This MIB allows management of redundancy of CPU and switch cards for the Catalyst 8540 switch, and other products with similar implementations.
Welcome: Guest
Search for:
in
SNMP Legend
Partial Branch
String
Counter
Integer
Enumerated Value
IP Address
Gauge
Time-Ticks
Object Identifier
Table
Row
Row Extension
Row-Key
Object Group
Trap
SNMP Center > Mibs > Oid-Tree View
iso (1)
org (3)
dod (6)
internet (1)
private (4)
enterprises (1)
cisco (9)
ciscoMgmt (9)
CISCO-C8500-REDUNDANCY-MIB: Cisco Cat8540MSR Redundancy Management
iso (1)org (3)dod (6)internet (1)private (4)enterprises (1)cisco (9)ciscoMgmt (9)
ccrCpuTable
There is an entry in this table for each slot that can hold a CPU card.
ccrCpuEntry
Redundancy information for a CPU card.
ccrCpuSlotIndex
Identifies a chassis slot.
ccrCpuMode
The redundancy mode of this CPU card.
ccrCpuStatus
The operational status of this CPU card.
ccrSyncConfigOnSet
The device's running-configuration and startup-configuration both reside on the active CPU card. This object indicates whether these configurations should be copied from the active CPU to the standby CPU whenever they change. It is acceptable to copy either, both, or neither.
ccrSwitchTable
There is an entry in this table for each slot that can hold a switch card. A 'switch card' is a card that
contains the ATM switch fabric.
contains the ATM switch fabric.
ccrSwitchEntry
Redundancy information for a switch card.
ccrSwitchSlotIndex
Identifies a chassis slot.
ccrSwitchMode
The redundancy mode of this switch card.
ccrSwitchStatus
The operational status of this switch card.
ccrSwitchLastSwitchoverTime
The value of sysUpTime at the last switchover of the switch cards.
The value is zero if there was no switchover since agent initialization.
The value is zero if there was no switchover since agent initialization.
ccrSwitchLastSwitchoverReason
The reason for the last switch card switchover.
The value is none(1) if there was no switchover since agent initialization.
The value is none(1) if there was no switchover since agent initialization.
ccrSwitchBw
The switching capacity (i.e., bandwidth) of the switch fabric. tenGbps(1) - 10 Gigabits/sec twentyGbps(2) - 20 Gigabits/sec.
ccrDesiredSwitchBw
The desired switching capacity (i.e., bandwidth) of the switch fabric. tenGbps(1) - 10 Gigabits/sec twentyGbps(2) - 20 Gigabits/sec
If the value configured by writing to this object is
supported by the device, it will be applied at the next
reboot. The speed at which the switch fabric is currently
operating is reflected by the value of ccrSwitchBw.
If the value configured by writing to this object is
supported by the device, it will be applied at the next
reboot. The speed at which the switch fabric is currently
operating is reflected by the value of ccrSwitchBw.
ccrCpuStatusChange
This notification is generated when the value of ccrCpuStatus changes for a CPU card.
The varbind indicates the current status of the affected card.
The varbind indicates the current status of the affected card.
ccrSwitchStatusChange
This notification is generated when the value of ccrSwitchStatus changes for a switch card.
The varbind indicates the current status of the affected card.
The varbind indicates the current status of the affected card.
ccrSwitchModeChange
This notification is generated when the value of ccrSwitchMode changes from active(1) to either standby(2) or unused(3) or notPresent(4). The varbind indicates the current mode of the affected card.
ciscoC8500RedundancyMIBCompliance
The compliance statement for Cisco agents which implement the CISCO-C8500-REDUNDANCY-MIB.
ccrCpuMibGroup
A collection of objects providing the ability to manage CPU card redundancy.
ccrSwitchMibGroup
A collection of objects providing the ability to manage Switch Fabric card redundancy.
< Back (CISCO-C8500-REDUNDANCY-MIB)
