEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the server
configuration has changed."
::= 37
lnAlarmMailProbeEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the Mail Probe
task needs to generate an alarm."
::= 38
lnAlarmNSFRemoteConsoleEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the there is an
NSF remote console event."
::= 40
lnAlarmMailBoxEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the there
is a MailBox event."
::= 41
lnAlarmServerSNMPEvent TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle, lnAlarmTargetHandle, lnAlarmDate,
lnAlarmTime, lnAlarmSeverity, lnAlarmIntArg, lnAlarmLongArg,
lnAlarmDoubleArg, lnAlarmTextArg1, lnAlarmTextArg2 }
DESCRIPTION
"This trap is sent by NotesView for AIX if the there is an
SNMP event that generates an alarm."
::= 39
lnAlarmClearAll TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap is sent by NotesView for AIX to cause the
alarm manager daemon (nvalarmgrd) to clear all alarms for all
servers and connections. The status of all objects on the map
will be reset to UNKNOWN."
::= 50
lnAlarmClearServers TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle }
DESCRIPTION
"This trap is sent by NotesView for AIX to cause the
alarm manager daemon (nvalarmgrd) to clear all alarms for a given
server or group of servers. The status of all the connections
for each serverId specified in the PDU will also be cleared.
The resulting status of all related objects on the map will
be reset to UNKNOWN."
::= 51
lnSignalAutodiscoveryStart TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap is sent by the NotesView for AIX console when
the Autodiscovery process starts. The NotesView Alarm Manager
daemon (nvalarmgrd) will suspends all Alarm processing until
the Autodiscovery process is complete."
::= 52
lnSignalAutodiscoveryFinished TRAP-TYPE
ENTERPRISE notes
DESCRIPTION
"This trap will be used by NotesView for AIX to signal the
Alarm Manager daemon (nvalarmgrd) that the Autodiscovery process
has completed or stopped. Alarm processing will continue at
this point, and all alarms that were received during Autodiscovery
will be processed."
::= 53
lnSignalServerConfigChg TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnSignalServerId, lnSignalOldServerType,
lnSignalNewServerType, lnSignalWhatHasChanged }
DESCRIPTION
"This trap will be used by NotesView for AIX to signal the
Alarm Manager daemon (nvalarmgrd) that there has been
a Notes server configuration change."
::= 54
lnTrapRequestMostSevereStatus TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmServerHandle }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
needs to be updated with the most severe status of a given object."
::= 55
lnTrapDisplayAlarmClearServers TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnSignalServerId, lnSignalServerName }
DESCRIPTION
"This trap will be generated by the NotesView Alarm Manager in
order to display which server had its alarms cleared as a result
of receiving lnAlarmClearServers (trap type 51). One of these
traps will be generated for each server bound in the PDU for
the lnAlarmClearServers trap. For display only. The Alarm Manager
does not do any processing for this trap."
::= 60
lnTrapDisplayClearedAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a clearing alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 70
lnTrapDisplayIndeterminateAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives an indeterminate alarm from the poller (or console) to
display the alarm information on the NetView event cards. The alarms
are configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 71
lnTrapDisplayWarningAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a warning alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed on the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 72
lnTrapDisplayMinorAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a minor alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 73
lnTrapDisplayCriticalAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a critical alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 74
lnTrapDisplayMajorAlarm TRAP-TYPE
ENTERPRISE notes
VARIABLES { lnAlarmSeverityStr, lnAlarmTypeStr,
lnAlarmMessage, lnAlarmMessageExt }
DESCRIPTION
"This trap will be sent by the NotesView management station when it
receives a major alarm from the poller (or console) to display the
alarm information on the NetView event cards. The alarms are
configured not to be displayed in the event cards, since the PDU
of an Alarm trap doesn't contain any information useful to
the user. Once the alarm is received, the PDU is deciphered and
this informational trap is generated by the NotesView Alarm Manager."
::= 75
END
