ipMonitor :: IF-MIB: Cisco Interfaces

Welcome: Guest

Search for: in

NOTE: This site is no longer maintained. Upgrade to the latest version of ipMonitor »

Portal Home

Downloads & Resources

Knowledge Center

>   Administrator's Guide

>   Tutorials

>   Tips

>   FAQs

>   SOAP Documentation

SNMP Center

>   OID Tree

>   MIBs, By Name

>   MIBs, By Category

SNMP Center > Mibs > Item Details
Global OID Tree IF-MIB: Cisco Interfaces

Scan SNMP Device

IP Address or Domain Name:

Note: Traffic will only occur on your network and no data will be sent to SolarWinds.Net. You will need to download and install the SNMP Assistant before scanning.

IF-MIB :: ifPhysAddress

Name ifPhysAddress

Oid 1.3.6.1.2.1.2.2.1.6

Path iso . org . dod . internet . mgmt . mib-2 . interfaces . ifTable . ifEntry . ifPhysAddress

Type PhysAddress

Display-Hint 1x:

Access read-only

Status current

Description
The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.

< Back (IF-MIB)

What did you think of this topic?

Privacy Statement | Terms of Use | EULA | Contact | Site Map

Prices displayed do not reflect international pricing unless otherwise stated. Please see our international price list for current pricing specific to your location. All prices are subject to change without notice.

© 2003-2008 SolarWinds.net, Inc. All Rights Reserved. SolarWinds®, the SolarWinds logo, ipMonitor®, LANsurveyor®, and Orion® are among the trademarks or registered trademarks of the company in the United States and/or other countries. All other trademarks are property of their respective owners.

IP Address or Domain Name:

Note: Traffic will only occur on your network and no data will be sent to SolarWinds.Net. You will need to download and install the SNMP Assistant before scanning.

Name	ifPhysAddress
Oid	1.3.6.1.2.1.2.2.1.6
Path	iso . org . dod . internet . mgmt . mib-2 . interfaces . ifTable . ifEntry . ifPhysAddress
Type	PhysAddress
Display-Hint	1x:
Access	read-only
Status	current
Description
The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.