This MIB module contains the Altiga L2TP Statistics MIB models counters and objects that are of management interest for L2TP tunnels.
Welcome: Guest
Search for:
in
SNMP Legend
Partial Branch
String
Counter
Integer
Enumerated Value
IP Address
Gauge
Time-Ticks
Object Identifier
Table
Row
Row Extension
Row-Key
Object Group
Trap
SNMP Center > Mibs > Oid-Tree View
iso (1)
org (3)
dod (6)
internet (1)
private (4)
enterprises (1)
altigaRoot (3076)
altigaReg (1)
altigaModules (1)
alL2tpMibModule (21)
altigaGeneric (2)
altigaMib (1)
altigaConfs (1)
altigaGroups (1)
alL2tpGroup (16)
altigaStats (2)
alStatsL2tp (16)
ALTIGA-L2TP-STATS-MIB: Cisco Altiga L2TP Statistics
iso (1)org (3)dod (6)internet (1)private (4)enterprises (1)altigaRoot (3076)altigaReg (1)altigaModules (1)alL2tpMibModule (21)
altigaGeneric (2)altigaMib (1)altigaConfs (1)altigaGroups (1)alL2tpGroup (16)
altigaStats (2)alStatsL2tp (16)alL2tpStatsLocalProtVers
This object describes the protocol version and revision of the local implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
alL2tpStatsVendorName
This object identifies the Vendor name.
alL2tpStatsFirmwareRev
This object defines the firmware revision.
alL2tpStatsTotalTunnels
This object returns the total number of tunnels that have successfully reached the established state.
alL2tpStatsFailedTunnels
This object returns the number of tunnels that failed to reach the established state.
alL2tpStatsFailedAuthentications
This object returns the number of failed tunnel connection attempts because the tunnel peer failed authentication.
alL2tpStatsActiveTunnels
This object returns the number of tunnels that are currently active.
alL2tpStatsMaxTunnels
The maximum number of simultaneously active L2TP tunnels since the system was booted.
alL2tpStatsTotalSessions
This object returns the total number of sessions that have successfully reached the established state.
alL2tpStatsFailedSessions
This object returns the number of sessions that failed to reach the established state for this tunnel domain.
alL2tpStatsActiveSessions
This object returns the number of sessions that are currently active.
alL2tpStatsMaxSessions
The maximum number of simultaneously active L2TP sessions since the system was booted.
alL2tpStatsControlRecvOctets
This object returns the number of control channel octets received.
alL2tpStatsControlRecvPackets
This object returns the number of control packets received.
alL2tpStatsControlRecvDiscards
This object returns the number of control packets received that were discarded.
alL2tpStatsControlSendOctets
This object returns the number of control channel octets that were transmitted to tunnel endpoints.
alL2tpStatsControlSendPackets
This object returns the number of control packets that were transmitted to tunnel endpoints.
alL2tpStatsPayloadRecvOctets
This object returns the number of payload channel octets that were received.
alL2tpStatsPayloadRecvPackets
This object returns the number of payload packets that were received.
alL2tpStatsPayloadRecvDiscards
This object returns the number of received payload packets that were discarded.
alL2tpStatsPayloadSendOctets
This object returns the number of payload channel octets that were transmitted to tunnel peers.
alL2tpStatsPayloadSendPackets
This object returns the number of payload packets that were transmitted to tunnel peers.
alL2tpStatsTunnelTable
The L2TP tunnel status and statistics table.
alL2tpStatsTunnelEntry
An entry in the alL2tpStatsTunnelTable.
alL2tpStatsTunnelRowStatus
The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel.
alL2tpStatsTunnelPeerIpAddr
The peer's IP address for this tunnel.
alL2tpStatsTunnelLocalTID
This object contains the local tunnel Identifier.
alL2tpStatsTunnelRemoteTID
This object contains the remote tunnel Identifier.
alL2tpStatsTunnelState
This field contains the current state of the control tunnel.
alL2tpStatsTunnelInitiated
This object indicates whether the tunnel was initiated locally or by the remote tunnel peer.
alL2tpStatsTunnelRemoteHostName
This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
alL2tpStatsTunnelRemoteVendorName
This object identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle this object should maintain its value from the last time it was connected.
alL2tpStatsTunnelRemoteFirmwareRevision
This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected.
alL2tpStatsTunnelRemoteProtocolVersion
This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
alL2tpStatsTunnelInitialRemoteRWS
This object contains the initial remote peer's receive window size as indicated by the tunnel peer (in the RWS AVP) during the tunnel establishment phase. If the tunnel is idle this object should maintain its value from the last time it was connected.
alL2tpStatsTunnelBearerCapabilities
This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
alL2tpStatsTunnelFramingCapabilities
This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.
alL2tpStatsTunnelControlRecvPackets
This object contains the number of control packets received on the tunnel.
alL2tpStatsTunnelControlRecvDiscards
This object returns the number of received payload packets that were discarded.
alL2tpStatsTunnelControlRecvZLB
This object returns a count of the number of Zero Length Body control packet acknowledgement packets that were received.
alL2tpStatsTunnelControlOutOfSequence
This object returns a count of the number of control packets that were not received in the correct order (as per the sequence number) on this tunnel.
alL2tpStatsTunnelControlOutOfWindow
This object contains the number of control packets that were received outside of the offered receive window. It is implementation specific as to whether these packets are queued or discarded.
alL2tpStatsTunnelControlSendPackets
This object contains the number of control packets that were transmitted to the tunnel peer.
alL2tpStatsTunnelControlSendZLB
This object contains the number of Zero Length Body control packets that were transmitted to the tunnel peer.
alL2tpStatsTunnelControlAckTimeouts
This object returns a count of the number of control packet timeouts due to the lack of a timely acknowledgement from the tunnel peer.
alL2tpStatsTunnelCurrentRemoteRWS
This object contains the current remote receive window size as determined by the local flow control mechanism employed.
alL2tpStatsTunnelSendSeq
This object contains the next send sequence number for the control channel.
alL2tpStatsTunnelSendSeqAck
This object contains the send sequence number that the tunnel peer has acknowledged for the control channel. The flow control state can be determined by subtracting the l2tpTunnelStatsSendSeq from alL2tpStatsTunnelSendSeqAck and comparing this value to l2tpTunnelStatsCurrentRemoteRWS.
alL2tpStatsTunnelRecvSeq
This object contains the next receive sequence number expected to be received on this control channel.
alL2tpStatsTunnelRecvSeqAck
This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the control channel.
alL2tpStatsTunnelTotalSessions
This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
alL2tpStatsTunnelFailedSessions
This object contains the total number of sessions that were initiated but failed to reach the established phase.
alL2tpStatsTunnelActiveSessions
This object contains the total number of sessions for this tunnel.
alL2tpStatsTunnelLastResultCode
This object contains the last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.
alL2tpStatsTunnelLastErrorCode
This object contains the last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.
alL2tpStatsTunnelLastErrorMessage
This object contains the last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.
alL2tpStatsSessionTable
The L2TP session status and statistics table.
alL2tpStatsSessionEntry
An L2TP session interface stats entry.
alL2tpStatsSessionRowStatus
The status of this row. Used to terminate the session, cannot be used to create a session.
alL2tpStatsSessionIfIndex
This value for this object is equal to the value of ifIndex of the Interfaces MIB for session interfaces of type L2TP.
alL2tpStatsSessionTID
This object contains the control channel tunnel identifier for this session.
alL2tpStatsSessionLocalCID
This object contains the local call identifier for the session.
alL2tpStatsSessionRemoteCID
This object contains the remote call identifier for the session.
alL2tpStatsSessionUserName
This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.
alL2tpStatsSessionState
This object contains the current state of the session.
alL2tpStatsSessionCallType
This object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to the tunnel peer (the LNS). Note that tunnel peers can be both LAC and LNS simultaneously.
alL2tpStatsSessionCallSerialNumber
This object contains the serial number that has been assigned to this session.
alL2tpStatsSessionTxConnectSpeed
This object returns the last known transmit baud rate for this session.
alL2tpStatsSessionRxConnectSpeed
This object returns the last known receive baud rate for this session.
alL2tpStatsSessionCallBearerType
This object describes the bearer type of this session.
alL2tpStatsSessionFramingType
This object describes the framing type of this session.
alL2tpStatsSessionPhysChanId
This object contains the physical channel identifier for the session.
alL2tpStatsSessionDNIS
This object identifies the Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided then a null string will be returned.
alL2tpStatsSessionCLID
This object identifies the Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided then a null string will be returned.
alL2tpStatsSessionSubAddress
This object identifies the Sub Address that the LAC obtained from the network for the session. If no Sub Address was provided then a null string will be returned.
alL2tpStatsSessionPrivateGroupID
This object identifies the Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided then a null string will be returned.
alL2tpStatsSessionProxyLcp
Indicates whether the LAC performed proxy LCP for this session.
alL2tpStatsSessionAuthMethod
This object contains the proxy authentication method employed by the LAC for the session. If l2tpSessionProxyLcp is false(2) this object should not be interpreted.
alL2tpStatsSessionLocalRWS
This object returns the local send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
alL2tpStatsSessionRemoteInitialRWS
This object returns the initial remote send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
alL2tpStatsSessionRemotePPD
This object contains the Packet Processing Delay for the session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object should not be interpreted.
alL2tpStatsSessionSequencingState
This object defines which tunnel peers have requested payload sequencing. The value of both(4) indicates that both peers have requested payload sequencing.
alL2tpStatsSessionRecvOctets
This object returns the total number payload octets received for this session.
alL2tpStatsSessionRecvPackets
This object returns the total number of payload packets received for this session.
alL2tpStatsSessionRecvDiscards
This object returns the total number of payload packets received that were discarded for this session.
alL2tpStatsSessionRecvZLB
This object returns the total number of Zero Length Body acknowlegement payload packets received for this session.
alL2tpStatsSessionOutSequence
This object returns the total number of packets received for this session which were received out of sequence.
alL2tpStatsSessionOutOfWindow
This object returns a count of the number of payload packets that were received outside of the expected window for this session.
alL2tpStatsSessionSendOctets
This object returns the total number of payload octets transmitted for this session.
alL2tpStatsSessionSendPackets
This object returns the total number of payload packets transmitted for this session.
alL2tpStatsSessionSendZLB
This object returns the total number of Zero Length Body acknowledgement packets transmitted for this session.
alL2tpStatsSessionAckTimeouts
This object returns the total number of acknowledgement timeouts seen on payload packets for this session.
alL2tpStatsSessionReassemblyTimeouts
This object returns the number of reassembly time outs that have occured for this session.
alL2tpStatsSessionCurrentRemoteRWS
This object contains the current remote receive window size as determined by the local flow control mechanism employed.
alL2tpStatsSessionSendSeq
This object contains the next send sequence number for for this session.
alL2tpStatsSessionSendSeqAck
This object contains the send sequence number that the tunnel peer has acknowledged for the payload channel. The flow control state can be determined by subtracting the alL2tpStatsSessionSendSeq from alL2tpStatsSessionSendSeqAck and comparing this value to l2tpSesssionStatsCurrentRemoteRWS.
alL2tpStatsSessionSendSeqResets
This object contains the total number of sequence number resets (payload packets with the R-bit set) sent on this session.
alL2tpStatsSessionRecvSeq
This object contains the next receive sequence number expected to be received on this session.
alL2tpStatsSessionRecvSeqAck
This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the session.
alL2tpStatsSessionRecvSeqResets
This object contains the total number of sequence number resets (payload packets with the R-bit set) received on this session.
alL2tpStatsSessionTunnelPeerIpAddr
The peer's IP address for the tunnel to which this session belongs.
altigaL2tpStatsMibCompliance
The compliance statement for agents which implement the Altiga L2TP Statistics MIB.
altigaL2tpStatsGroup
The objects for L2TP statistics.
altigaL2tpStatsDepGroup
The deprecated objects for L2TP statistics.
< Back (ALTIGA-L2TP-STATS-MIB)
