Descriptions of managed objects for ADSL DMT line interfaces.
Welcome: Guest |
Sign-In
Search for:
in
| NOTE: This site is no longer maintained. Upgrade to ipMonitor v9 here. |
SNMP Legend
Partial Branch
String
Counter
Integer
Enumerated Value
IP Address
Gauge
Time-Ticks
Object Identifier
Table
Row
Row Extension
Row-Key
Object Group
Trap
SNMP Center > Mibs > Oid-Tree View
iso (1)
org (3)
dod (6)
internet (1)
mgmt (2)
mib-2 (1)
transmission (10)
adslMIB (94)
adslLineMib (1)
adslMibObjects (1)
adslLCSMib (16)
ADSL-DMT-LINE-MIB: Cisco ADSL DMT Line Interfaces
iso (1)org (3)dod (6)internet (1)mgmt (2)mib-2 (1)transmission (10)adslMIB (94)adslLineMib (1)adslMibObjects (1)adslLCSMib (16)
adslLineDmtTable
This table extends the adslLineTable and contains common attributes describing both ends of ADSL lines supported by the system.
adslLineDmtEntry
A set of common attributes describing both ends of an ADSL line supported by the system. There exist an entry for each ifEntry with an ifType of adsl(94).
adslLineDmtTrellis
Reports whether the Trellis coding is used on the DMT line. Use of trellis coding is determined at line initialization with C-MSGS1 and R-MSGS1 exchanges and will not change until the line is re-initialized.
adslLineDmtEOC
Reports whether the eoc can support autonomous data streaming mode or only transaction mode. After initialization, unknown is reported until sufficient autonomous eoc messages have been transmitted to determine the true capability of both ATUs.
adslAtucDmtPhysTable
This table extends the adslAtucPhysTable and contains specific physical layer parameters for the ATU-C class devices supported by the system.
adslAtucDmtPhysEntry
A set of physical-layer parameters for an ATU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).
adslAtucDmtIssue
Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-C is currently operating to. The issue number will be fixed by the hardware and is transmitted by the ATU-C in C-MSGS1 during initialization.
adslAtucDmtState
Reports current state of the ATU-C DMT transceiver. The current state can change dynamically. The SNMP agent reports the state after querying the ATU-C state machine.
adslAtucDmtInterleavePath
Reports bearer channel of downstream interleaved path.
adslAtucDmtFastPath
Reports bearer channel of downstream fast path.
adslAturDmtPhysTable
This table extends the adslAturPhysTable and contains physical layer parameters for the ATU-R class devices supported by the system.
adslAturDmtPhysEntry
A set of physical-layer parameters for an ATU-R class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).
adslAturDmtIssue
Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-R is currently operating to. The issue number will be fixed by the hardware and is transmitted by the ATU-R in R-MSGS1 during initialization.
adslAturDmtState
Reports current state of the ATU-R DMT transceiver. The current state can change dynamically. ATU-R state is reported by the SNMP agent at the ATU-C which infers the state depending on the ATU-C state. When the inference cannot be made, unknown state is returned.
adslAturDmtInterleavePath
Reports bearer channel of upstream interleaved path.
adslAturDmtFastPath
Reports bearer channel of upstream fast path.
adslLineDmtConfProfileTable
This table extends the adslLineConfProfileTable and contains ADSL DMT line configuration information.
adslLineDmtConfProfileEntry
A configuration profile containing ADSL DMT line configuration information.
adslAtucDmtConfFreqBins
A string of 32 bits to enable/disable the incoming DMT frequency bins that the ATU-C receiver monitors. Each bit controls one bin with the first bit of the first octet controlling sub-carrier zero (lowest frequency bin). A bit set to 1 disables reception of the specified sub- carrier frequency bin end a 0 enables reception.
adslAturDmtConfFreqBins
A string of 256 bits to enable/disable the incoming DMT frequency bins that the ATU-R receiver should monitor after the next activation. The mechanism to pass adslAturDMTConfFreqBins to the ATU-R is vendor specific. Each bit controls one bin with the first bit of the first octet controlling sub-carrier zero (lowest frequency bin). A bit set to 1 disables reception of the specified sub-carrier frequency bin end a 0 enables reception.
adslLineDmtConfMode
Defines the operational mode of the DMT ADSL transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges.
adslLineDmtConfTrellis
Enables the Trellis coder of the DMT transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges.
adslLineDmtConfEOC
Defines the embedded operations channel mode for the DMT ADSL line.
adslAtucDmtConfInterleavePath
Target channel for downstream interleave data path.
adslAtucDmtConfFastPath
Target channel for downstream fast data path.
adslAturDmtConfInterleavePath
Target channel for upstream interleave data path.
adslAturDmtConfFastPath
Target channel for upstream fast data path.
adslDMTLineMibCompliance
The compliance statement for SNMP entities which have ADSL DMT interfaces.
adslLineDmtMIBAturCompliance
The compliance statement for SNMP entities which manage ADSL DMT ATU-R interfaces.
adslLineDmtGroup
A collection of managed objects defining the attributes of an ADSL line supportings modems using the DMT line code.
adslAtucDmtPhysGroup
A collection of managed objects defining the physical-layer parameters of an ATU-C using the DMT line code.
adslAturDmtPhysGroup
A collection of managed objects defining the physical-layer parameters of an ATU-R using the DMT line code.
adslLineDmtConfProfileGroup
A collection of managed objects defining the line configuration information associated with one or more ADSL ATU class devices implementing the DMT line code.
