-- *------------------------------------------------------------------
-- * ALTIGA-SYNC-STATS-MIB.my:  Altiga Sync Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-SYNC-STATS-MIB DEFINITIONS ::= BEGIN

  IMPORTS
     MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
        FROM SNMPv2-SMI
     RowStatus
        FROM SNMPv2-TC
     OBJECT-GROUP, MODULE-COMPLIANCE
        FROM SNMPv2-CONF
     alStatsSync, alSyncGroup
        FROM ALTIGA-MIB
     alSyncMibModule
        FROM ALTIGA-GLOBAL-REG
     InterfaceIndex
        FROM IF-MIB;

  altigaSyncStatsMibModule MODULE-IDENTITY
     LAST-UPDATED   "200209051300Z"
     ORGANIZATION   "Cisco Systems, Inc."
     CONTACT-INFO
        "Cisco Systems
         170 W Tasman Drive
         San Jose, CA  95134
         USA

         Tel: +1 800 553-NETS
         E-mail: cs-cvpn3000@cisco.com"

     DESCRIPTION
        "The Altiga Sync Statistics MIB models counters and objects
         that are of management interest.

         Acronyms
         The following acronyms are used in this document:

           CRC:        Cyclic Redundancy Check

           HDLC:       High-level Data Link Control

           MIB:        Management Information Base

           MTU:        Maximum Transmission Unit

        "

       REVISION "200209051300Z"
       DESCRIPTION
               "Added module compliance."

       REVISION "200207100000Z"
       DESCRIPTION
               "Updated with new header"

     ::= { alSyncMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

alStatsSyncGlobal OBJECT IDENTIFIER ::= { alStatsSync 1 }

alSyncStatsTable     OBJECT-TYPE
  SYNTAX         SEQUENCE OF AlSyncStatsEntry
  MAX-ACCESS     not-accessible
  STATUS         current
  DESCRIPTION
     "The SYNC interface statistics MIB."
  ::= { alStatsSync 2 }

alSyncStatsEntry     OBJECT-TYPE
  SYNTAX         AlSyncStatsEntry
  MAX-ACCESS     not-accessible
  STATUS         current
  DESCRIPTION
     "An entry the alSyncStatsTable."
  INDEX    { alSyncStatsSlot, alSyncStatsConn, alSyncStatsChannel }
  ::= { alSyncStatsTable 1 }

AlSyncStatsEntry ::= SEQUENCE {
  alSyncStatsRowStatus                RowStatus,
  alSyncStatsSlot                     Integer32,
  alSyncStatsConn                     Integer32,
  alSyncStatsChannel                  Integer32,
  alSyncStatsIfIndex                  InterfaceIndex,
  alSyncStatsPortState                INTEGER,
  alSyncStatsRxFrames                 Counter32,
  alSyncStatsRxOctets                 Counter32,
  alSyncStatsRxReplenFails            Counter32,
  alSyncStatsRxClockErrors            Counter32,
  alSyncStatsRxDpllErrors             Counter32,
  alSyncStatsRxFrameTooLongErrors     Counter32,
  alSyncStatsRxFrameOctetAlignErrors  Counter32,
  alSyncStatsRxAbortErrors            Counter32,
  alSyncStatsRxCrcErrors              Counter32,
  alSyncStatsRxRcvrOverrunErrors      Counter32,
  alSyncStatsTxFrames                 Counter32,
  alSyncStatsTxOctets                 Counter32,
  alSyncStatsTxRingFullDropsErrors    Counter32,
  alSyncStatsTxClockErrors            Counter32,
  alSyncStatsTxFrameTooLongErrors     Counter32,
  alSyncStatsTxUnderrunErrors         Counter32
}

alSyncStatsRowStatus    OBJECT-TYPE
  SYNTAX         RowStatus
  MAX-ACCESS     read-create
  STATUS         current
  DESCRIPTION
     "The status of this row."
  ::= { alSyncStatsEntry 1 }

alSyncStatsSlot         OBJECT-TYPE
  SYNTAX         Integer32 (0..2147483647)
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The physical slot for this Sync port. Part of the index."
  ::= { alSyncStatsEntry 2 }

alSyncStatsConn         OBJECT-TYPE
  SYNTAX         Integer32 (0..2147483647)
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The physical connector for this Sync port. Part of the index."
  ::= { alSyncStatsEntry 3 }

alSyncStatsChannel      OBJECT-TYPE
  SYNTAX         Integer32 (0..2147483647)
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The virtual channel for this Sync port. Part of the index."
  ::= { alSyncStatsEntry 4 }

alSyncStatsIfIndex      OBJECT-TYPE
  SYNTAX         InterfaceIndex
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The IfIndex of this SYNC slot/conn/channel. This is
      configured, but configuration is not available via
      SNMP."
  ::= { alSyncStatsEntry 5 }

alSyncStatsPortState OBJECT-TYPE
  SYNTAX         INTEGER {
                    init(1),      -- port is coming up
                    running(2),   -- port has finished initialization
                                  -- and is waiting to transition to
                                  -- data state
                    up(3),        -- ready to pass packets
                    down(4)       -- port is down, unable to pass
                                  -- packets
                 }
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The current operational state of the interface.
      The init(1) state indicates the port is in the state
      of trying to come up. It will transition to running(2)
      once initialization is complete. up(3) indicates the
      interface is capable of passing packets. down(4) indicates
      the interface is no longer capable of passing packets."
  ::= { alSyncStatsEntry 6 }

alSyncStatsRxFrames     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of frames received on this HDLC interface."
  ::= { alSyncStatsEntry 7 }

alSyncStatsRxOctets     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of octets received on this HDLC interface."
  ::= { alSyncStatsEntry 8 }

alSyncStatsRxReplenFails   OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of times receive buffers could not be allocated
     on this HDLC interface."
  ::= { alSyncStatsEntry 9 }

alSyncStatsRxClockErrors   OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of clock errors on this HDLC interface."
  ::= { alSyncStatsEntry 10 }

alSyncStatsRxDpllErrors OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of DPLL errors received on this HDLC interface."
  ::= { alSyncStatsEntry 11 }

alSyncStatsRxFrameTooLongErrors     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of received long frame errors received on this
      HDLC interface."
  ::= { alSyncStatsEntry 12 }

alSyncStatsRxFrameOctetAlignErrors     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of received long frame errors received on
      this HDLC interface."
  ::= { alSyncStatsEntry 13 }

alSyncStatsRxAbortErrors      OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of received abort errors received on
      this HDLC interface."
  ::= { alSyncStatsEntry 14 }

alSyncStatsRxCrcErrors     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of received CRC errors received on
      this HDLC interface."
  ::= { alSyncStatsEntry 15 }

alSyncStatsRxRcvrOverrunErrors      OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of received CRC errors received on
      this HDLC interface."
  ::= { alSyncStatsEntry 16 }

alSyncStatsTxFrames     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of transmitted frames on this HDLC interface."
  ::= { alSyncStatsEntry 17 }

alSyncStatsTxOctets     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of transmitted frames on this HDLC interface."
  ::= { alSyncStatsEntry 18 }

alSyncStatsTxRingFullDropsErrors    OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of frames dropped on this HDLC interface because
      the transmit ring was full."
  ::= { alSyncStatsEntry 19 }

alSyncStatsTxClockErrors      OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of transmit clock errors on this HDLC interface."
  ::= { alSyncStatsEntry 20 }

alSyncStatsTxFrameTooLongErrors     OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of frames dropped this HDLC interface because they
      were long than the interface's MTU."
  ::= { alSyncStatsEntry 21 }

alSyncStatsTxUnderrunErrors      OBJECT-TYPE
  SYNTAX         Counter32
  MAX-ACCESS     read-only
  STATUS         current
  DESCRIPTION
     "The number of transmitter underruns on this HDLC interface."
  ::= { alSyncStatsEntry 22 }

altigaSyncStatsMibConformance OBJECT IDENTIFIER
  ::= { altigaSyncStatsMibModule 1 }

altigaSyncStatsMibCompliances OBJECT IDENTIFIER
  ::= { altigaSyncStatsMibConformance 1 }

altigaSyncStatsMibCompliance MODULE-COMPLIANCE
  STATUS         current
  DESCRIPTION
     "The compliance statement for agents which
      implement the Altiga Sync Statistics MIB."
  MODULE
  MANDATORY-GROUPS {
     altigaSyncStatsGroup
  }
  ::= { altigaSyncStatsMibCompliances 1 }

altigaSyncStatsGroup OBJECT-GROUP
  OBJECTS
  {
     alSyncStatsRowStatus,
     alSyncStatsSlot,
     alSyncStatsConn,
     alSyncStatsChannel,
     alSyncStatsIfIndex,
     alSyncStatsPortState,
     alSyncStatsRxFrames,
     alSyncStatsRxOctets,
     alSyncStatsRxReplenFails,
     alSyncStatsRxClockErrors,
     alSyncStatsRxDpllErrors,
     alSyncStatsRxFrameTooLongErrors,
     alSyncStatsRxFrameOctetAlignErrors,
     alSyncStatsRxAbortErrors,
     alSyncStatsRxCrcErrors,
     alSyncStatsRxRcvrOverrunErrors,
     alSyncStatsTxFrames,
     alSyncStatsTxOctets,
     alSyncStatsTxRingFullDropsErrors,
     alSyncStatsTxClockErrors,
     alSyncStatsTxFrameTooLongErrors,
     alSyncStatsTxUnderrunErrors
  }
  STATUS   current
  DESCRIPTION
         "The objects for SYNC configuration."
  ::= { alSyncGroup 2 }

END