lgpEnvTemperature This sub-tree is used to register Liebert temperature object identifiers.

lgpEnvHumidity This sub-tree is used to register Liebert humidity object identifiers.

lgpEnvState This sub-tree is used to register Liebert environmental state object identifiers.

lgpEnvConfig This sub-tree is used to register Liebert environmental configuration object identifiers.

lgpEnvControl This sub-tree is used to register Liebert environmental control object identifiers.

lgpEnvStatistics This sub-tree is used to register Liebert environmental statistic object identifiers.

lgpEnvTemperatureWellKnown Liebert well known temperature objects are identified by OIDs that reside in this sub-tree.

lgpEnvTemperatureFahrenheit This sub-tree contains OIDs that are used to control and monitor temperature using the Fahrenheit temperature scale.

lgpEnvTemperatureCelsius This sub-tree contains OIDs that are used to control and monitor temperature using the Celsius temperature scale.

lgpEnvTemperatureControlMode A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature object that is used for control.

lgpEnvHumidityWellKnown Liebert well known humidity objects are defined by OIDs that reside in this sub-tree.

lgpEnvHumidityRelative This sub-tree contains OIDs that are used to control and monitor relative humidity.

lgpEnvStateSystem The present state of the system.

lgpEnvStateCooling The present state of the cooling subsystem.

lgpEnvStateHeating The present state of the heating subsystem.

lgpEnvStateHumidifying The present state of the humidifier subsystem.

lgpEnvStateDehumidifying The present state of the dehumidifier subsystem

lgpEnvStateEconoCycle The present state of the Econ-o-cycle subsystem.

lgpEnvStateFan The present state of the system fan.

lgpEnvStateGeneralAlarmOutput The present state of the general alarm output.

lgpEnvStateCoolingCapacity The percentage of the cooling capacity presently in use.

lgpEnvStateHeatingCapacity The percentage of the heating capacity presently in use.

lgpEnvStateAudibleAlarm The present state of the audible alarm output.

lgpEnvStateCoolingUnits This sub-tree contains OIDs that are used to indicate the status of cooling units.

lgpEnvStateCoolingUnit1 The present state of cooling unit 1.

lgpEnvStateCoolingUnit2 The present state of cooling unit 2.

lgpEnvStateHeatingUnits This sub-tree contains OIDs that are used to indicate the status of heating units.

lgpEnvStateHeatingUnit1 The present state of heating unit 1.

lgpEnvStateHeatingUnit2 The present state of heating unit 2.

lgpEnvConfigReheatLockout If locked-out the reheats will not operate even if controller calls for its operation.

lgpEnvConfigHumLockout If locked-out the humidifier will not operate even if controller calls for its operation.

lgpEnvConfigRestartDelay When utility power is disrupted, this is the delay interval to wait before restarting the system after the utility power is restored. A Restart Delay of zero denotes a manual restart, the unit will NOT automatically restart.

lgpEnvConfigRemoteShutdown When in the disabled state, the remote shutdown feature should be locked out.  The enabled state is self-describing.

lgpEnvConfigCoolingServiceInterval The amount of time, in hours, between scheduled maintenance of the cooling system.  When the cooling service timer reaches this value an lgpConditionServiceCooling will be activated. Once service has been completed the cooling service timer should be reset to 0.

lgpEnvConfigHumidifierServiceInterval The amount of time, in hours, between scheduled maintenance of the humidifier.  When the humidifier service timer reaches this value an lgpConditionServiceHumidifier will be activated. Once service has been completed humidifier service timer should be reset to 0.

lgpEnvConfigFilterServiceInterval The amount of time, in hours, between scheduled maintenance of the system filter.  When the filter service timer reaches this value an lgpConditionChangeFilter will be activated.  Once service has been completed the filter service timer should be reset to 0.

lgpEnvControlShutdownAfterDelay Setting this object will shutdown (i.e., turn off) the system after the indicated number of seconds. Setting this object to 0 will cause the shutdown to occur immediately.  Setting this object to -1 will abort the countdown.  If the system is already in the desired state at the time the countdown reaches 0, then nothing will happen.  When read, lgpEnvControlShutdownAfterDelay will return the number of seconds remaining until shutdown, or -1 if no shutdown countdown is in effect.  On some systems, if the agent is restarted while a shutdown countdown is in effect, the countdown may be aborted.  Sets to this object override any lgpEnvControlShutdownAfterDelay already in effect.

lgpEnvControlStartupAfterDelay Setting this object will start the system after the indicated number of seconds.  Setting this object to 0 will cause the startup to occur immediately.  Setting this object to -1 will abort the countdown.  If the system is already on at the time the countdown reaches 0, then nothing will happen.  Sets to this object override the effect of any lgpEnvControlStartupAfterDelay countdown in progress.  When read, lgpEnvControlStartupAfterDelay will return the number of seconds until startup, or -1 if no startup countdown is in effect.  On some systems, if the agent is restarted while a startup countdown is in effect, the countdown is aborted.

lgpEnvStatisticsComp1RunHr Accumulated run hours of compressor 1.

lgpEnvStatisticsComp2RunHr Accumulated run hours of compressor 2.

lgpEnvStatisticsFanRunHr Accumulated run hours of the main fan.

lgpEnvStatisticsHumRunHr Accumulated run hours of the humidifier.

lgpEnvStatisticsReheat1RunHr Accumulated run hours of reheat element 1, or hot water reheat.

lgpEnvStatisticsReheat2RunHr Accumulated run hours of reheat element 2.

lgpEnvStatisticsCoolingModeHrs Accumulated run hours while lgpEnvStateCooling is on(1).

lgpEnvStatisticsHeatingModeHrs Accumulated run hours while lgpEnvStateHeating is on(1).

lgpEnvStatisticsHumidifyModeHrs Accumulated run hours while lgpEnvStateHumidifying is on(1).

lgpEnvStatisticsDehumidifyModeHrs Accumulated run hours while lgpEnvStateDehumidifying is on(1).

lgpEnvControlTemperature Temperature measurement used as control feedback.

lgpEnvReturnAirTemperature Temperature measurement of return air.

lgpEnvSupplyAirTemperature Temperature measurement of supply air.

lgpAmbientTemperature Ambient temperature measurement.

lgpInverterTemperature Temperature measurement of the inverter.

lgpBatteryTempterature Temperature measurement of the battery.

lgpAcDcConverterTemperature Temperature measurement of the AC-to-DC Converter.

lgpPfcTemperature Temperature measurement of the power factor correction circuitry.

lgpTransformerTemperature Temperature measurement of the transformer.

lgpLocalTemperature Temperature measurement of local temperature sensor.

lgpLocal1Temperature Temperature measurement of local temperature sensor 1.

lgpLocal2Temperature Temperature measurement of local temperature sensor 2.

lgpEnvTemperatureSettingDegF The temperature setting used to control the well known temperature object 'lgpEnvControlTemperature'.  This setting is cloned in 'lgpEnvTemperatureSettingDegC' with the value converted to Celsius.

lgpEnvTemperatureToleranceDegF The acceptable variance from 'lgpEnvTemperatureSettingDegF', without initiating a control action.  This setting is cloned in 'lgpEnvTemperatureToleranceDegC' with the value converted to Celsius.

lgpEnvTemperatureTableDegF A list of temperature table entries.  The table contains zero, one, or many rows, depending upon the number of temperature objects available.  The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device.  The entries in this table are cloned in 'lgpEnvTemperatureTableDegC' where Fahrenheit values are converted to Celsius.

lgpEnvTemperatureEntryDegF This entry defines the contents of the rows for the table 'lgpEnvTemperatureTableDegF'.

lgpEnvTemperatureIdDegF This OID is used as an index to identify a row in the table 'lgpEnvTemperatureTableDegF'.

lgpEnvTemperatureDescrDegF A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature.

lgpEnvTemperatureMeasurementDegF The measured temperature value.

lgpEnvTemperatureHighThresholdDegF The high temperature notification threshold.  This is the maximum value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a notification.

lgpEnvTemperatureLowThresholdDegF The low temperature notification threshold.  This is the minimum value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a notification.

lgpEnvTemperatureSettingDegC The temperature setting used to control the well known temperature object 'lgpEnvControlTemperature'.  This setting is cloned in 'lgpEnvTemperatureSettingDegF' with the value converted to Fahrenheit.

lgpEnvTemperatureToleranceDegC The acceptable variance from 'lgpEnvTemperatureSettingDegC', without initiating a control action.  This setting is cloned in 'lgpEnvTemperatureToleranceDegF' with the value converted to Fahrenheit.

lgpEnvTemperatureTableDegC A list of temperature table entries.  The table contains zero, one, or many rows, depending upon the number of temperature objects available.  The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device.  The entries in this table are cloned in 'lgpEnvTemperatureTableDegF' where Celsius values are converted to Fahrenheit.

lgpEnvTemperatureEntryDegC This entry defines the contents of the rows for the table 'lgpEnvTemperatureTableDegC'.

lgpEnvTemperatureIdDegC This OID is used as an index to identify a row in the table 'lgpEnvTemperatureTableDegC'.

lgpEnvTemperatureDescrDegC A reference to a temperature description object. The object referenced should not be accessible, but rather be used to provide a unique description of the temperature.

lgpEnvTemperatureMeasurementDegC The measured temperature value.

lgpEnvTemperatureHighThresholdDegC The high temperature notification threshold.  This is the maximum value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a notification.

lgpEnvTemperatureLowThresholdDegC The low temperature notification threshold.  This is the minimum value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a notification.

lgpEnvControlHumidity Humidity measurement used as control feedback.

lgpEnvReturnAirHumidity Humidity measurement of return air.

lgpEnvSupplyAirHumidity Humidity measurement of supply air.

lgpEnvHumiditySettingRel The humidity setting used to control the well known humidity object 'lgpEnvControlHumidity'.  The humidity scale is determined by 'lgpEnvTemperatureControlScale'.

lgpEnvHumidityToleranceRel Acceptable variance from lgpEnvHumiditySetting, without initiating a control action.

lgpEnvHumidityTableRel A list of humidity table entries.  The table contains zero, one, or many rows, depending upon the number of humidity objects available. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device.

lgpEnvHumidityEntryRel This entry defines the contents of the rows for the table 'lgpEnvHumidityTableRel'.

lgpEnvHumidityIdRel This OID is used as an index to identify a row in the table 'lgpEnvHumidityTableRel'.

lgpEnvHumidityDescrRel A reference to a humidity description object. The object referenced should not be accessible, but rather be used to provide a unique description of the humidity.

lgpEnvHumidityMeasurementRel The measured humidity value.

lgpEnvHumidityHighThresholdRel The high humidity notification threshold.  This is the maximum value of 'lgpEnvHumidityMeasurementRel' before the agent sends a notification.

lgpEnvHumidityLowThresholdRel The low humidity notification threshold.  This is the minimum value of 'lgpEnvHumidityMeasurementRel' before the agent sends a notification.